Paladin PT-540
-
Well, I don't have the money to buy one, I did find a few of them for sale at overstocked for $115.
Nate
-
@ducttapetech said:
Well, I don't have the money to buy one, I did find a few of them for sale at overstocked for $115.Nate
Got room for me in that boat?
-
I don't have money for this either. I've had this for several years.
-
The PT-540 I purchased this week arrived today. My first SOG multi (third if considering the PowerLock and PowerAssist I returned to Costco for poor quality a few years back).
Its picture from eBay

Except for the missing handle covers and the broken file, there is very little evident that other components were used. I really like the reinforced hex divers on the handle. I wish Leatherman have the same feature on the Super Tool series.Anyway, a question for SOG gurus on MTO: Do cover handles and file sold on SOG website fit this tool? Do the PT-540 and PT-525 use the same handle covers?
-
The PT540 is larger than the 525, and the PowerLock, and is warrantied through Paladin (and only for a year!), not SOG. Im pretty sure the file is just a standard SOG file with flathead end, which are available for purchase from the SOG website.
The handle covers are another matter. I have no clue if they are the same ones on the PowerLock, but if they are, SOG's warranty department will send you a set for free, if you ask nicely. They are great in that regard. Just ask them for a set of PowerLock 2.0 covers, and they will take care of you.
-
@sLaughterMed said:
The PT540 is larger than the 525, and the PowerLock, and is warrantied through Paladin (and only for a year!), not SOG. Im pretty sure the file is just a standard SOG file with flathead end, which are available for purchase from the SOG website.The handle covers are another matter. I have no clue if they are the same ones on the PowerLock, but if they are, SOG's warranty department will send you a set for free, if you ask nicely. They are great in that regard. Just ask them for a set of PowerLock 2.0 covers, and they will take care of you.
Thank you for chipping in. I look at the product brochures and online pictures, and find the covers on the 540 and 525 to be different. The 540 covers may have detents to keep them from flapping (notice 2 holes on each side of the handles). I can only find part #6509, which seems to be of the 525. The question is whether this 525 cover or the PowerLock 2.0 covers will fit securely on the 540.
I honestly do not like the cover design on SOG multis. However, in this case, I would like to bring this tool back to its original condition. Furthermore, the implements are a little loose inside the channels. I will try to tighten them up a bit to see if it helps.
BTW, are you looking for a PT-540? What was the MSRP of this thing?
-
The PT540 is larger than the 525, and the PowerLock, and is warrantied through Paladin (and only for a year!), not SOG. Im pretty sure the file is just a standard SOG file with flathead end, which are available for purchase from the SOG website.
The handle covers are another matter. I have no clue if they are the same ones on the PowerLock, but if they are, SOG's warranty department will send you a set for free, if you ask nicely. They are great in that regard. Just ask them for a set of PowerLock 2.0 covers, and they will take care of you.
Thank you for chipping in. I look at the product brochures and online pictures, and find the covers on the 540 and 525 to be different. The 540 covers may have detents to keep them from flapping (notice 2 holes on each side of the handles). I can only find part #6509, which seems to be of the 525. The question is whether this 525 cover or the PowerLock 2.0 covers will fit securely on the 540.
I honestly do not like the cover design on SOG multis. However, in this case, I would like to bring this tool back to its original condition. Furthermore, the implements are a little loose inside the channels. I will try to tighten them up a bit to see if it helps.
BTW, are you looking for a PT-540? What was the MSRP of this thing?
nope, not looking for a PT540, I just like em. According to this post here: /topic/1693 the PT-540 could be found for as little as $110 in some places. Overstock.com lists a price of $126.49, although they are obviously out of stock.
The PowerLock 2.0 covers also have those divots at both ends to keep the covers on.
-
I just had a look at my Powerlock v1 ( I don't have a 2.0), PT-525 and PT-540. The PT-540 is 2mm wider in the body than my PL 1.0 and PT-525 so I think only the PT-540 covers will work on a PT-540.
I haven't seen any retailers selling new PT-540s for a couple of years now.
-
@gregozedobe said:
I just had a look at my Powerlock v1 ( I don't have a 2.0), PT-525 and PT-540. The PT-540 is 2mm wider in the body than my PL 1.0 and PT-525 so I think only the PT-540 covers will work on a PT-540.I haven't seen any retailers selling new PT-540s for a couple of years now.
Do you have a PowerAssist to check? The PA seems to have the same cover style on the handle with 6 components.
I got the idea from this post: http://www.bladeforums.com/forums/showthread.php/528770-New-PT540-(expanded-PowerLock)?s=83164b5091aa6b0052066af7f4e32626&p=5279815#post5279815 -
I just had a look at my Powerlock v1 ( I don't have a 2.0), PT-525 and PT-540. The PT-540 is 2mm wider in the body than my PL 1.0 and PT-525 so I think only the PT-540 covers will work on a PT-540.
I haven't seen any retailers selling new PT-540s for a couple of years now.
Do you have a PowerAssist to check? The PA seems to have the same cover style on the handle with 6 components.
I got the idea from this post: http://www.bladeforums.com/forums/showthread.php/528770-New-PT540-(expanded-PowerLock)?s=83164b5091aa6b0052066af7f4e32626&p=5279815#post5279815Wow I dont know how I didn't realize the PowerLock 2.0 and PowetAssist have different handle covers. Sadly,I dont have a powerLock or Paladin to compare my PowerAssist.
-
@sLaughterMed said:
.... Sadly,I dont have a powerLock or Paladin to compare my PowerAssist.And I don't have a PowerAssist to compare with my PL or Paladins.
If it helps the PT-540 covers are 75mm long and measure 17-17.1mm on the inside (the PT-540 handles are around 16.8-16.9mm wide).
-
How I wish you two, sLaughterMed and gregozedobe, neighbors
Using a cheap pair of calipers to measure the PT-540 handles:
.67" (17.0mm) wide - 2.69" (68.3mm) spacing between two holes .1" (2.5mm) diameter for pivot hole toward the pliers, and .08" (2.0mm) diameter on the other hole.sLaughterMed- any chance you can measure the thickness and hole spacing on the PowerAssist as wel as its cover?
Thanks for your help, gents.
-
@chrono said:
How I wish you two, sLaughterMed and gregozedobe, neighbors
Using a cheap pair of calipers to measure the PT-540 handles:
.67" (17.0mm) wide - 2.69" (68.3mm) spacing between two holes .1" (2.5mm) diameter for pivot hole toward the pliers, and .08" (2.0mm) diameter on the other hole.sLaughterMed- any chance you can measure the thickness and hole spacing on the PowerAssist as wel as its cover?
Thanks for your help, gents.
Ill do my best when my son goes to bed

