Cap lifter on an Executive
-
My girlfriend's birthday is coming up and I plan on gifting her an Executive after giving it a scale swap. Problem is that it lacks the cap lifter. I've searched the Internet a bit and it seems like the orange peeler is the best place to add one.
Now, anyone can make a cap lifter (seems like it's otherwise impossible to find a tool without one) but how do one design a good cap lifter?
This is my plan right now but I'd be glad to have some input.
PS. What pin size does the 75mm series use? I'm considering changing the liners for brass and then I'd have to replace the pins.
-
Drink twist caps

-
I'm curious about this.
Money Clip SAK is 74mm...but it looks to me like the nail file on it is the same as 58mm...
Can 58mm tools fit the pins and springs of 74mm knives?
Could you use the cap lifter/screwdriver combo tool from a 58mm knife?

-
I'll just leave this link here

/topic/51220
-
Fit a Nite Ize Doohickey on the keyring. Adds a prybar (something the orange peeler isn't strong enough for, unlike the 84mm and above bottle opener), wrenches, and of course, a bottle opener.
-
Can't wait to see what projects that come of this thread


-
It's 2 mm pins on 74 mm. There's no problem to do new liners, they're not embossed.
-
Not sure of the changeover year, but early 74mms have 1.5mm pins.
The 2mm pins are easier to work with but if you want to add 58mm tools like the caplifter/phillips you'll need to drill the hole out to 2mm. I have some carbide drill bits that I bought on eBay. They work really well but are quite fragile to side loads and break easily if not used in a drill press. -
Yes, even with a drill press. The edge always have cracks, so we have to sharpen after each use and in this size it's not easy.
-
My girlfriend is away so I had to take my chance to work a bit on the tool. So after taking it apart (I really need some better <2 mm drill bits) I started with the least relevant

The tweezers. I felt like they should have a brass head to fit with the brass theme. I made the brass part from a V, meant to be attached to a wall or something.
My file made short work of the brass and I drilled holes to match where the plastic was originally. Then I used small pins (sold as posts for bead work) and some solder to keep them in place.@Michel M. said:
It's 2 mm pins on 74 mm. There's no problem to do new liners, they're not embossed.They are embossed though, not so much that I think it will prove a problem.



-
The next step was to get fix the cap lifter. I printed a picture of a Rambler to have a guide to work after and then I first did a test run on some scrap steel sheet before I did my own Executive (less important to get it right) and after that the to be gift Executive.
Making cap lifters is perfect because you really have a good reason to celebrate that you're finished by trying it out


-
What tools did you use to make the cuts for the bottle opener? Have any pics of the process?
-
@enki_ck said:
What tools did you use to make the cuts for the bottle opener? Have any pics of the process?No pictures of the process but I'll upload one now of the tools.
It's almost identical to neillcurries setup from the thread you linked. Parting disks, one single .4mm and a spindle with a stack of 3x.8mm. One for the grunt work and one for precision. And then a diamond cone to really get in behind the lip and to smoothen things out.
I plan on finish the tools with sand paper and then polish the parts I can get to with a small wheel.For the brass work I used a set off jewelers files and a bigger file, both from Bacho. The brass will also get a finishing sanding after it's finally adapted to the scales.

-
Was it August last time I worked on this project? I've been lazy I guess. But since we're coming up on Christmas and it's meant to be a Christmas gift I guess it's time to get started.
I have acquired the necessary materials. Brass sheet, brass rod, brass flat stock (for the spacer) and some Ebony.

I decided to start small with the spacer so I cut a small piece of the flat bar (plenty of extra to hold on to while working) and drilled a 2mm hole (no need to be exact, there will be plenty of shaping to do anyway).

Deburring, it would be awesome if I could use the Dremel for more of the work but since I live in a fairly small apartment I have to consider dust management carefully. I have considered building a removable glovebox/hood for my work surface but nothing has come of it as of yet.

Next I found myself a M2 machine screw from my tin of screws and a matching nut.


After placing the parts in my vice I can now use the original part as template.

Coarse cutting.

And coarse filing.

And needle file for the last work.

When the side is done it's time to go on to the next side, basically going through the same steps again.

And this is where I left of for today, it's going to take some time but hopefully that will pay of in result. There are quite a few pictures now so it would be nice if a Moderator would be so kind as to add a warning in the topic title for those with limited bandwidth.
-
Really great pics and close-up shots 42
I can't wait to see this project finished :o

-
Been doing some more work but before I continue and before I put up pictures, am I gonna hit myself for not reaming the holes? Right now I'm using standard drill bits and the holes have a faint but unmistakable triangular shape to them.
-
So, more pictures today, this is not a quick job the way I'm doing it. I would say that I have fairly good tools but I'm lacking in workspace.
First step was to attach the liners together so that I could shape them all at the same time and after that I did some coarse shaping with my Dremel (Proxxon). I so wish I had had a belt-sander for this, as it where it took ages and I had to work more or less inside my dustbin to catch most of the brass dust.


After this I did some deburring and then did some finer work with sandpaper, ending in something fairly smooth and of the right size.

The ebony I was planning on using had to go since the blade had wobbled all over the place when I cut it previously (on a table saw)

Instead this mystery wood had to do, I was planning on using it for a knife of my own but I can cut more from the ashtray that it came from. I marked out where the tweezers were going and started carving. The chisel is made from some unknown broken tool that my father had laying around. It's just a bit broader than the 3 mm that the T&T are.

After making a rough carving I sawed out the slot and then started the fitting. Don't worry, I sanded the piece so that those ugly scratches wouldn't show.


Here I held the liner to the scale to see how well the tweezers would fit. Not very well it seems so I marked where it stopped and did some carving on the inside there.

Now that's better!

Lastly I epoxied the scale to the liner.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

