Show off your Sak mod's!
-
Nice work FlnixNOver

Sent from my SM-G920R4 using Tapatalk
-
Thanks!
Hopefully there will be more in the future.
I have a few ideas, now it's just a matter of implementing them :D -
Some very cool mods FlnixNOver


-
Also welcome to

-
@FInixNOver said:
I took a Cybertool 34, removed the opener layer, replaced the corkscrew with the awl, changed the scales with hand-made aluminum ones (not anodized though), and added a pocket clip.:o

Jeez. I'm gonna quit. Top rate stuff there.

How did you cut out that area in the scale for the pliers rivet?

-
I took a Cybertool 34, removed the opener layer, replaced the corkscrew with the awl, changed the scales with hand-made aluminum ones (not anodized though), and added a pocket clip.
:o

Jeez. I'm gonna quit. Top rate stuff there.

How did you cut out that area in the scale for the pliers rivet?
I used a dremel with an 194 High Speed Cutter attachment equivalent, and a whole lot of patience.
I had to constantly stop and check with the callipers, to make sure I had taken enough material out without ruining the scale.
I worked out ok. I could have kept the original tool layout, but that would require a liner next to the scale because of the cybertool, and it would add to the overall thickness of the SAK.Ideally it would have been done in a CNC machine, but I don't have an easy access to one, and it's way more fun (and a bit nerve racking at times) to do it miself!

-
Bladeless 91mm ... Got my Hacker Badge... Woohooo... [emoji8]




Sent from my iPhone using Tapatalk
-
Very nice j-manzal!
Did you have to tinker much with the corkscrew spring to fit the metal file? Lovely combo - might have to have a go at one myself in the future. 
-
@magentus said:
Very nice j-manzal!
Did you have to tinker much with the corkscrew spring to fit the metal file? Lovely combo - might have to have a go at one myself in the future. 
Yes I did... Had to fashion out a custom stopper from a scissors backspring... Details here:
/topic/68332
Sent from my iPhone using Tapatalk
-
Very nice j-manzal!
Did you have to tinker much with the corkscrew spring to fit the metal file? Lovely combo - might have to have a go at one myself in the future. 
Yes I did... Had to fashion out a custom stopper from a scissors backspring... Details here:
/topic/68332
Sent from my iPhone using Tapatalk
I'll pop over and have a look -
Bladeless 91mm ... Got my Hacker Badge... Woohooo... [emoji8]




Sent from my iPhone using Tapatalk
Very cool mod! Nice tool set.
And if a blade is needed, it can always be complemented with an Alox Solo or some other folder!Agree. This bladeless will soon take up space in my car's tool box. And I always carry a SAK anyway, Minichamp at least...

Sent from my iPad using Tapatalk
-
Very nice j-manzal!
Did you have to tinker much with the corkscrew spring to fit the metal file? Lovely combo - might have to have a go at one myself in the future. 
Yes I did... Had to fashion out a custom stopper from a scissors backspring... Details here:
/topic/68332
Sent from my iPhone using Tapatalk
I'll pop over and have a look
Sent from my iPad using Tapatalk
-
@FInixNOver said:
I used a dremel with an 194 High Speed Cutter attachment equivalent, and a whole lot of patience.
I had to constantly stop and check with the callipers, to make sure I had taken enough material out without ruining the scale.
I worked out ok. I could have kept the original tool layout, but that would require a liner next to the scale because of the cybertool, and it would add to the overall thickness of the SAK.Ideally it would have been done in a CNC machine, but I don't have an easy access to one, and it's way more fun (and a bit nerve racking at times) to do it miself!

Turned out great! Looks CNC'ed in the pic.
-
I used a dremel with an 194 High Speed Cutter attachment equivalent, and a whole lot of patience.
I had to constantly stop and check with the callipers, to make sure I had taken enough material out without ruining the scale.
I worked out ok. I could have kept the original tool layout, but that would require a liner next to the scale because of the cybertool, and it would add to the overall thickness of the SAK.Ideally it would have been done in a CNC machine, but I don't have an easy access to one, and it's way more fun (and a bit nerve racking at times) to do it miself!

Turned out great! Looks CNC'ed in the pic.
Yeah, I guess... But looking at it live you can see the imperfections. However, I'm really happy with how it turned out!
-
Finally had a moment to test fit my 84mm build.
Thanks to GigaHz for helping me source the WS layer.
I was gonna try some kookier stuff but in the end its just a "Huntsman Small" with a nail file instead of small blade. Thought about doing a backside phillips but the corkscrew won out.
Hoping to get this peened up tonight...wondering if theres a way to mod the scales to fit a pen (old style removable 58mm if the 91mm pen wont fit)


-
@JamesJ said:
Finally had a moment to test fit my 84mm build.Thanks to GigaHz for helping me source the WS layer.
I was gonna try some kookier stuff but in the end its just a "Huntsman Small" with a nail file instead of small blade. Thought about doing a backside phillips but the corkscrew won out.
Hoping to get this peened up tonight...wondering if theres a way to mod the scales to fit a pen (old style removable 58mm if the 91mm pen wont fit)
Can't wait to see the final result James. Is that a standard 84mm scissor I see?
Sent from my iPhone using Tapatalk
-
Can't wait to see the final result James. Is that a standard 84mm scissor I see?
Yeah, from a Golfer. It's all 84mm donors on this one.
And I am planning to do an 84mm Golfer [emoji23][emoji23][emoji23]

Here it is...I overdid it on the pin that the springs rotate on...so there's a little tightness on the openers layer, mainy the can opener. Hoping after a bunch of open/closing and after oil gets in there it'll be a bit better. Otherwise everything is working. I like the size and wanna try it as EDC instead of Sheila for a while. Though I've been using the pen a lot over the last week...so might miss that.
Also might polish wheel the tools...maybe not... not sure yet.




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login