Leatherman PST chronology project
-
We got my Dad's PST from that catalog sometime in late '84 but unfortunately I lost it after he gave it to me. I don't remember anything unusual markings wise, which makes that blade marking all the more fascinating. I'm a huge PST/PST II fan, and love this thread!
-
Those advertising pics are great wowaboro
The PST is one of my all time favs and just a classic that even with a the few flaws it has can be carried still in this day and age and still be very helpful with day to day life 
-
@Poncho65 said:
Those advertising pics are great wowaboro
The PST is one of my all time favs and just a classic that even with a the few flaws it has can be carried still in this day and age and still be very helpful with day to day life 
Thanks, Poncho

I love PST - from him all multitool's history was started and now it's very interesting object for collecting.
But my EDC, for many years - Juice SC2
-
If you haven't checked the first page in a while there is an awesome PST chronology diagram created by Huntsman edited into the first post that can be used as a great reference in your PST hunting

-
@Poncho65 said:
If you haven't checked the first page in a while there is an awesome PST chronology diagram created by Huntsman edited into the first post that can be used as a great reference in your PST hunting
Thanks, Poncho, but I have my own PST working table

Just for sample, it's preview, unfinished and therefore so poorly visible ;) variant:
-
If you haven't checked the first page in a while there is an awesome PST chronology diagram created by Huntsman edited into the first post that can be used as a great reference in your PST hunting

Thanks, Poncho, but I have my own PST working table

Just for sample, it's preview, unfinished and therefore so poorly visible ;) variant:
Yes but you are a bit more into the variants than most

-
@Poncho65 said:
If you haven't checked the first page in a while there is an awesome PST chronology diagram created by Huntsman edited into the first post that can be used as a great reference in your PST hunting
Thanks for the plug Poncho
However I think my Chronology is the kindergarten/new starter's version
Wowbaro's is the PhD version
-
• Rivets or knurled screws?
knurled screws• ** Lanyard attachment? **
Yes• **(Old) small diameter or (new) large diameter plier pivot? **
Small• **LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL? **
Leatherman USA• ** A hard wire cutter notch? **
Yes (no indicator)• **Handles stamped with what? **
LEATHERMAN® TOOL PORTLAND OR• ** Inch ruler only, or inch/metric? **
Inch/metric• **Date codes? **
1000 on handle with blade
0900 on handle with file• ** Drop point knife blade or clip point? (saber?) **
Drop point• ** Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN? **
Leatherman USA on blade
Leatherman on file• **Screwdrivers: pivot-in or pivot-out? **
I don't know what this means.My Philips is not that square pivot side, like SOG makes. It's the other design. C on one side, 3 on the other.
This one:

Not this one:

So happy with this. Great condition, and loki's wrenches fit this.
So awesome! :D -
I think that this probably has knurled screws instead of rivets, correct? Other than that it probably has the newer clip point as well
and possibly the larger pivot, I am just goin by the datecodes of it mind you though ;)Still a PST is great to receive any day of the week

-
@Poncho65 said:
I think that this probably has knurled screws instead of rivets, correct? Other than that it probably has the newer clip point as well
and possibly the larger pivot, I am just goin by the datecodes of it mind you though ;)Still a PST is great to receive any day of the week

oops. yes, knurled screws. same size as charge/rebar. fit perfectly in loki's wrenches.
I'm pretty sure it has the small pivot plier, but I don't have another one to compare it to. Just a Sideclip, which has the exact same size pivot.
What does pivot-in and pivot-out drivers mean?
-
Hi RP
I had the same question myself when I started getting interested in PSTs
And I have seen the question in this thread a couple of times too – So here is what I think is the answer - See the photo below
– **Pivot in **on the left, on an old JPST - Pivot out on the right, on a 2004 PST II
Although if I am correct you have pretty much answered the question yourself above!!
:DAnd here is my theory as to why !!
The screwdriver tips have to be against the handles when folded way so that the plier head will fit. So the initial design was as seen on the left.
The problem with this design is that when you open the tool the centre of the driver is above the pivot slightly to the** inside** of the handles, so as you bear down on a screw the centre of the force will be on the inside of the pivot, which of course will make the driver want to fold.
So LM came up with this ingenious design where the driver is still against the handle when folded away. However when you fold it out the centre of the driver is above the outside of the pivot. So now when you drive down on a screw the centre of the force is on the outside of the pivot and this tends to force the driver to stay open.
**Brilliant **– Although surprising it took them 15 years to come up with this.
This design has been somewhat negated by locking tools – But you still see it on the Juice drivers, and just today I noticed that the Wave flat driver has a similar design, even though it is locking.
Note this is just my uneducated guess :o – I am sure an expert will be along soon !!

PS. And I just noticed that the PST II flat driver is a little bent - Sometimes easier to see things on a piccie - Better fix that!
-
Great pics, thanks!
Your theory sounds bulletproof, if it is not correct I'll be amazed. Makes perfect sense, and you explained it beautifully.
That pic should be in the OP, so people can see what pivot in/out means, maybe with other pics, showcasing the different variants of features?I should have gone through this thread before ordering my PST, but I was too damn impressed with it.
I am glad I ended up with the pivot out drivers. It's a beauty. Great condition, slim design, compact with the old sheath, loki's wrenches fit it perfectly. Disassembled it, cleaned it, put it back together. Great tool, sad to see it discontinued, like many others.I'll hunt down a mini, Pulse/ST 200, Blast, OG Wave, and of course a PST II, for discontinued tools. And maybe a JPST, if I get lucky.
-
Great pics and explanation Huntsman

Happy hunting RP

-
Just went back through a lot of this thread and it sure brought back a lot of memories for me

-
Recently aquired



Sent from my iPad using Tapatalk
-
Nice PST II Hugos :)
-
-
Thanks Gents, it came with a lot of play on the plier head, but LM replaced it with a new one, as well as a new blade. I then took it apart and cleaned it. Now one of my prized collection pieces, and Friday carry.
Sent from my iPad using Tapatalk
-
@hugos said:
Thanks Gents, it came with a lot of play on the plier head, but LM replaced it with a new one, as well as a new blade. I then took it apart and cleaned it. Now one of my prized collection pieces, and Friday carry.Sent from my iPad using Tapatalk
Glad they could sort it out for you
and that it's in your EDC rotation 
-
Just picked this bad boy up today...
• Rivets or knurled screws?
Knurled• Lanyard attachment?
Yes• (Old) small diameter or (new) large diameter plier pivot?
Small diameter• LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL?
LEATHERMAN USA• A hard wire cutter notch?
No• Handles stamped with what? (see pictures in next post for examples)
One side of first handle stamped: LEATHERMAN TOOL, PORTLAND OR REG’D TM 1325473. The reverse side of this handle is blank.
The other handle is blank.• Inch ruler only, or inch/metric?
Inch / Metric• Date codes?
0493 on one handel only (knife blade side)• Drop point knife blade or clip point? (saber?)
Saber• Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN?
LEATHERMAN USA• Screwdrivers: pivot-in or pivot-out?
This is a BO PST without cap crimper.
Pics to come shortly...
Cheers,
CB
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
