Let's see your sharpening stones/gear!
-
@ddogu said:
Here's the one I use. This is an old stone from my grandpa. When he died mom told me that this was a valuable and quality sharpening stone and I had to handle it with care, it is said to be fragile.I have used it with water and oil (when I was a kid I even tried milk lol), though I am still not sure which one performs better.
Great stone, great story and priceless family history!!!! Thank you for sharing it with us!!!

-
My gear
Bench stone and Oak box I made when I was in trade school. Leather from a old strop glued to the top. It has a dual sided oil stone that I use mainly for chisels but I've used it for knives in the past as well.
Some small stones and a diamond EZY lap that are great for touch ups.
Old strop I got at a garage sale years ago. I used part of it to put on top of my oilstone box.
I use the Lansky Turn box most of the time and it works really well as long as the edge isn't too far gone. I do have a couple of steels as well but didn't take any pics of those.
-
Bench stone and Oak box I made when I was in trade school. Leather from a old strop glued to the top. It has a dual sided oil stone that I use mainly for chisels but I've used it for knives in the past as well.
Some small stones and a diamond EZY lap that are great for touch ups.
Old strop I got at a garage sale years ago. I used part of it to put on top of my oilstone box.
I use the Lansky Turn box most of the time and it works really well as long as the edge isn't too far gone. I do have a couple of steels as well but didn't take any pics of those.
Great, well loved and well used gear Steve!!! Nice box too....are you a woodworker?
-
Robert, I'm a carpenter, painter, handyman whatever will pay the bills :D
-
I'm currently out travelling Europe for a month but realised I wanted sharp knives. Luckily I found this second hand steel for 2$ a short while before leaving. It was made by EKA in Sweden and really small as seen by comparing it with a Spartan. Just what suited my needs (it's not like I will have to do any reprofiling out anything).
-
@Fortytwo said:
I'm currently out travelling Europe for a month but realised I wanted sharp knives. Luckily I found this second hand steel for 2$ a short while before leaving. It was made by EKA in Sweden and really small as seen by comparing it with a Spartan. Just what suited my needs (it's not like I will have to do any reprofiling out anything).That's a great travel solution!!!!

-
I've got the usual, vic ceramic, lansky 4 rod turn box and a lansky puck (which I don't like).
The new one to me is this and I'm waiting to have a day free when I can set it up and learn how to use it properly.

Sent from my iPhone using Tapatalk
-
That's a nice one Smashie!!!! I could never do the guided ones, too impatient. I have a lansky puck as well for machetes and lawnmower blades.
-
Thanks. I'm going to give this its first outing on a tramontina machete and see what can be done
Sent from my iPhone using Tapatalk
-
I will, I've just got to pick up a stable base to put it on
Sent from my iPhone using Tapatalk
-
I have quite a few different ones that I use.
Lansky 3 stone kit with added S1000 Ultra fine stone.
Lansky 4 rod turn box.
DMT Aligner kit with the standard three stones (course, fine and x-fine stones) and added x-course stone.
Worksharp Field Sharpener.
and two sets of the Spyderco 701MF profile set as well as a Sharpmaker with stock med and fine rods.



-
I used to free hand on a three stone system. One of those 8” triangular blocks that sat in a base but I haven't used it in years.
The knives I use now won't sharpen much less re-profile with wet stones.
So I've switched to a KME diamond system, It works with smaller blades better than some of the more expensive systems.I have 140, 300, 600, 1500 grit diamonds, I made a couple strops to fit into it. I clamp it in the bench vice to use it.
Once I have the profile set and it's sharp, I just use the larger bench strop to maintain the edge and don't use the system much at all.
The funny thing or maybe it's the sad thing but I spent more on the KME system than my first D2 steel knife.

-
@sir_mike said:
I have quite a few different ones that I use.Lansky 3 stone kit with added S1000 Ultra fine stone.
Lansky 4 rod turn box.
DMT Aligner kit with the standard three stones (course, fine and x-fine stones) and added x-course stone.
Worksharp Field Sharpener.
and two sets of the Spyderco 701MF profile set as well as a Sharpmaker with stock med and fine rods.Hey Mike are the 701 MF about the same as using the triangle stones of the Sharpmaker free hand

-

Plus a few other DMT's.
-
I have quite a few different ones that I use.
Lansky 3 stone kit with added S1000 Ultra fine stone.
Lansky 4 rod turn box.
DMT Aligner kit with the standard three stones (course, fine and x-fine stones) and added x-course stone.
Worksharp Field Sharpener.
and two sets of the Spyderco 701MF profile set as well as a Sharpmaker with stock med and fine rods.Hey Mike are the 701 MF about the same as using the triangle stones of the Sharpmaker free hand

I would say they maybe similar but the 701's will lay flat and they are longer so to me they are easier to use.
-
@sir_mike said:
I have quite a few different ones that I use.Lansky 3 stone kit with added S1000 Ultra fine stone.
Lansky 4 rod turn box.
DMT Aligner kit with the standard three stones (course, fine and x-fine stones) and added x-course stone.
Worksharp Field Sharpener.
and two sets of the Spyderco 701MF profile set as well as a Sharpmaker with stock med and fine rods.Great gear Mike!!! Which one is your "go to first" when an edge needs work? Your fav?
-
@Dean51 said:
I used to free hand on a three stone system. One of those 8” triangular blocks that sat in a base but I haven't used it in years.The knives I use now won't sharpen much less re-profile with wet stones.
So I've switched to a KME diamond system, It works with smaller blades better than some of the more expensive systems.I have 140, 300, 600, 1500 grit diamonds, I made a couple strops to fit into it. I clamp it in the bench vice to use it.
Once I have the profile set and it's sharp, I just use the larger bench strop to maintain the edge and don't use the system much at all.
The funny thing or maybe it's the sad thing but I spent more on the KME system than my first D2 steel knife.
That's a very complete set!
Sounds like it works great!!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




