Been doing some work in the Wiki
-
You know, we need editors for the Multitool Encyclopedia too

What kind of work is needed, exactly?
Mostly we need new articles written, and proofreading of current articles. There is a link to the "How To" page for the wiki in my signature, and if you want to make edits and make new pages, I can send you the passcode needed to register.
Amusingly enough, the MTwiki actually benefited from being neglected for so long, and even with a very small group of editors, cleaning up the old code was quick and painless. The SAKwiki is still being cleaned up, despite having much more enthusiasm and support.
-
Hi Little Tinker
Well you have certainly been doing some BIG Tinkering.
The tool matrices are a great idea - although the 5 layer page seems to show the 3 layer models - Maybe this is still WIP??
I like the updated front back designation .....
One slight bug/issue - The tool table when I see it overlaps the brand, layer, size keys/links down the right hand side of the page.....Edit - I also love the Related Knives section in the Tools pages
I have a couple of suggestions on the tables.
- To save width how about bringing in a two or three letter code for each of the tools - You know the sort of thing: MB, SB, CO, SD, A, CS, KR for instance for a Spartan - We could store the key somewhere in a link or even put it on each page, or update the tool page with the abbreviations ??
- Again to save width, and given that just about every SAK has the Spartan tool set - How about missing out those tools from the table and just putting a note where there is a variation (eg for Compacts)? - So there would be one column for the Spartan toolset - And that column would be blank for all knives that contained the Spartan tool set - Then there would be a note number in that column - For instance Note 1 for a Automobile would say the Spartan small blade is replaced by the Technicians screwdriver - Not sure how well that would work - Might get a bit messy ....... ???
- I see you put all the tools in alphabetical order - But how about a more SAK centric logical order with the most common tools starting with the Spartan toolset first (assuming we don't remove this! ;) as per suggestion 2) and listing all the tools in the Swisschamp next - Then the less common tools - So the order would be something like:
MB, SB, CO, SD, A, CS, KR, Tp, Tw, Sc, WS, MF, FS, Ph, MG, Pl - followed by all the more unusual tools grouping similar tool together eg PB, MB(S), MB(PS), EB etc etc ??? ???
Edit - It all seems like a lot of work for you - although I get the impression you are pretty good at this type of stuff - So hopefully can make it a bit easier
Anyway -** respect and thanks **

And I have been doing my own Tinkering - So here is a summary:
-
Reworded the Spartan introductory paragraph
-
Re structured the Champion tool section - to clearly show similarities and differences between the 6 and 7 layer versions
-
Updated the history of the Champion Plus
-
Added some references to the 111mm 2 layer models back to the 91mm models
-
Looking great so far.

Huntsman covered all I wanted to say as far as the work done so far. Let me know if you encounter any permission problems with the wiki.
-
Been away for ages, just wanted to say hi to everybody and to thank those keeping up the good work with the wiki!
As far as Wenger is related, I remember I had a lot of plans to add small edits and few knives (mostly from the "Wenger love" thread).
Will try to find material of what I was planning to do and pass it to the new super-editors! -
@Huntsman said:
I have a couple of suggestions on the tables.
<SNIP>Thanks, all good ideas. It would be awkward to adjust the current approach to do the Spartan plus / minus thing, but I have thought of similar. Did you notice the "Tools common to all knives" section that tries to do a similar thing of shrinking down the horizontal width by excluding those tools from the table?
I've put a vertical-text label in, which is somewhat hard to read but does a lot (IMHO) to keep the data more legible overall. Comments welcome.
I agree on sorting the columns from most to least 'used', and think the Spartan -> Champ -> Other arrangement is good. I'll do that next, with a twist of tweak it a bit to keep all the blades together so it is easy to see what is in place of a standard blade.
-
Wow - Totally** awesome** work Little Tinker - Thank you
The new look tables are just fab :o :D

