Show off your Sak mod's!
-
I'm past due for pics so here's a bunch.
Really diggin the Compact Explorer/Yeoman whatever. Do you find that these hook nail files wear out from being exposed? I got a used Compact with the file surface on hook and it works...kinda, but it's no where near as "cutting" as the Sportsman type nail file.
I thought maybe having it on the "outside" of the knife meant it's gonna get rubbed against surfaces and eventually lose its "grit". Man that is a great build. Has me thinking of doing a Compact LED Lite/Phillips. Great travels SAK.
Screwdriver PLUS bottle of wine afterwards.What blade is it I see there in the one with the bit driver? Looks like a 93mm Alox thickness blade.
Pretty ones all.
No idea on the nail file as that's for a customer.
It's a regular sized blade in. Maybe just the angle. I can substitute the awl for the hook for people who prefer it ;) -
Added another couple of layers to this one.


Sent from my iPhone using Tapatalk
-
Recently finished this one... Just slimmed down a Swisschamp and took out the wood saw and fish scaler... Also replaced the chisel for a fine screw driver and rearranged the layers. Now I have a multi tool dedicated for SAK modding... Think I'll just call it The Modder (for lack of a better name) [emoji23][emoji23][emoji23]


No sooner after The Modder was completed, it was called into service. Assisting on another build by removing scales, pulling out bushings and filing flat pins pre-peening and filing out excess pins before putting on new scales.
Thanks to The Modder, I now have another Yeoman for EDC...

Sent from my iPhone using Tapatalk
-
@jaya_man said:
Recently finished this one... Just slimmed down a Swisschamp and took out the wood saw and fish scaler... Also replaced the chisel for a fine screw driver and rearranged the layers. Now I have a multi tool dedicated for SAK modding... Think I'll just call it The Modder (for lack of a better name) [emoji23][emoji23][emoji23]

No sooner after The Modder was completed, it was called into service. Assisting on another build by removing scales, pulling out bushings and filing flat pins pre-peening and filing out excess pins before putting on new scales.
Thanks to The Modder, I now have another Yeoman for EDC...

Sent from my iPhone using Tapatalk
Very cool!
-
Recently finished this one... Just slimmed down a Swisschamp and took out the wood saw and fish scaler... Also replaced the chisel for a fine screw driver and rearranged the layers. Now I have a multi tool dedicated for SAK modding... Think I'll just call it The Modder (for lack of a better name) [emoji23][emoji23][emoji23]


No sooner after The Modder was completed, it was called into service. Assisting on another build by removing scales, pulling out bushings and filing flat pins pre-peening and filing out excess pins before putting on new scales.
Thanks to The Modder, I now have another Yeoman for EDC...

Sent from my iPhone using Tapatalk
Very cool!
Thanks Windson

Sent from my iPhone using Tapatalk
-
Good stuff jaya

-
-
@jaya_man said:
Recently finished this one... Just slimmed down a Swisschamp and took out the wood saw and fish scaler... Also replaced the chisel for a fine screw driver and rearranged the layers. Now I have a multi tool dedicated for SAK modding... Think I'll just call it The Modder (for lack of a better name) [emoji23][emoji23][emoji23]

No sooner after The Modder was completed, it was called into service. Assisting on another build by removing scales, pulling out bushings and filing flat pins pre-peening and filing out excess pins before putting on new scales.
Thanks to The Modder, I now have another Yeoman for EDC...

Sent from my iPhone using Tapatalk
Nice toolset, jaya_man.
Same layout as one of my early mods:

I call mine the Deluxe Modeler. -
-
Recently finished this one... Just slimmed down a Swisschamp and took out the wood saw and fish scaler... Also replaced the chisel for a fine screw driver and rearranged the layers. Now I have a multi tool dedicated for SAK modding... Think I'll just call it The Modder (for lack of a better name) [emoji23][emoji23][emoji23]


No sooner after The Modder was completed, it was called into service. Assisting on another build by removing scales, pulling out bushings and filing flat pins pre-peening and filing out excess pins before putting on new scales.
Thanks to The Modder, I now have another Yeoman for EDC...

