Been doing some work in the Wiki
-
Probably the reason for it. Yeah, I'm an admin there so have a few more permissions available. I'm not sure if anyone even uses the WYSIWYG editor. I'll talk to Whoey to have it disabled if he can, so as to only have the wiki editor available.
-
@Huntsman said:
Hey Little Tinker (nice name BTW!!),
Welcome to the forum and thanks for the offer of helpThanks for the welcome. The name has multiple meanings of course, happens to reflect parts of my character (as a friend noted "If it ain't broke we can still fix it" :D), and my erstwhile vintage Tinker Small is one of my favourite SAKs ;). My first planned mod is also Tinker related ;)...
@Huntsman said:
That can opener list is amazing - And funny - I guess the result of multiple authors over a long time, and a tool with several functions- As you may know - for these items there is a hyperlink underneath and some display text which the author can edit
For those in the know, I guess it is pretty obvious what the tool is - But for someone unfamiliar - these sorts of inconsistencies are confusing - It sounds like a lot of work to clean up - Is there a clever automated way to do that? or is it just grunt.
The tool to knife and knife to tool links would be great too.
Detron on this forum created a spreadsheet like that and as you say there is the Selector..
I am just a novice editor (as you can tell) - But maybe enki or one of the other Wiki-meisters will be along soon!!

I'm intending that a lot of the edits should be automated, otherwise my enthusiasm could be dented. I'm not expecting that to be too hard, but we'll see...
On reflection although those various rendition of the same information got a bit in the way of me digesting all the tool layer info into Excel (because I had to flatten them out) it won't be such a practical problem once I can see the raw Wiki source, so probably best to focus on new additions than tidying up perfectly usable current info. My current ideas are:
- Knife page (eg Tinker Small
Leave for now, except maybe rejig thinks like key-ring to be a consistent scale or layer tool. I need to be strong on this :P... - Tool page (eg Phillips Screwdriver Back Tool: Provide link to knives that have the tool, with indication of how many layers that knife has to give you a sense of whether it's likely to be what you're after.
- Size / layer pages (eg Victorinox 91mm 3 layer
Expand table to have a column for each differentiating layer / back tool (probably not scale tools - too much noise)
And of course use similar info to refresh the Selector and give dynamic lookup / search as well as simple perusal of that static info.
You could be right :o...
- As you may know - for these items there is a hyperlink underneath and some display text which the author can edit
-
I registered on SAKWiki, so just need editing rights set up to start trialling some of the above.
-
-
To get track of my own edits:
Lately I totally revamped the Wenger Nature Series page (that I think still needs to be ironed out by someone else)
Which implied also updating the Wenger V.I.P related section.Though most of the edits I done were to correct typo or add infos or a picture here and there like Updating Alox color-palette, Adding Huntsman 3.3713 variation (Ecoline Nylon scales), ...
Is there a page dedicated to scale materials?* Or maybe the color-palette could do that too*
That's the first thing we see about a SAK (even more if you don't have it in hand)
-
@Little Tinker said:
My current ideas are:- Tool page (eg Phillips Screwdriver Back Tool: Provide link to knives that have the tool, with indication of how many layers that knife has to give you a sense of whether it's likely to be what you're after.
- Size / layer pages (eg Victorinox 91mm 3 layer
Expand table to have a column for each differentiating layer / back tool (probably not scale tools - too much noise)
Early examples of the above can be seen at:
-
Pliers tool page: I think this looks OK, but maybe a better table title than "Related Knives". And positioning, taking into consideration that there could also be a Wenger table.
-
Victorinox 91mm 3 layer: Default table magic looking too big in narrow-ish browser window, and will be worse on knives with more layers and / or when back tools are included. Maybe break table into "Common" tools and "SpeSmurfpillst"? I left out Scale Tools for a similar reason. Do they warrant a table? Will start to make page big though... Also thinking of switching "Y" to "L" or "B" to indicate Layer or Back tool location.
BTW, there a couple of gremlins where I parsed the current Wiki data and keyring is listed as a layer tool on just a couple of knives (I think of it as a scale tool), CyberTool and Champion pages have multiple tool config lists, etc. They'l get fixed as the underlying data is nudged into shape.
-
-
I'm thinking of using TikiWiki's PluginInclude capability to build a pair of master page of all the new tables and then pull in the right table for each tool or knife.
Has that been tried elsewhere in the Wiki with success or failure?
-
@Huntsman said:
As I suspected - or hoped!! (I did not think I was that blind or dumb) - we must have different authorisations - As no little pencil for me
Here is what my editor screen looks like..
I landed in the WYSIWYG editor when creating a page ??? :-[. No icons to get out for me either :ahhh, but in the TikiWiki documentation I discovered that adding "&wysiwyg=n" to the edit URL takes you into the 'pure' Wiki code
. -
-
cool

Time to give Whoey a reminder again. >:D He's busy with some real world stuff
-
was out of town actually, but WYSIWYG editor is disabled now.
-
-
@Little Tinker said:
I'm thinking of using TikiWiki's PluginInclude capability to build a pair of master page of all the new tables and then pull in the right table for each tool or knife.Has that been tried elsewhere in the Wiki with success or failure?
I've now used that approach to add a knife-tool matrix to each of the Victorinox 91mm 1/2/3/4/5/6+ Layer Model pages. I'll add them to the 84mm model pages when time permits. The INCLUDE line on each of those pages takes the relevant snippet from this 'master' page, which can be quickly regenerated from the core database behind the data I downloaded / parsed, which in turn I ought to be able to be able to maintain by re-downloading the knife data as it is updated.
I think a bit of work to ensure the tables don't get too wide could still be useful. I'm unsure whether the Core and Other tool tables on (say) 5-layer page works as well as intended. Plus its always hard to pre-guess what everyone else is seeing and whether it is legible or not. I don't have a web authoring test suite to use...
A future edit would be to remove the original table, but that would take out the (sparse?) width and weight info as well as the corkscrew / Phillips in the 'lite' matrix. Should that be kept in the new matrices?
Thoughts and inputs welcomed.
-
You know, we need editors for the Multitool Encyclopedia too