(And you sorted out the overlap with the index, and I think you got all the layers down to one table - Yay)The vertical text looks a little weird to start with - But is readable and works perfectly once you get used to it - And better than abbreviations IMHO - as it avoids all confusion and a cross reference
The common tools to all knives is great and works really well - Better approach than my suggestion - One minor comment - I would put all those tools in a horizontal line - Just to save scrolling/space
One comment on the 6+ layer page - The Cyber tools are missing and also the a/b and c versions of the Champion - The a/bs are six layer and have corkscrew/Phillips respectively and the c is seven layer - Maybe this is just WIP
EDIT2: Re the Spartan/common/Champ grouping of the tools - As well as all that it would be good to group by layer then back then scale tools too. I have a spready that does this let me know if you want me to send it to you for a quick gander
EDIT: Oh man I just looked at the source tiki for your new layer tables - Not simple :o - I hope you automated the creation of those somehow - And switching the columns around will be a nightmare??
Even more respect and awe !! ;)
Although making the common tools into one line is easy!!And I guess once these tables are done they are done - And unlikely to need much maintenance
- Maybe just the odd new SAK every now and then - Although I don't think that has happened in the Vic line up for over a decade, possibly not since the Cyber tools in 2000 - with the exception of the Pioneer X and the Delemonts -
They seem to be more prone to reducing, rather than expanding, their SAK product line these days!!
Although there was that comment/hint from Charles Elsener (I think it was on Facebook) about big changes next year
Watch this space :o
H - Maybe just the odd new SAK every now and then - Although I don't think that has happened in the Vic line up for over a decade, possibly not since the Cyber tools in 2000 - with the exception of the Pioneer X and the Delemonts -
-
Agreed, looks excellent. And having worked with and created a few fancytables on the wiki, I know how tricky they can be.
As for the vertical text for the tools, might I suggest making it ALL CAPS? It is much more readable, at least to my eyes, less adjustment.
For instance:
F
l
a
s
h
l
i
g
h
tvrs
F
L
A
S
H
L
I
G
H
T -
@enki_ck said:
Agreed, looks excellent. And having worked with and created a few fancytables on the wiki, I know how tricky they can be.As for the vertical text for the tools, might I suggest making it ALL CAPS? It is much more readable, at least to my eyes, less adjustment.
For instance:
F
l
a
s
h
l
i
g
h
tvrs
F
L
A
S
H
L
I
G
H
TI think that's very illuminating ;). I'll put it in the next round of work.
-
Looks very good

