Show off your Sak mod's!
-
@Psych said:
This is my first mod. Just finished it today. It's not cosmetically perfect, but works well and I imagine that it the imperfections will be less noticeable as it develops pocket wear.

Sent from my iPhone using Tapatalk
Very nice mod... Been wanting to do a similar mod such as this... Ideal for my urban edc needs as it has very similar tool configuration to my favourite Yeoman...

Sent from my iPhone using Tapatalk
-
@Psych said:
I used old scissors from an explorer I disassembled a while back with a new pioneer x spring. I really don't like the pioneer x scissors because of the nail nick placement. It required me to bend the new spring a bit to get a good snap, but works great.That's interesting. I did the same with 91mm scissors and a Pioneer X spring, but on mine I didn't have to do anything to the spring.
-
I used old scissors from an explorer I disassembled a while back with a new pioneer x spring. I really don't like the pioneer x scissors because of the nail nick placement. It required me to bend the new spring a bit to get a good snap, but works great.
That's interesting. I did the same with 91mm scissors and a Pioneer X spring, but on mine I didn't have to do anything to the spring.
Yeah, I was surprised I needed to bend it a bit, but the scissors I used weren't from a recent 91mm. They were from an explorer I had that was at least 10 years old. I'm not sure if that had anything to do with it. I got a good snap on opening them, but they wouldn't snap on closing until I bent the spring a bit.
Sent from my iPhone using Tapatalk
-
@tattoosteve99 said:
I'm past due for pics so here's a bunch.Really diggin the Compact Explorer/Yeoman whatever. Do you find that these hook nail files wear out from being exposed? I got a used Compact with the file surface on hook and it works...kinda, but it's no where near as "cutting" as the Sportsman type nail file.
I thought maybe having it on the "outside" of the knife meant it's gonna get rubbed against surfaces and eventually lose its "grit". Man that is a great build. Has me thinking of doing a Compact LED Lite/Phillips. Great travels SAK.
Screwdriver PLUS bottle of wine afterwards.What blade is it I see there in the one with the bit driver? Looks like a 93mm Alox thickness blade.
Pretty ones all.
-
I'm past due for pics so here's a bunch.
Really diggin the Compact Explorer/Yeoman whatever. Do you find that these hook nail files wear out from being exposed? I got a used Compact with the file surface on hook and it works...kinda, but it's no where near as "cutting" as the Sportsman type nail file.
I thought maybe having it on the "outside" of the knife meant it's gonna get rubbed against surfaces and eventually lose its "grit". Man that is a great build. Has me thinking of doing a Compact LED Lite/Phillips. Great travels SAK.
Screwdriver PLUS bottle of wine afterwards.What blade is it I see there in the one with the bit driver? Looks like a 93mm Alox thickness blade.
Pretty ones all.
No idea on the nail file as that's for a customer.
It's a regular sized blade in. Maybe just the angle. I can substitute the awl for the hook for people who prefer it ;) -
Added another couple of layers to this one.


Sent from my iPhone using Tapatalk
-
Recently finished this one... Just slimmed down a Swisschamp and took out the wood saw and fish scaler... Also replaced the chisel for a fine screw driver and rearranged the layers. Now I have a multi tool dedicated for SAK modding... Think I'll just call it The Modder (for lack of a better name) [emoji23][emoji23][emoji23]


No sooner after The Modder was completed, it was called into service. Assisting on another build by removing scales, pulling out bushings and filing flat pins pre-peening and filing out excess pins before putting on new scales.
Thanks to The Modder, I now have another Yeoman for EDC...

Sent from my iPhone using Tapatalk
-
@jaya_man said:
Recently finished this one... Just slimmed down a Swisschamp and took out the wood saw and fish scaler... Also replaced the chisel for a fine screw driver and rearranged the layers. Now I have a multi tool dedicated for SAK modding... Think I'll just call it The Modder (for lack of a better name) [emoji23][emoji23][emoji23]

No sooner after The Modder was completed, it was called into service. Assisting on another build by removing scales, pulling out bushings and filing flat pins pre-peening and filing out excess pins before putting on new scales.
Thanks to The Modder, I now have another Yeoman for EDC...

