Leatherman PST chronology project
-
• Rivets or knurled screws?
knurled screws• ** Lanyard attachment? **
Yes• **(Old) small diameter or (new) large diameter plier pivot? **
Small• **LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL? **
Leatherman USA• ** A hard wire cutter notch? **
Yes (no indicator)• **Handles stamped with what? **
LEATHERMAN® TOOL PORTLAND OR• ** Inch ruler only, or inch/metric? **
Inch/metric• **Date codes? **
1000 on handle with blade
0900 on handle with file• ** Drop point knife blade or clip point? (saber?) **
Drop point• ** Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN? **
Leatherman USA on blade
Leatherman on file• **Screwdrivers: pivot-in or pivot-out? **
I don't know what this means.My Philips is not that square pivot side, like SOG makes. It's the other design. C on one side, 3 on the other.
This one:

Not this one:

So happy with this. Great condition, and loki's wrenches fit this.
So awesome! :D -
I think that this probably has knurled screws instead of rivets, correct? Other than that it probably has the newer clip point as well
and possibly the larger pivot, I am just goin by the datecodes of it mind you though ;)Still a PST is great to receive any day of the week

-
@Poncho65 said:
I think that this probably has knurled screws instead of rivets, correct? Other than that it probably has the newer clip point as well
and possibly the larger pivot, I am just goin by the datecodes of it mind you though ;)Still a PST is great to receive any day of the week

oops. yes, knurled screws. same size as charge/rebar. fit perfectly in loki's wrenches.
I'm pretty sure it has the small pivot plier, but I don't have another one to compare it to. Just a Sideclip, which has the exact same size pivot.
What does pivot-in and pivot-out drivers mean?
-
Hi RP
I had the same question myself when I started getting interested in PSTs
And I have seen the question in this thread a couple of times too – So here is what I think is the answer - See the photo below
– **Pivot in **on the left, on an old JPST - Pivot out on the right, on a 2004 PST II
Although if I am correct you have pretty much answered the question yourself above!!
:DAnd here is my theory as to why !!
The screwdriver tips have to be against the handles when folded way so that the plier head will fit. So the initial design was as seen on the left.
The problem with this design is that when you open the tool the centre of the driver is above the pivot slightly to the** inside** of the handles, so as you bear down on a screw the centre of the force will be on the inside of the pivot, which of course will make the driver want to fold.
So LM came up with this ingenious design where the driver is still against the handle when folded away. However when you fold it out the centre of the driver is above the outside of the pivot. So now when you drive down on a screw the centre of the force is on the outside of the pivot and this tends to force the driver to stay open.
**Brilliant **– Although surprising it took them 15 years to come up with this.
This design has been somewhat negated by locking tools – But you still see it on the Juice drivers, and just today I noticed that the Wave flat driver has a similar design, even though it is locking.
Note this is just my uneducated guess :o – I am sure an expert will be along soon !!

PS. And I just noticed that the PST II flat driver is a little bent - Sometimes easier to see things on a piccie - Better fix that!
-
Great pics, thanks!
Your theory sounds bulletproof, if it is not correct I'll be amazed. Makes perfect sense, and you explained it beautifully.
That pic should be in the OP, so people can see what pivot in/out means, maybe with other pics, showcasing the different variants of features?I should have gone through this thread before ordering my PST, but I was too damn impressed with it.
I am glad I ended up with the pivot out drivers. It's a beauty. Great condition, slim design, compact with the old sheath, loki's wrenches fit it perfectly. Disassembled it, cleaned it, put it back together. Great tool, sad to see it discontinued, like many others.I'll hunt down a mini, Pulse/ST 200, Blast, OG Wave, and of course a PST II, for discontinued tools. And maybe a JPST, if I get lucky.
-
Great pics and explanation Huntsman

Happy hunting RP

-
Just went back through a lot of this thread and it sure brought back a lot of memories for me

-
Recently aquired



Sent from my iPad using Tapatalk
-
Nice PST II Hugos :)
-
-
Thanks Gents, it came with a lot of play on the plier head, but LM replaced it with a new one, as well as a new blade. I then took it apart and cleaned it. Now one of my prized collection pieces, and Friday carry.
Sent from my iPad using Tapatalk
-
@hugos said:
Thanks Gents, it came with a lot of play on the plier head, but LM replaced it with a new one, as well as a new blade. I then took it apart and cleaned it. Now one of my prized collection pieces, and Friday carry.Sent from my iPad using Tapatalk
Glad they could sort it out for you
and that it's in your EDC rotation 
-
Just picked this bad boy up today...
• Rivets or knurled screws?
Knurled• Lanyard attachment?
Yes• (Old) small diameter or (new) large diameter plier pivot?
Small diameter• LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL?
LEATHERMAN USA• A hard wire cutter notch?
No• Handles stamped with what? (see pictures in next post for examples)
One side of first handle stamped: LEATHERMAN TOOL, PORTLAND OR REG’D TM 1325473. The reverse side of this handle is blank.
The other handle is blank.• Inch ruler only, or inch/metric?
Inch / Metric• Date codes?
0493 on one handel only (knife blade side)• Drop point knife blade or clip point? (saber?)
Saber• Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN?
LEATHERMAN USA• Screwdrivers: pivot-in or pivot-out?
This is a BO PST without cap crimper.
Pics to come shortly...
Cheers,
CB -
@Chinese Buffet said:
• Date codes?
0493 on one handle only (knife blade side)This is a BO PST without cap crimper.
I'm sure on 100% other (file) handle also has date code.
It's maybe bad visible, but it there is :)
You may try to wipe the internal surface of the handle.I had a SS PST which David has now
That only had a datecode in one handle and this one would be in the date range where they might have been a few non dated handles still left in the bin 
-
@Chinese Buffet said:
Photos as promised...





Tool is old but seems like it wasn't used much or at all.
@wowaboro: Do you think it is possible that the BO coating covered the date?
CB
It is possible that the BO coating is hiding the date code but they only started putting the dates on them a little while prior to this

A very nice example you have there 8)
-
@Poncho65 said:
I had a SS PST which David has now
That only had a datecode in one handle and this one would be in the date range where they might have been a few non dated handles still left in the bin 
I still have that one Poncho! In fact its in front of me at the moment the date code in the knife blade handle is 0393. I have another stainless one that is 1292 in knife blade handle and no date code in the other. Date codes were started in late 1192. It wouldnt be unusual to have handles with and without on the same tool from that time period. :)
-
@David said:
I have another stainless one that is 1292 in knife blade handle and no date code in the other. Date codes were started in late 1192. It wouldnt be unusual to have handles with and without on the same tool from that time period. :)Yes, factory produced "One handle date" PSTs may have 1192 or 1292 code only.
If some PST has other date code on one handle only, it's means that item was repaired etc. -
I have another stainless one that is 1292 in knife blade handle and no date code in the other. Date codes were started in late 1192. It wouldnt be unusual to have handles with and without on the same tool from that time period. :)
Yes, factory produced "One handle date" PSTs may have 1192 or 1292 code only.
If some PST has other date code on one handle only, it's means that item was repaired etc.Is that a fact from LM or a hypothesis of yours
they pick the parts from a big bin and I can guarantee that some of the handles without dates would have been in the bottom for a few to several months ;) If I remember correctly that PST was period correct with everything of an early 90's PST 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