-
I'll add the 84mm layer tables and the "Related Knife" sections to each tool page next.
For those worrying about my sanity
... All of this is automated. Excel spreadsheets contain the data, with some VBA code behind it to squirt out the Wiki code, which then just gets copy / pasted into the actual Wiki editor. Each incremental change isn't much effort, but I'm quite pleased with how they've all added up to something quite useful :) -
@Huntsman said:
EDIT2: ...it would be good to group by layer then back then scale tools too. I have a spready that does this let me know if you want me to send it to you for a quick ganderI initially read this to mean you have a chart of which layer each tool is in, so we could put L1 to indicate the blades are in the first layer, then L2 for scissors and L3 for openers on a Climber for example. I think could be handy for anyone who wanted to custom build discontinued items, or build Franken-knives while using the original orders on similar knives to potentially avoid "hiding" nail-nicks, etc. And SOOOO OCD - what's not to like ::).
Or did you just mean a simple list of whether each tool is layer / scale / back? If so then I think we have that covered now (Phillis and fine screwdriver being a bit special because they appear in multiple places...), but let me know if you think the grouping / ordering should be changed.
-
This maybe a stupid question but has anyone thought about doing a partnership with a company that edit hardcover books to print the content of the wiki on a yearly basis for instance?
I would buy it and this could be a way to support this forum and the wiki contributors while having good info from SAK speSmurfpillsts.I know there are companies which do that for blogs for instance, and even for your Facebook publications. I believe they take a small fee but maybe a poll would give an idea of the number of people willing to buy such a great encyclopedia
Anyway just a thought
</Gee via Tapatalk>
-
@Gee.B said:
This maybe a stupid question but has anyone thought about doing a partnership with a company that edit hardcover books to print the content of the wiki on a yearly basis for instance?
I would buy it and this could be a way to support this forum and the wiki contributors while having good info from SAK speSmurfpillsts.I know there are companies which do that for blogs for instance, and even for your Facebook publications. I believe they take a small fee but maybe a poll would give an idea of the number of people willing to buy such a great encyclopedia
Anyway just a thought
</Gee via Tapatalk>
Books have been brought up several times over the years ( I believe J-Sews and Grant both have made plans for one), but there's just not enough support for them. Printers are expensive, and since the information is already free online, who would be willing to shell out the money to cover the book cost?
-
@Little Tinker said:
EDIT2: ...it would be good to group by layer then back then scale tools too. I have a spready that does this let me know if you want me to send it to you for a quick gander
I initially read this to mean you have a chart of which layer each tool is in, so we could put L1 to indicate the blades are in the first layer, then L2 for scissors and L3 for openers on a Climber for example. I think could be handy for anyone who wanted to custom build discontinued items, or build Franken-knives while using the original orders on similar knives to potentially avoid "hiding" nail-nicks, etc. And SOOOO OCD - what's not to like ::).
Or did you just mean a simple list of whether each tool is layer / scale / back? If so then I think we have that covered now (Phillis and fine screwdriver being a bit special because they appear in multiple places...), but let me know if you think the grouping / ordering should be changed.Hi LT,
Looks really good - Enki's suggestion on the caps really makes the vertical lettering much easier to read - Well done both
Sorry for the confusion.
What I meant was that in the existing tables you just group the layer tools together, the backspring tools together, then the scale tools together.
I think this will make it much, much easier to readSo for instance the three layer table would be LB, SmB, PrB, SerB, Tec SD, BO, CO, Comb, Sc, WS, MS, Pl, CT, Fl, MG, Ph, CS, Aw, H, Fine, Ch, Mini Tp, Tw, Pin, Pen, Alti, KR
I put the Tec SD next to the SmB/PrB as it usually replaces them; the MG at the end of the Layers, next to the Phillips as they usually sit together, and the Ph can be a layer or a back spring; also the Fl is next to the MG as they are sometimes together, and near the Ph; I just stuck the KR at the end (as its not too important ?? :o )
Also as you have already done the tools that replace each other are next to each other - Also if they are in the same layer they are next to/near each other.
Did you say that the Fine SD can be both too? So that could be a problem. Or was that just the Fine SD vs the Tec SD?Now I definitely know you automate the creation - and as you asked - I feel I can suggest this
:)
And apologies if this contradicts an earlier comment about keeping the Spartan tools together - But this is better :o
The layer order table I would not be so bothered about - Just me !!I also noticed that the MB and Awl links in the common tools do not work and there is the ~hs~ as you mention - Is that just a space? if so could it just be made a real space, as opposed to a space command ???
And there is one more model that could go in the 6 layer table - It is a Handyman variation - Which the Wiki says is a SABI version, but I think could be an older version - So it could be known as Handyman (old) - Anyway the Fish Scaler replaces the pliers.
I could even try this myself - I think adding a row would be easy enough!! Moving column around - No way!!!As for my changes - Tiny - compared to LT's magic
-
I have updated the Cybertool headings to mention S,M,L (thereby messing up the links in the first para) - Can any body help - I think it does not like the brackets in the headings ??? I tried a slash too this also did not work :(
-
And I updated the Lumberjack details by moving a couple of bits of information from 'variations' to 'history'
Re Books GeeB - A dump of the WIKI would be good.
As mentioned there have been a few over the years - Some are referenced in the WIKI - Most are out of print I think
Many of us here are waiting for JazzBass's book - which will be just amazing - And way better than a WIKI dumpJB is probably our most knowledgeable member when it comes to history, models and variations of SAKs
PS. Why is your name G.B when your flag is French !! :o ;)
-
-
PS. Tool sequence to be the same in all layer tables ......... of course .......... ;) :o :D
-
@Huntsman said:
And there is one more model that could go in the 6 layer table - It is a Handyman variation - Which the Wiki says is a SABI version, but I think could be an older version - So it could be known as Handyman (old) - Anyway the Fish Scaler replaces the pliers.
I could even try this myself - I think adding a row would be easy enough!! Moving column around - No way!!!Lots of good ideas in there that I'll think about.
Be careful with small edits to the tables since a bulk update (more will be coming to fix the ~hs~, etc...) of the tables will trample on any local edit there, so if knives are missing then adding them to the Wiki pages is the way to go. I'll periodically refresh the data from those pages. Pages that describe multiple knives (Cybertool, Champion, etc) are special because they can't easily be parsed, so I do have to manage the knife / tool data for those manually. So maybe that is the way to handle notable knife variants like the "Handyman (Old)"- I can add a "special" row for as if it were a second knife on the Handyman page. Maybe we could invent a way to "encode" those variants so they can all be picked up, "Handyman (Old): ADD Scaler; REMOVE Pliers - Interesting notes". Sounds complicated already...
Changing the ordering isn't too hard. As per your next post there is a master list of left-right order, currently around the Spartan -> Champ -> Other model but it can be anything. I tried a couple of variants but there always seemd to be an outlier that made several choices good but not perfect. I'll take a look at what you suggest to see if it snaps into place
.The ~hs~ thing is odd. It works if placed in a page "locally" but seems to not do so if using the INCLUDE magic. I'll swap them for standard spaces, or HTML <nb> which might work.
-
- I have updated the Cybertool headings to mention S,M,L (thereby messing up the links in the first para) - Can any body help - I think it does not like the brackets in the headings ??? I tried a slash too this also did not work :(
Using F12 on the normal page view (not edit) in IE shows that TikiWIki turns the section heading into...
<h2 class="showhide_heading" id="CyberTool_29_S_">CyberTool 29 (S)</h2>EDIT: You can see the same id by hovering over the auto-generated contents links on the page.
So using
[#Cybertool_29_S_|Cybertool 29 (S)],as the Wiki code seems to work.
I guess the algorithm is something like turn all non-text characters into underscore, and compress multiple ones to single: Cybertool 29 (S) ->Cybertool_29__S_ -> Cybertool_29_S_
-
Might I suggest adding an index somewhere at the beginning of the page that explains the abbreviations used? Or did I miss it? I understand that L means the tool is found as inside the SAK, aka a layered tool, S stands for scale tool, B stands for back layer tool, but the occasional browser of SAKwiki might not know that.
Just a thought :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
