Victorinox Spartan Lite initial impressions
-
At least they had the decency to make the light shine from the <u>front</u> end of the piggy. :P
-
ok
@Nightshade said:
Supratentorial, how far from the electric panelboard was the light? Excellent and thorough review too.Thanks!
The entire compartment from the far edge of the second battery to the edge of the light (double ended arrow in photo) is about an inch and a half long. The cover for the light (asterisk in photo) is not designed to be removable but there doesn't appear to be a panel board. It appears to be a rather simple design. One of the LED wires makes constant contact with one battery ("1" in photo) and the other wire makes contact with the other battery ("2" in photo) when the switch is pushed or locked in the ON position. The switch moves a red lever downward, pushing the wire against the battery (see single ended arrows in photo).
I'm not sure but it looks like the LED might be replaced by straightening the wires and pushing the LED out of it's housing. I just bought it though so I'll want to wait for some of the new-knife-feeling to wear off before I start taking it apart.

-
@Nightshade said:
Supratentorial, how far from the electric panelboard was the light? Excellent and thorough review too.Did he mean how far away from the electrical circuit breaker box was the knife light? In that one picture at the beginning of the thread?
-
Damn nice job of editing that battery compartment picture though!

-
Thanks! :D
-
Looks like one of these to me.
-
Great review, you posted this on SOSAK as well didn't you?
I'm a SAK-aholic (30+ SAK's) but i'm fairly new to LEDs.
I recently scored a Spartan lite new(still sealed in its blister pack) on ebay for 9.99$
I wasn't expecting much with the LED but actually i'm quite pleased with it. Its become my nighttime in-house flashlight!
One thing though callling the Spartan lite a three layer sak is technically correct but also a bit of a misnomer. That added middle LED/Philips layers is the same thickness as the Scissors AND the saw layer put together! The Spartan Lite is almost exactly the same thickness as my 4 layer Huntsman. Other than that i love the Spartan lite.
Makes me want the Huntsman lite as well! lol.
:) -
@tholiver said:
Great review, you posted this on SOSAK as well didn't you?
I'm a SAK-aholic (30+ SAK's) but i'm fairly new to LEDs.
I recently scored a Spartan lite new(still sealed in its blister pack) on ebay for 9.99$
I wasn't expecting much with the LED but actually i'm quite pleased with it. Its become my nighttime in-house flashlight!
One thing though callling the Spartan lite a three layer sak is technically correct but also a bit of a misnomer. That added middle LED/Philips layers is the same thickness as the Scissors AND the saw layer put together! The Spartan Lite is almost exactly the same thickness as my 4 layer Huntsman. Other than that i love the Spartan lite.
Makes me want the Huntsman lite as well! lol.
:)Thanks!
You're right, the layer with the LED is a fatty.
Btw, I swapped the translucent covers for stayglow (sp?) covers. Since I primarily carry the Spartan lite when walking the dogs at night, the stayglow comes in handy.
-
I wish they sold the stayglo panels separately as i'd love to retrofit a lot of my SAK's with them!
I want to do a mod where the Led is paired with the magnifier instead of the philips. I'm pretty sure the led and magnifier can both fit in the same layer!
:) -
Personally I don't have any qualms with the strength of the light. I've heard of some few people that have complained that location,or maybe the design of the switch makes it easy for the light to accidentally get turned on riding in the pocket.I can't say I've run into that,has anybody had that problem?
Swap out the scales for some plus scales,and you have a potent little packge. -
Bison56,
I've had the light on my Voyager Lite turn on my pocket & be dead when I needed it. I usually carry it suspended in my pocket, & I find the switch has to be toward my body or it gets turned on when I bump into something.
Tom
-
I don't know if the switch could be redesigned to cut down on accidentally being turned on,I'd be delighted,as I'm sure some others would be.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login