Contender 1- BLACK UTILITY POCKET KNIFE BOX CUTTER BOTTLE OPENER SCREWDRIVER EDC
-
Agreed- a tool you can rely on is infinitely better than a tool that you can't rely on. If it doesn't work then it is a useless tool.
But, you shouldn't have to pay $75 for a box cutter or wrench. So, I do these experiments occasionally to see what is available in various price ranges to see what may be useful and/or worth raiding the couch cushions for a few dollars.
Def
-
I'd definitely buy a few of those if it holds the blade securely. That could be a handy little tool
-
This is a good design. I like my copy quite a lot.
-
That's good to know. There is a very good chance that this one is going to end up in the MOLLE bag I have in the Jeep as a FAK and emergency bag.
Def
-
I've already ordered myself a few of these off evil bay, for the price they will be handy to have. Only £2.67 each to the UK ($4.46 Canadian at today's exchage rate).
Plus I can get standard blades in 10 packs for them from work :D
-
Well I hope they aren't too bad then! :ahhh
Def
-
Yes, hopefully they at least manage to do that much well.
Def
-
All I can say, my copy is well made and useful. I haven't had any issues with it yet. For the price, these are a steal.
-
-
I picked up one of these a couple years back when they first hit the Pacific Rim vendors. My take: it's a cleverly designed piece of junk.
I like its size, its flatness, the multi functionality.
I dislike the blade holding/retention method. First, the blade lock is sort of a frame lock kind of implementation. Bending the tab on the bottle opener half of the body allows the blade to slide into position, and also be removed.
Problem one: the "frame lock" tab is tight, kind of fiddly, and small.
Problem two: this is very much a two hand opening (retracting/extending) knife. One has to open the "frame lock", and then manipulate the blade with the other hand into proper position. Either engage one of the notches on the top of the blade, or the end of the blade in the case of full retraction. There are no visual cues to know when this happens. There are tactile cues... sort of.
Leading to problem three: the "frame lock" not only keeps the blade from extending/retracting, it also keeps the blade in its very thin cavity. Releasing the "frame lock" just as easily allows the blade to move vertically as well as in and out. It can be hard to tell if the blade has come out of its track without good inspection. Leading to insecure blade retention.
Problem three, the blade cavity track is nothing more than a shallow channel machined in the bottle opener half of the handle. The blade edge floats around in there, riding against the steel side of the channel. For its whole length. A steel edge riding against steel leads to a pre-dulled edge before you ever even use it. Call me a stickler, but the reason to carry a razor blade knife is to have something that can be relied on to be pretty sharp, without a rolled edge.
It is a rather handsome looking widget, to be sure. It's simply two halves held together with three small phillips screws, all three heads stripped out during installing. Perhaps a cheap attempt at tamper proofing? ;)
So, yeah, no one hand opening, no easy two handed opening for that matter, edge killing design, make for a useless tool IMO.
-
Good points indeed. To be honest I haven't given a lot of thought to the actual operation of this tool as I was waiting for it to come in to see.
I will definitely make note of your post as it sounds like this could be potentially hazardous to fingers.
Def
-
Just in case you feel that $5 is an unfair price for this tool:
Def
-
@Grant Lamontagne said:
Just in case you feel that $5 is an unfair price for this tool:Def
That damascus utility blade will go nicely with my 1,000 thread count toilet paper.
-
Holy crap, how much? :o
-
-
:o

Yeah, 5 bucks is sounding a lot better. I think I found mine for 3 dollars last year off of eBay.
-
Contender 1 arrived today and I'm not sure what, if anything I was expecting, although a part of me thinks it's cool that Contender 1 arrived first. :D

The first thing I noticed was that it was much larger than I expected it to be. I expected it to be about half to two thirds of the size that it is, but as you can see it is somewhat larger than a 91mm SAK, which of course is what made me decide to take my own measurements. Out came the calipers and my results are as follows:




100mm long
26mm high
3mm thick
34 gramsNow that that is out of the way, Contender 1 came with three blades- one installed in the tool and two more in a plastic baggie, which is good, because when it comes to securing razor blades we all know the plastic baggie is near the top of safe handling and containment materials.


On the surface, this seems like it might be an ok tool- after all, it's just a razor blade holder with a bottle opener and screwdriver on the end. Well, I haven't actually used it yet, as I've just opened the package and took some pics, but I have to say that I am thoroughly unimpressed so far.

As mentioned above the razor blade is drawn over and then pressed against the screw on the corner that holds the two halves of the frame together. Not only does this dull the edge but it also chips it off, as you can see from the above photo- if a bit of rough handling in a bubble mailer can leave giant marks in the blade, what are the chances it will be in any shape to be used when it's been bounced around in a first aid kit or EDC bag?

The next issue with this tool is that you sort of have to pry the halves apart enough that you can lift the blade over the screw and out the opening so that it can be used. I have fairly small, almost ladylike hands, and this was not easy for me to accomplish, so those of you that have man sized hands are pretty well screwed, and you'll probably need a multitool with you to get the blade out.

Then, once you have the blade sticking out, the next bit of fun begins- the blade won't come out any further which is nice, but there's nothing but the most basic amount of friction to keep it from sliding back in. On the surface that sounds ok, but in reality that will probably get annoying in actual use, especially if it can't be then extended again easily.

I'm going to give this one some use and see what happens, but I have to say I am not expecting much from this tool. If this was the end of the Challenge and not the first look I'd have to say this one fails miserably, but there's still time for it to redeem itself. You never know, it might perform a lot better in actual use. I am hoping so, because this tool is remarkably disappointing at this point.

Def
-
Strange that there's no real retention of the blade, I would have thought that there would be a small pin slotting into the notches on the blade. Would be a simple solution.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
