Cleaning your tools. Tips & tricks.
-
@Gohard said:
I do more or less the same. Use compressed air to blow out all sand, mud,grime and whatever is stuck in them. Then a wash and another blow. Might get a lube if available. 90% of my tools gets used and is not there for a dress rehearsal. I do look after them and not one of my tools that I bought new got a rust spot on them. If I cant blow them dry, I don't clean them. Only wipe. Water=rust.
Got a few tools that has got a few corrosion spots on them. But I got them in that condition.I carry them only in a leather sheath that protect them from corrosion. The leather will absorb any moisture up to a certain degree. Well thats my opinion.
As far as carrying in leather to prevent corrosion. In my option leather is not great to store or carry your tools if you want rust prevention. As you said yourself the leather absorbs moisture which means your tool is wrapped in a semi moist material constantly. This is less than ideal when you want to prevent rust. I'm not saying if you carry in leather you will for sure get rust as other factors come into play like your location and weather patterns as well as proximity to the ocean.
-
Yes I totally agree and it makes sense what you say.
BUT
Not so sure about the location. Reason is that I live at the coast and work everywhere in The region. (1000 to 2500km away)All kinds of weather patterns. I repair and sometimes wash big earthmoving machinery in all kinds of weather. Come rain or shine. Sometimes soaked to the bone. Sometimes On my back in muddy conditions. (Hate that).
And not even once have I removed my leatherman. Leather sheath saturated with water at times. But no rust on any tool. I've been carrying my new wave since 2012 at work. Prior to that was my trusty 300 and before that my OG wave that some smurfised person [emoji90][emoji90]took. And all leather sheath carried. But like I said. I don't clean it if I cant blow dry the tool.I've been carrying leatherman for over 20 years and had no rust or corrosion yet. Touch wood. Hope I didn't get jinxed. [emoji31]
Maybe because I work daily with oily and greasy equipment.☹️☹️☹️And the tools always got a oily dirty layer? Don't know. Or maybe I got the super dooper special stainless steel models. [emoji848][emoji848]Need to thank Tim for that.
Just joking. [emoji6]
-
@captain spaulding said:
I think I put together a cleaning guide in the past, but may be mistaken. It really depends on the tool and what kind of cleaning you want to do, but for the most part you can just use warm water and dawn dish soap on any knife, tool, or multitool. I have cleaned more knives than I care to remember just using those and a toothbrush.I do not want to write out a full guide right now so here is my "general" cleaning process.
-
Rinse tool under warm tap water. Open tools and work all tools under the water including pliers.
-
Put dish soap on a toothbrush like its toothpaste and just go to town scrubbing every inch of the tool. Get in the pivots, under the pivots, all around and moving parts and just everything in general.
-
Rinse well.
-
Repeat the wash.
-
Rinse again and rinse very well. Work every moving part under the running water or in a bowl of water.
-
Dry. This is probably the most important part in my opinion. I used to use a air compressor, but moved and cannot use it now. I dry with a paper towel very well and then used the canned air (dust-off) to blast air from inside all the pivot areas. Then either let dry outside (depending on the tool material) or let it air dry for a few days in my house.
-
Oil the pivots and your good to go.
Rust removal is a different story which I have experimented with a bunch and had great results.
The Captain Spaulding method is the way to go!!! +1
Sent from my iPhone using Tapatalk
-
-
Captain S,I'm interested in the rust removal tips you got. Can you share this with us please. Bought a few tools that got minor spots on them. Don't really want to disassemble everyone of them.
-
Thanks everyone for the personal experiences and in depth descriptions. As straight forward as it seems it's good to have a heads and has helped me (and others I'd assume).
look, works so well 
-
This is my method for used knives, tools, and multitools I get. Cleaning is a little less extreme.
If I can't get the blades open--hose the thing down in WD-40 and let it set about 4 hours at least.
Then, rust is removed with an SOS pad and WD-40 as a cutting fluid. Usually, the SOS pad is already well used and devoid of its soap.
The whole thing is scrubbed with extra strength dish detergent and warm water. I use Victorinox's care tip when the blades are grimy around the pivots--opening and shutting it repetitively in the soap and water.
Then, I dry it, oil it with baby oil and a small dropper I found in some of my stuff a while back. I wipe high carbon stainless and carbon steel blades with oil to prevent it rusting. Then, I either put it away or slip it in my pocket.
-
baahh, when mine gets dirty i just toss it in the garbage and buy a new one. ::) ::) ::)
I'm with Capt. on cleaning methods.
If something is super rusty i use a vinegar soak then start to work with the elbow grease.
-
Rust remover I use molasses. Works brilliantly.
-
I use the hosmurfer/soap method then brush and lubricate however have never had to clean a tool with a BO surface. Is the BO susceptible to any lubricants or cleaning fluids or is it ok to do the same to them as a stainless surface.
Thanks,
John.
-
OK I can't decipher hosmurfer ???
:D
-
Good thread guys
I admit I don't clean my tools as I should
Sometimes they get oiled though :D -
hosmurfer!

-
Hot water is correct. Don't know where the hosmurfer came from.
Anyway I am wondering if one needs to take special care with a BO finish.
Thanks. John
-
I dont. I clean it the same way as everything else.
-
New page banana man dance

-
@jcs0001 said:
Hot water is correct. Don't know where the hosmurfer came from.Anyway I am wondering if one needs to take special care with a BO finish.
Thanks. John
It's a naughty word filter John - basically it automatically replaces the "naughty" word with "smurf" - can be quite amusing sometimes.
Re cleaning the BO - I'd say that BO finishes vary a lot and some seem to be more robust than others! Warm / hot water shouldn't do any damage, but maybe lightly wipe rather than scrub with a toothbrush.
-
Dave
Between the forum "correcting" things and my ipad mini (when I use it) doing the same, it's a wonder that my messages make any sense at all :D
Thanks for the info on the BO finish. Will have to experiment in a "gentle" fashion.
John.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
