Paladin PT-540
-
I just had a look at my Powerlock v1 ( I don't have a 2.0), PT-525 and PT-540. The PT-540 is 2mm wider in the body than my PL 1.0 and PT-525 so I think only the PT-540 covers will work on a PT-540.
I haven't seen any retailers selling new PT-540s for a couple of years now.
-
@gregozedobe said:
I just had a look at my Powerlock v1 ( I don't have a 2.0), PT-525 and PT-540. The PT-540 is 2mm wider in the body than my PL 1.0 and PT-525 so I think only the PT-540 covers will work on a PT-540.I haven't seen any retailers selling new PT-540s for a couple of years now.
Do you have a PowerAssist to check? The PA seems to have the same cover style on the handle with 6 components.
I got the idea from this post: http://www.bladeforums.com/forums/showthread.php/528770-New-PT540-(expanded-PowerLock)?s=83164b5091aa6b0052066af7f4e32626&p=5279815#post5279815 -
I just had a look at my Powerlock v1 ( I don't have a 2.0), PT-525 and PT-540. The PT-540 is 2mm wider in the body than my PL 1.0 and PT-525 so I think only the PT-540 covers will work on a PT-540.
I haven't seen any retailers selling new PT-540s for a couple of years now.
Do you have a PowerAssist to check? The PA seems to have the same cover style on the handle with 6 components.
I got the idea from this post: http://www.bladeforums.com/forums/showthread.php/528770-New-PT540-(expanded-PowerLock)?s=83164b5091aa6b0052066af7f4e32626&p=5279815#post5279815Wow I dont know how I didn't realize the PowerLock 2.0 and PowetAssist have different handle covers. Sadly,I dont have a powerLock or Paladin to compare my PowerAssist.
-
@sLaughterMed said:
.... Sadly,I dont have a powerLock or Paladin to compare my PowerAssist.And I don't have a PowerAssist to compare with my PL or Paladins.
If it helps the PT-540 covers are 75mm long and measure 17-17.1mm on the inside (the PT-540 handles are around 16.8-16.9mm wide).
-
How I wish you two, sLaughterMed and gregozedobe, neighbors
Using a cheap pair of calipers to measure the PT-540 handles:
.67" (17.0mm) wide - 2.69" (68.3mm) spacing between two holes .1" (2.5mm) diameter for pivot hole toward the pliers, and .08" (2.0mm) diameter on the other hole.sLaughterMed- any chance you can measure the thickness and hole spacing on the PowerAssist as wel as its cover?
Thanks for your help, gents.
-
@chrono said:
How I wish you two, sLaughterMed and gregozedobe, neighbors
Using a cheap pair of calipers to measure the PT-540 handles:
.67" (17.0mm) wide - 2.69" (68.3mm) spacing between two holes .1" (2.5mm) diameter for pivot hole toward the pliers, and .08" (2.0mm) diameter on the other hole.sLaughterMed- any chance you can measure the thickness and hole spacing on the PowerAssist as wel as its cover?
Thanks for your help, gents.
Ill do my best when my son goes to bed

-
I just recently learnt about some awesomeness of SOG customer serivce including free knife clip replacement, free knife sharpening... My SOG Escape folder lost its clip, so I emailed SOG for the first time yesterday. While at it, I sent another email to their customer service about my cover-less PT-540, and asked if the PowerAssist covers would fit, and how I would be able to obtain them. I received 2 emails today, one for the clip and other for the covers. SOG would send one clip and two PA covers to me. They even noted that the covers would fit, but I might have to bend them a bit for a proper fit.
Wow, that is really awesome how fast they responded and took care of my situations

-
@chrono said:
I just recently learnt about some awesomeness of SOG customer serivce including free knife clip replacement, free knife sharpening... My SOG Escape folder lost its clip, so I emailed SOG for the first time yesterday. While at it, I sent another email to their customer service about my cover-less PT-540, and asked if the PowerAssist covers would fit, and how I would be able to obtain them. I received 2 emails today, one for the clip and other for the covers. SOG would send one clip and two PA covers to me. They even noted that the covers would fit, but I might have to bend them a bit for a proper fit.Wow, that is really awesome how fast they responded and took care of my situations

Good to know that the PowerAssist covers work for the PT540
-
Also really good CS from the sounds of it as well

-
I received the covers from SOG. They mistakenly sent me the PowerLock covers instead of the PowerAssist
The spacing inside the cover channel is thinner than the handle thickness by about the thickness of the sheet metal the handles are made of. So, I cannot do any bending for the covers to fit, as their two edges will just flare out. Furthermore, the pliers are long, and do not go pass the covers' cutouts either. So, to adapt a SOG multi's covers on the PT-540, the cover channels must accept the PT's thickness, as well as the long pliers' noses. I think the PowerAssist covers may fit (based on the amount of tool load, and their looks), but I still have to deal with modifying the cutouts. Only someone with both PowerAssist and PT-540 at hand can confirm this.As this point, I will keep the tool as-is. :-\
-
Bummer

See if they would send the right ones.
-
See if they would send the right ones.
I did ask for the PowerAssist covers, but the customer service replied by saying they did not have an exact match for the PT-540 (duh!), and I had to bend to make them fit. I think the agent did not really looked into the drawings for dimensions, or the employees picking up covers for me could not tell the difference between the PL and PA cover looks and sizes.
Either way, SOG already went extra mile on this issue, as they are not responsible for this tool's warranty. I do not want to pester them and let it go.
(Or maybe I should tell them I have over $1,500 worth of SOG knives, so they can be a lil' nicer? :D )
-
You never know, it's worth asking. Just explain that while you appreciate it, they sent the wrong covers and could they send the right ones.
-
Maybe include some pics in your email, that's get them going.

-
@ReamerPunch said:
Maybe include some pics in your email, that's get them going.
I sent pictures twice, and explained 3 times. Maybe the gentleman read too fast and did not see the difference between PowerAssist and PowerLock. Anyway, I was told a set of PA handle covers are requested for me. Cross my fingers that the picker will not mess up this time.
-
Well, a packet from SOG arrived today. And you can guess, they sent me another set of PowerLock S62 handle covers
This make me think they do not have PowerAssist handle covers at hand as spares, as they are not being offered as accessories on the website.I give up.
(Still, SOG customer service is awesome! I would say they are better than Leatherman in term of human interaction)
-
Is this what you are needing ?
http://www.sogknives.com/type/accessories/powerassist-handle-cover.html

-
@SteveC said:
Is this what you are needing ?http://www.sogknives.com/type/accessories/powerassist-handle-cover.html

Wait... yeah, that's what I "may" need. How I did not find it or think of finding it on their website ??? I guess, because it started with my inquiry as weather the PA covers would fit the PT-540, and the CS rep went ahead and sent me a pair of PL covers, and thing went from there...
I will just buy the covers from them, instead of pestering thr rep again. Hopefully, they will pick the right parts this time. :P
Thanks, Steve.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login