Kick, Fuse, Blast & Core Owners group club.
-
@Oxford_Guy said:
I will be able to join this club soon (though not for a few weeks probably, as am ordering from overseas to the UK), as I've just managed to track down and buy a (new!) Leatherman Knifeless Fuse (good for UK knife laws, even more so than the Knifeless Rebar, as no locking awl nor saw, and I don't like the tool clumping on the Rebar)... Will post photos when it arrives! Will be my first proper multitool (not counting SAKs).Hi - I've now received my (new!) Knifeless Fuse, am happy with the toolset (and lack of blade), non-clumping of tools (unlike the Knifeless Rebar), relatively small size/ light weight (170g/6 Oz) and comfort, BUT was very disappointed to find that the needle nose pliers don't seem to meet at properly, only at the very tip. even when I squeeze the handles. See the photos below - is this normal? As as far as I can tell from the other pics in this thread, this isn't the case for other people's Kick/Fuse/Blast/Core and seems quite bad considering the pliers are the primary function of the tool.


I think the place I managed to order it from still as some other Knifeless Fuses in stock, should I request a replacement? It's a bit of a pain, though, as I had to order from the US (I'm in the UK), so had to pay quite a bit for shipping and a little for VAT/customs... Almost wish I'd bought a Knifeless Rebar now (as could have bought that in the UK), but hate the tool clumping and have concerns about the locking awl and saw for UK knife laws.

-
It's pretty normal for the pliers not to touch except at the tip but your gap does look a little bigger than on any of my Fuses (and others using the same plier heads).
It looks like there could be a slight burr on one of the tips maybe?
I doubt it will affect performance much judging by your picture, but maybe its worth seeing if the burr could be filed off?
-
@DaveK said:
It's pretty normal for the pliers not to touch except at the tip but your gap does look a little bigger than on any of my Fuses (and others using the same plier heads).It looks like there could be a slight burr on one of the tips maybe?
I doubt it will affect performance much judging by your picture, but maybe its worth seeing if the burr could be filed off?
The tips do seem to have a little more metal sticking out than elsewhere, but looks like they're meant to, doesn't look like a burr, also it seems that the actual closing angle is off - the gap is much larger towards the tool body than near the tool tip, shouldn't this angle be more flat?
-
No - they shouldn't be parallel - there should be a slight angle (getting narrower towards the tip).
From your pic, it looks almost as though there's something between the tips if you see what I mean. Almost like the pliers are holding something!
-
@DaveK said:
No - they shouldn't be parallel - there should be a slight angle (getting narrower towards the tip).From your pic, it looks almost as though there's something between the tips if you see what I mean. Almost like the pliers are holding something!
I'll see if later I can show a close-up photo of the end of the open tips, though the macro isn't the best on my camera
-
No - they shouldn't be parallel - there should be a slight angle (getting narrower towards the tip).
From your pic, it looks almost as though there's something between the tips if you see what I mean. Almost like the pliers are holding something!
I'll see if later I can show a close-up photo of the end of the open tips, though the macro isn't the best on my camera
This is about the best I can do - with flash and without:

The tip of the right hand side is perhaps sticking out a little too much?:


-
Ooh - they look fine don't they?
I expected to see some sort of excess or burr on one of the tips

-
In all honesty, if it were me, I'd probably just use it, but I guess it depends on whether you think you might need to grip something finer than the gap.... I might also take a file to the tips and see if resolves the problem.
I'd equally understand why someone might return it!
-
Ooh - they look fine don't they?
I expected to see some sort of excess or burr on one of the tips

So should I consider trying to get a replacement?
I'm with Dave on this one

-
@DaveK said:
In all honesty, if it were me, I'd probably just use it, but I guess it depends on whether you think you might need to grip something finer than the gap.... I might also take a file to the tips and see if resolves the problem.I'd equally understand why someone might return it!
I'm just really surprised that Leatherman's QA let this one through, it's the sort of thing I might expect from something made in China, but not from the USA.
Also compare the gap on my Fuse to the picture @Humppa's Blast earlier in this thread, this was more what I was expecting:

If I'd got it from a UK supplier I wouldn't think twice about asking for a refund, it's just that it's going to be a pain to have to send it back to the USA and they might not even honour offering me a replacement - I might just email them and see what they say...
-
@Oxford_Guy said:
I'm just really surprised that Leatherman's QA let this one through, it's the sort of thing I might expect from something made in China, but not from the USA.It's rare, but it can happen. If it was a current production tool you'd bought in the UK I'd probably return it too for what it's worth.
Keeping just might be the more pragmatic choice given where you're at! Definitely worth contacting the supplier though I'd say - see if they offer to sweeten the deal a bit.
Whatever you do - I hope it resolves satisfactorily. I feel sort of responsible having recommended an obsolete tool to you :(
-
Hey Oxford I tried to send you a PM. Just wondering where you got the Knifeless Fuse?
-
I'm just really surprised that Leatherman's QA let this one through, it's the sort of thing I might expect from something made in China, but not from the USA.
It's rare, but it can happen. If it was a current production tool you'd bought in the UK I'd probably return it too for what it's worth.
Keeping just might be the more pragmatic choice given where you're at! Definitely worth contacting the supplier though I'd say - see if they offer to sweeten the deal a bit.
Whatever you do - I hope it resolves satisfactorily. I feel sort of responsible having recommended an obsolete tool to you :(
I emailed the store last night, will see if they reply when the USA wakes up today...
-
-
I might also take a file to the tips and see if resolves the problem.

Guess where the only small metal file I currently own is located? :P
-
@captain spaulding said:
Hey Oxford I tried to send you a PM. Just wondering where you got the Knifeless Fuse?
I've sent you a PM
Got it. Thanks!
-
@Oxford_Guy said:
Guess where the only small metal file I currently own is located? :PHa! This is why one multitool is never enough :P
-
Guess where the only small metal file I currently own is located? :P
Ha! This is why one multitool is never enough :P
That is so true :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login