Sent from my iPhone using Tapatalk
Nice toolset, jaya_man.
Same layout as one of my early mods:

I call mine the Deluxe Modeler.Ahhh... That's a nice one

Sent from my iPhone using Tapatalk
-
Great stuff jaya! I love the Yeoman

-
-
Has anybody tried doing a bladeless 91mm SAK? Would it be possible to retain the corkscrew or back layer phillips?
Tried fitting one on a scissors layer replacing the hook. Unfortunately there is no backspring tension.
Sent from my iPhone using Tapatalk
-
@jaya_man said:
Now I have a multi tool dedicated for SAK modding... Think I'll just call it The ModderA SAK SAK! That's cool.
I use an old Wenger with scratched blade to remove scales. Thinking about sharpening the awl so I can mark the center of pins for drilling. Doesn't have metal file though. I forget the name of that watch makers knife, watckmakerhöffer or something, seems like it would be useful for working on saks. But expensive.
Are you using a drill press to drill out the pins? Thats what I do but it's a cheap one from Harbor Freight...Americans will know that store, very low quality tools for cheap. It wobbles...not very stable.
I think next I wanna do deluxe yeoman/aka yeoman mechanic but the only thing is I want an awl. I suppose I could give up the hook and add spacers to mount the awl on the scissors spring. But then...no nail file anywhere on the knife...
How many yeomans do you have now??
-
@jaya_man said:
Has anybody tried doing a bladeless 91mm SAK? Would it be possible to retain the corkscrew or back layer phillips?Tried fitting one on a scissors layer replacing the hook. Unfortunately there is no backspring tension.
Sent from my iPhone using Tapatalk
I've done a blade less sak before. It's possible with some work. I'll have to dig through my photos or look here for one I did.
-
Now I have a multi tool dedicated for SAK modding... Think I'll just call it The Modder
A SAK SAK! That's cool.
I use an old Wenger with scratched blade to remove scales. Thinking about sharpening the awl so I can mark the center of pins for drilling. Doesn't have metal file though. I forget the name of that watch makers knife, watckmakerhöffer or something, seems like it would be useful for working on saks. But expensive.
Are you using a drill press to drill out the pins? Thats what I do but it's a cheap one from Harbor Freight...Americans will know that store, very low quality tools for cheap. It wobbles...not very stable.
I think next I wanna do deluxe yeoman/aka yeoman mechanic but the only thing is I want an awl. I suppose I could give up the hook and add spacers to mount the awl on the scissors spring. But then...no nail file anywhere on the knife...
How many yeomans do you have now??
I have a watch case opener that Victorinox makes. But its old and rare that I dont want to risk it. To open scales I just use a dulled up small blade.
I have a cheap rotary tool (similar to Dremel) that I use to drill out pins. Though will need a drill press if I were to start on mods requiring resizing pivot holes. [emoji23]
I have 2 yeomans as of this moment.

Yup, doing a Yeoman means sacrificing between awl and hook. I have a Yeoman Woodsaw which has the awl... [emoji16]
Sent from my iPhone using Tapatalk
-
Holly cow!!
It took me what seems like forever to browse through this thread!!
It was well worth it! Som many great pictures of mods, also many that weren't available anymore, but still it was enough to see that there are plenty of talented people around here!!I'd also like to share one of the two mods I've made so far. nothing fancy, but I love DIY work, so... Work in progress right? :D
I took a Cybertool 34, removed the opener layer, replaced the corkscrew with the awl, changed the scales with hand-made aluminum ones (not anodized though), and added a pocket clip.
Also had to make two brass washers, one for the blade, and one for the awl.








-
This is the first SAK mod that I've made, but forgot to take pictures when I did it, so here are fresh ones.
The 2 you see in pictures were made out of a MiniChamp, a well worn Alox Classic, and a very old and beaten Rambler (the scales were broken, and the blade was very abused).
Out of it came an Alox Vagabond, and a not yet named one with the leftovers.
In the very near future, I intend to take the Vagabond apart and mod it further, to be able to accommodate a flash drive.




-
Nice work FlnixNOver

Sent from my SM-G920R4 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