What kind of work is needed, exactly?
Mostly we need new articles written, and proofreading of current articles. There is a link to the "How To" page for the wiki in my signature, and if you want to make edits and make new pages, I can send you the passcode needed to register.
Amusingly enough, the MTwiki actually benefited from being neglected for so long, and even with a very small group of editors, cleaning up the old code was quick and painless. The SAKwiki is still being cleaned up, despite having much more enthusiasm and support.
-
Hi Little Tinker
Well you have certainly been doing some BIG Tinkering.
The tool matrices are a great idea - although the 5 layer page seems to show the 3 layer models - Maybe this is still WIP??
I like the updated front back designation .....
One slight bug/issue - The tool table when I see it overlaps the brand, layer, size keys/links down the right hand side of the page.....Edit - I also love the Related Knives section in the Tools pages
I have a couple of suggestions on the tables.
- To save width how about bringing in a two or three letter code for each of the tools - You know the sort of thing: MB, SB, CO, SD, A, CS, KR for instance for a Spartan - We could store the key somewhere in a link or even put it on each page, or update the tool page with the abbreviations ??
- Again to save width, and given that just about every SAK has the Spartan tool set - How about missing out those tools from the table and just putting a note where there is a variation (eg for Compacts)? - So there would be one column for the Spartan toolset - And that column would be blank for all knives that contained the Spartan tool set - Then there would be a note number in that column - For instance Note 1 for a Automobile would say the Spartan small blade is replaced by the Technicians screwdriver - Not sure how well that would work - Might get a bit messy ....... ???
- I see you put all the tools in alphabetical order - But how about a more SAK centric logical order with the most common tools starting with the Spartan toolset first (assuming we don't remove this!
as per suggestion 2) and listing all the tools in the Swisschamp next - Then the less common tools - So the order would be something like:
MB, SB, CO, SD, A, CS, KR, Tp, Tw, Sc, WS, MF, FS, Ph, MG, Pl - followed by all the more unusual tools grouping similar tool together eg PB, MB(S), MB(PS), EB etc etc ??? ???
Edit - It all seems like a lot of work for you - although I get the impression you are pretty good at this type of stuff - So hopefully can make it a bit easier
Anyway -** respect and thanks **

And I have been doing my own Tinkering - So here is a summary:
-
Reworded the Spartan introductory paragraph
-
Re structured the Champion tool section - to clearly show similarities and differences between the 6 and 7 layer versions
-
Updated the history of the Champion Plus
-
Added some references to the 111mm 2 layer models back to the 91mm models
-
Looking great so far.

Huntsman covered all I wanted to say as far as the work done so far. Let me know if you encounter any permission problems with the wiki.
-
Been away for ages, just wanted to say hi to everybody and to thank those keeping up the good work with the wiki!
As far as Wenger is related, I remember I had a lot of plans to add small edits and few knives (mostly from the "Wenger love" thread).
Will try to find material of what I was planning to do and pass it to the new super-editors! -
@Huntsman said:
I have a couple of suggestions on the tables.
<SNIP>Thanks, all good ideas. It would be awkward to adjust the current approach to do the Spartan plus / minus thing, but I have thought of similar. Did you notice the "Tools common to all knives" section that tries to do a similar thing of shrinking down the horizontal width by excluding those tools from the table?
I've put a vertical-text label in, which is somewhat hard to read but does a lot (IMHO) to keep the data more legible overall. Comments welcome.
I agree on sorting the columns from most to least 'used', and think the Spartan -> Champ -> Other arrangement is good. I'll do that next, with a twist of tweak it a bit to keep all the blades together so it is easy to see what is in place of a standard blade.
-
Wow - Totally** awesome** work Little Tinker - Thank you
The new look tables are just fab

(And you sorted out the overlap with the index, and I think you got all the layers down to one table - Yay)The vertical text looks a little weird to start with - But is readable and works perfectly once you get used to it - And better than abbreviations IMHO - as it avoids all confusion and a cross reference
The common tools to all knives is great and works really well - Better approach than my suggestion - One minor comment - I would put all those tools in a horizontal line - Just to save scrolling/space
One comment on the 6+ layer page - The Cyber tools are missing and also the a/b and c versions of the Champion - The a/bs are six layer and have corkscrew/Phillips respectively and the c is seven layer - Maybe this is just WIP
EDIT2: Re the Spartan/common/Champ grouping of the tools - As well as all that it would be good to group by layer then back then scale tools too. I have a spready that does this let me know if you want me to send it to you for a quick gander
EDIT: Oh man I just looked at the source tiki for your new layer tables - Not simple
- I hope you automated the creation of those somehow - And switching the columns around will be a nightmare??
Even more respect and awe !!
Although making the common tools into one line is easy!!And I guess once these tables are done they are done - And unlikely to need much maintenance
- Maybe just the odd new SAK every now and then - Although I don't think that has happened in the Vic line up for over a decade, possibly not since the Cyber tools in 2000 - with the exception of the Pioneer X and the Delemonts -
They seem to be more prone to reducing, rather than expanding, their SAK product line these days!!
Although there was that comment/hint from Charles Elsener (I think it was on Facebook) about big changes next year
Watch this space
H - Maybe just the odd new SAK every now and then - Although I don't think that has happened in the Vic line up for over a decade, possibly not since the Cyber tools in 2000 - with the exception of the Pioneer X and the Delemonts -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:-[