-
I just recently learnt about some awesomeness of SOG customer serivce including free knife clip replacement, free knife sharpening... My SOG Escape folder lost its clip, so I emailed SOG for the first time yesterday. While at it, I sent another email to their customer service about my cover-less PT-540, and asked if the PowerAssist covers would fit, and how I would be able to obtain them. I received 2 emails today, one for the clip and other for the covers. SOG would send one clip and two PA covers to me. They even noted that the covers would fit, but I might have to bend them a bit for a proper fit.
Wow, that is really awesome how fast they responded and took care of my situations

-
@chrono said:
I just recently learnt about some awesomeness of SOG customer serivce including free knife clip replacement, free knife sharpening... My SOG Escape folder lost its clip, so I emailed SOG for the first time yesterday. While at it, I sent another email to their customer service about my cover-less PT-540, and asked if the PowerAssist covers would fit, and how I would be able to obtain them. I received 2 emails today, one for the clip and other for the covers. SOG would send one clip and two PA covers to me. They even noted that the covers would fit, but I might have to bend them a bit for a proper fit.Wow, that is really awesome how fast they responded and took care of my situations

Good to know that the PowerAssist covers work for the PT540
-
Also really good CS from the sounds of it as well

-
I received the covers from SOG. They mistakenly sent me the PowerLock covers instead of the PowerAssist
The spacing inside the cover channel is thinner than the handle thickness by about the thickness of the sheet metal the handles are made of. So, I cannot do any bending for the covers to fit, as their two edges will just flare out. Furthermore, the pliers are long, and do not go pass the covers' cutouts either. So, to adapt a SOG multi's covers on the PT-540, the cover channels must accept the PT's thickness, as well as the long pliers' noses. I think the PowerAssist covers may fit (based on the amount of tool load, and their looks), but I still have to deal with modifying the cutouts. Only someone with both PowerAssist and PT-540 at hand can confirm this.As this point, I will keep the tool as-is. :-\
-
Bummer

See if they would send the right ones.
-
See if they would send the right ones.
I did ask for the PowerAssist covers, but the customer service replied by saying they did not have an exact match for the PT-540 (duh!), and I had to bend to make them fit. I think the agent did not really looked into the drawings for dimensions, or the employees picking up covers for me could not tell the difference between the PL and PA cover looks and sizes.
Either way, SOG already went extra mile on this issue, as they are not responsible for this tool's warranty. I do not want to pester them and let it go.
(Or maybe I should tell them I have over $1,500 worth of SOG knives, so they can be a lil' nicer? :D )
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login