Sent from my iPhone using Tapatalk
Very cool!
-
Recently finished this one... Just slimmed down a Swisschamp and took out the wood saw and fish scaler... Also replaced the chisel for a fine screw driver and rearranged the layers. Now I have a multi tool dedicated for SAK modding... Think I'll just call it The Modder (for lack of a better name) [emoji23][emoji23][emoji23]


No sooner after The Modder was completed, it was called into service. Assisting on another build by removing scales, pulling out bushings and filing flat pins pre-peening and filing out excess pins before putting on new scales.
Thanks to The Modder, I now have another Yeoman for EDC...

Sent from my iPhone using Tapatalk
Very cool!
Thanks Windson

Sent from my iPhone using Tapatalk
-
Good stuff jaya

-
-
@jaya_man said:
Recently finished this one... Just slimmed down a Swisschamp and took out the wood saw and fish scaler... Also replaced the chisel for a fine screw driver and rearranged the layers. Now I have a multi tool dedicated for SAK modding... Think I'll just call it The Modder (for lack of a better name) [emoji23][emoji23][emoji23]

No sooner after The Modder was completed, it was called into service. Assisting on another build by removing scales, pulling out bushings and filing flat pins pre-peening and filing out excess pins before putting on new scales.
Thanks to The Modder, I now have another Yeoman for EDC...

Sent from my iPhone using Tapatalk
Nice toolset, jaya_man.
Same layout as one of my early mods:

I call mine the Deluxe Modeler. -
-
Recently finished this one... Just slimmed down a Swisschamp and took out the wood saw and fish scaler... Also replaced the chisel for a fine screw driver and rearranged the layers. Now I have a multi tool dedicated for SAK modding... Think I'll just call it The Modder (for lack of a better name) [emoji23][emoji23][emoji23]


No sooner after The Modder was completed, it was called into service. Assisting on another build by removing scales, pulling out bushings and filing flat pins pre-peening and filing out excess pins before putting on new scales.
Thanks to The Modder, I now have another Yeoman for EDC...

Sent from my iPhone using Tapatalk
Nice toolset, jaya_man.
Same layout as one of my early mods:

I call mine the Deluxe Modeler.Ahhh... That's a nice one

Sent from my iPhone using Tapatalk
-
Great stuff jaya! I love the Yeoman

-
-
Has anybody tried doing a bladeless 91mm SAK? Would it be possible to retain the corkscrew or back layer phillips?
Tried fitting one on a scissors layer replacing the hook. Unfortunately there is no backspring tension.
Sent from my iPhone using Tapatalk
-
@jaya_man said:
Now I have a multi tool dedicated for SAK modding... Think I'll just call it The ModderA SAK SAK! That's cool.
I use an old Wenger with scratched blade to remove scales. Thinking about sharpening the awl so I can mark the center of pins for drilling. Doesn't have metal file though. I forget the name of that watch makers knife, watckmakerhöffer or something, seems like it would be useful for working on saks. But expensive.
Are you using a drill press to drill out the pins? Thats what I do but it's a cheap one from Harbor Freight...Americans will know that store, very low quality tools for cheap. It wobbles...not very stable.
I think next I wanna do deluxe yeoman/aka yeoman mechanic but the only thing is I want an awl. I suppose I could give up the hook and add spacers to mount the awl on the scissors spring. But then...no nail file anywhere on the knife...
How many yeomans do you have now??
-
@jaya_man said:
Has anybody tried doing a bladeless 91mm SAK? Would it be possible to retain the corkscrew or back layer phillips?Tried fitting one on a scissors layer replacing the hook. Unfortunately there is no backspring tension.
Sent from my iPhone using Tapatalk
I've done a blade less sak before. It's possible with some work. I'll have to dig through my photos or look here for one I did.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
