And so it begins.... (My adventures into Alox!)
-
This just getting better and better.
Can't wait to see what you come up with but I'm sure it'll be wonderful.Sent from my E6653 using Tapatalk
-
@Glofindel said:
This just getting better and better.
Can't wait to see what you come up with but I'm sure it'll be wonderful.Sent from my E6653 using Tapatalk
Those were my thoughts exactly, even before I saw yours

-
This just getting better and better.
Can't wait to see what you come up with but I'm sure it'll be wonderful.Sent from my E6653 using Tapatalk
Those were my thoughts exactly, even before I saw yours

Now that I can cut wherever I make in CAD its like the sky is the limit now. Last night I was cutting tweezers slots on the back scale no problems. Then I was thinking maybe there is a better way to store them.. what about just a sliding drawer pocket in the Ti scale that you could stash whatever you want. Make it rotate out from inside the handle with a little latch.
I have to tweak the layout of the pockets a bit still to as I need to leave room to add the build number and date. I want to number all the Ti builds now. My Tormach diamond drag engraver arrived too so Im going to test that out.
-
The gears I see are turning. I imagine a lot of what you thought about will begin to take shape. -
How about a whistle scale, like the 58mm?
Will
-
What about something simple? Going alox was one great choice in my life but you lose out on not only the tweezers, but the toothpick and now a days the pen? Or in some cases the pin, imagine a vic compact, swapping out the corkscrew for a Philips, and also the scales, but now keeping all the little extras! Idk about the pin cause that might be a little too small,, but along with everything else? That would be one heck of a knife!
Now that I think of it the pen might be a little tricky, but with a little work I think it can be doable, just rather then cutting a flat cut make a little bump for restriction, same for the toothpick?
JR -
Alox/Ti scales with a place for the cellidor scale goodies would be most excellent

Sent from my SM-G920R4 using Tapatalk
-
Heres a thought. What about a set of 91mm scales with 2.5mm holes, specifically for using stock parts, and exposed rivets? Bonus points for optional pocket clip and scale tools

-
@sLaughterMed said:
Heres a thought. What about a set of 91mm scales with 2.5mm holes, specifically for using stock parts, and exposed rivets? Bonus points for optional pocket clip and scale tools
Oh to sell as a DIY build your own mod? Thats totally doable.
-
@sLaughterMed said:
Heres a thought. What about a set of 91mm scales with 2.5mm holes, specifically for using stock parts, and exposed rivets? Bonus points for optional pocket clip and scale tools
@Syph007 said:
Oh to sell as a DIY build your own mod? Thats totally doable.Sometimes it's embarrassing not to master enough English to fully understand.
You mean receiving scales, pivots and screws fitting for 91mm to self assemble the knife? I buy that today! I would mostly like to try various layouts with the tools I know I want. And learn more about the machinery inside :-)
-
I was wondering what about modding the tools for example put an awl into 84mm frame. Can you use the machine to cut out into the size or it needs to be done by hand?
Sent from my E6653 using Tapatalk
-
@Glofindel said:
I was wondering what about modding the tools for example put an awl into 84mm frame. Can you use the machine to cut out into the size or it needs to be done by hand?Sent from my E6653 using Tapatalk
I can cut hardened steels but it would really wear out the bits fast. I saw one maker who tried heat treating the knife blanks first then machining them to finish them up and while it worked I think it was not good in the long run. It is something I will try though. The first blades I make will be from the piece of damasteel I bought ages ago. Im going to make a fixture to hold the blanks at the proper angle then machine off a plane on each side to form the blade. Basically a full flat grind but machined off.
Heres a thought. What about a set of 91mm scales with 2.5mm holes, specifically for using stock parts, and exposed rivets? Bonus points for optional pocket clip and scale tools

@Syph007 said:
Oh to sell as a DIY build your own mod? Thats totally doable.Sometimes it's embarrassing not to master enough English to fully understand.
You mean receiving scales, pivots and screws fitting for 91mm to self assemble the knife? I buy that today! I would mostly like to try various layouts with the tools I know I want. And learn more about the machinery inside :-)
It would only work for the guys that want to rivet as all the internals need to be modified and pivots created of exact length. But I could sell a set of Ti scales and pin stock with it long enough to assemble up to a swiss champ size.
Im working today on getting the edge round over perfect. Ive milled the front and back faces no problem and the edges all the way around so the last part is the round over. Seemed simple to program but Im using a ball mill with 0.002 paths and somehow I keep getting a concave instead of convex, so Im doing somethign wrong. Thats the last operation I need to learn though before I can build pallets and run these in batches. Having it hands off means I can have the machine producing these while I go so other work.

-
I've seen most blade makers grind the profiles and bevels first. Then after heat treat they finish it up. I think this is the best method by far.
-
@tattoosteve99 said:
I've seen most blade makers grind the profiles and bevels first. Then after heat treat they finish it up. I think this is the best method by far.Grinding doesnt make a huge difference, you can grind hardened steel just fine expecially with modern ceramic belts. Some people have steel rectangles heat treated then grind them into blades. Its nice and simple that way as you dont have to grind them twice and you never get warps.
Im talking about producing a blade without using a grinder at all though. All machined. A grinder would only be needed to put an edge on at the very end. Machining hardened steels is much harder than grinding so I think Id have to do it in 2 stages. Or one stage and finished on a grinder. I found a canadian source for KMG grinders now so that is on my list.
-
I nailed the round over for the edges. :D Oh yep that is copper in the cross!


-
She's a beauty!
JR -
Wow! That looks awesome [emoji1303]
Sent from my electronic multi-tool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
