Kick, Fuse, Blast & Core Owners group club.
-
@DaveK said:
No - they shouldn't be parallel - there should be a slight angle (getting narrower towards the tip).From your pic, it looks almost as though there's something between the tips if you see what I mean. Almost like the pliers are holding something!
I'll see if later I can show a close-up photo of the end of the open tips, though the macro isn't the best on my camera
-
No - they shouldn't be parallel - there should be a slight angle (getting narrower towards the tip).
From your pic, it looks almost as though there's something between the tips if you see what I mean. Almost like the pliers are holding something!
I'll see if later I can show a close-up photo of the end of the open tips, though the macro isn't the best on my camera
This is about the best I can do - with flash and without:

The tip of the right hand side is perhaps sticking out a little too much?:


-
Ooh - they look fine don't they?
I expected to see some sort of excess or burr on one of the tips

-
In all honesty, if it were me, I'd probably just use it, but I guess it depends on whether you think you might need to grip something finer than the gap.... I might also take a file to the tips and see if resolves the problem.
I'd equally understand why someone might return it!
-
Ooh - they look fine don't they?
I expected to see some sort of excess or burr on one of the tips

So should I consider trying to get a replacement?
I'm with Dave on this one

-
@DaveK said:
In all honesty, if it were me, I'd probably just use it, but I guess it depends on whether you think you might need to grip something finer than the gap.... I might also take a file to the tips and see if resolves the problem.I'd equally understand why someone might return it!
I'm just really surprised that Leatherman's QA let this one through, it's the sort of thing I might expect from something made in China, but not from the USA.
Also compare the gap on my Fuse to the picture @Humppa's Blast earlier in this thread, this was more what I was expecting:

If I'd got it from a UK supplier I wouldn't think twice about asking for a refund, it's just that it's going to be a pain to have to send it back to the USA and they might not even honour offering me a replacement - I might just email them and see what they say...
-
@Oxford_Guy said:
I'm just really surprised that Leatherman's QA let this one through, it's the sort of thing I might expect from something made in China, but not from the USA.It's rare, but it can happen. If it was a current production tool you'd bought in the UK I'd probably return it too for what it's worth.
Keeping just might be the more pragmatic choice given where you're at! Definitely worth contacting the supplier though I'd say - see if they offer to sweeten the deal a bit.
Whatever you do - I hope it resolves satisfactorily. I feel sort of responsible having recommended an obsolete tool to you :(
-
Hey Oxford I tried to send you a PM. Just wondering where you got the Knifeless Fuse?
-
I'm just really surprised that Leatherman's QA let this one through, it's the sort of thing I might expect from something made in China, but not from the USA.
It's rare, but it can happen. If it was a current production tool you'd bought in the UK I'd probably return it too for what it's worth.
Keeping just might be the more pragmatic choice given where you're at! Definitely worth contacting the supplier though I'd say - see if they offer to sweeten the deal a bit.
Whatever you do - I hope it resolves satisfactorily. I feel sort of responsible having recommended an obsolete tool to you :(
I emailed the store last night, will see if they reply when the USA wakes up today...
-
-
I might also take a file to the tips and see if resolves the problem.

Guess where the only small metal file I currently own is located? :P
-
@captain spaulding said:
Hey Oxford I tried to send you a PM. Just wondering where you got the Knifeless Fuse?
I've sent you a PM
Got it. Thanks!
-
@Oxford_Guy said:
Guess where the only small metal file I currently own is located? :PHa! This is why one multitool is never enough :P
-
Guess where the only small metal file I currently own is located? :P
Ha! This is why one multitool is never enough :P
That is so true :D
-
The more the merrier I say. ;)
-
I'm just really surprised that Leatherman's QA let this one through, it's the sort of thing I might expect from something made in China, but not from the USA.
It's rare, but it can happen. If it was a current production tool you'd bought in the UK I'd probably return it too for what it's worth.
Keeping just might be the more pragmatic choice given where you're at! Definitely worth contacting the supplier though I'd say - see if they offer to sweeten the deal a bit.
Whatever you do - I hope it resolves satisfactorily. I feel sort of responsible having recommended an obsolete tool to you :(
I emailed the store last night, will see if they reply when the USA wakes up today...
BTW this is the reply I received from the store (I also sent them a photo of Humppa's Blast for comparison, hence them mentioning this):
"I am sorry for your disappointment for what you perceive to be a Leatherman QC issue, however, if you view the attached you will see another Knifeless Fuse that we have in stock. I looked at a half dozen or so and they all look like the one pictured, i.e. they only touch at the tip when the jaw is closed. I also looked at the other forty + Leatherman multitools on display in our store and all of the pliers only meet at the tip. Based on these observations, I would say that this is their QC standard and typical, whereas your Blast jaw is an anomaly that we rarely see, but all within Leatherman’s QC specifications.
If you want me to look at every Knifeless Fuse that we have remaining in inventory to see if there is one that matches your Blast jaws, i.e. jaws that meet flush and parallel when closed, I can do that for you and send you a photo if I find an anomalous example. If you want to exchange it for the one we sent you that will be fine, however, you must pay return shipping and shipping back for the exchanged model, as the item we sent you is not defective."
-
Lol - OK, we know where they stand on the issue then!
Looking again at your pic, I'm sure I'd just use it tbh, but you could always send a picture to Leatherman and see what they say?
-
I have a few, and yours looks to be quite ok in the pliers dept.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login