Show off your Sak mod's!
-
Very nice j-manzal!
Did you have to tinker much with the corkscrew spring to fit the metal file? Lovely combo - might have to have a go at one myself in the future. 
-
@magentus said:
Very nice j-manzal!
Did you have to tinker much with the corkscrew spring to fit the metal file? Lovely combo - might have to have a go at one myself in the future. 
Yes I did... Had to fashion out a custom stopper from a scissors backspring... Details here:
/topic/68332
Sent from my iPhone using Tapatalk
-
Very nice j-manzal!
Did you have to tinker much with the corkscrew spring to fit the metal file? Lovely combo - might have to have a go at one myself in the future. 
Yes I did... Had to fashion out a custom stopper from a scissors backspring... Details here:
/topic/68332
Sent from my iPhone using Tapatalk
I'll pop over and have a look -
Bladeless 91mm ... Got my Hacker Badge... Woohooo... [emoji8]




Sent from my iPhone using Tapatalk
Very cool mod! Nice tool set.
And if a blade is needed, it can always be complemented with an Alox Solo or some other folder!Agree. This bladeless will soon take up space in my car's tool box. And I always carry a SAK anyway, Minichamp at least...

Sent from my iPad using Tapatalk
-
Very nice j-manzal!
Did you have to tinker much with the corkscrew spring to fit the metal file? Lovely combo - might have to have a go at one myself in the future. 
Yes I did... Had to fashion out a custom stopper from a scissors backspring... Details here:
/topic/68332
Sent from my iPhone using Tapatalk
I'll pop over and have a look
Sent from my iPad using Tapatalk
-
@FInixNOver said:
I used a dremel with an 194 High Speed Cutter attachment equivalent, and a whole lot of patience.
I had to constantly stop and check with the callipers, to make sure I had taken enough material out without ruining the scale.
I worked out ok. I could have kept the original tool layout, but that would require a liner next to the scale because of the cybertool, and it would add to the overall thickness of the SAK.Ideally it would have been done in a CNC machine, but I don't have an easy access to one, and it's way more fun (and a bit nerve racking at times) to do it miself!

Turned out great! Looks CNC'ed in the pic.
-
I used a dremel with an 194 High Speed Cutter attachment equivalent, and a whole lot of patience.
I had to constantly stop and check with the callipers, to make sure I had taken enough material out without ruining the scale.
I worked out ok. I could have kept the original tool layout, but that would require a liner next to the scale because of the cybertool, and it would add to the overall thickness of the SAK.Ideally it would have been done in a CNC machine, but I don't have an easy access to one, and it's way more fun (and a bit nerve racking at times) to do it miself!

Turned out great! Looks CNC'ed in the pic.
Yeah, I guess... But looking at it live you can see the imperfections. However, I'm really happy with how it turned out!
-
Finally had a moment to test fit my 84mm build.
Thanks to GigaHz for helping me source the WS layer.
I was gonna try some kookier stuff but in the end its just a "Huntsman Small" with a nail file instead of small blade. Thought about doing a backside phillips but the corkscrew won out.
Hoping to get this peened up tonight...wondering if theres a way to mod the scales to fit a pen (old style removable 58mm if the 91mm pen wont fit)


-
@JamesJ said:
Finally had a moment to test fit my 84mm build.Thanks to GigaHz for helping me source the WS layer.
I was gonna try some kookier stuff but in the end its just a "Huntsman Small" with a nail file instead of small blade. Thought about doing a backside phillips but the corkscrew won out.
Hoping to get this peened up tonight...wondering if theres a way to mod the scales to fit a pen (old style removable 58mm if the 91mm pen wont fit)
Can't wait to see the final result James. Is that a standard 84mm scissor I see?
Sent from my iPhone using Tapatalk
-
Can't wait to see the final result James. Is that a standard 84mm scissor I see?
Yeah, from a Golfer. It's all 84mm donors on this one.
And I am planning to do an 84mm Golfer [emoji23][emoji23][emoji23]

Here it is...I overdid it on the pin that the springs rotate on...so there's a little tightness on the openers layer, mainy the can opener. Hoping after a bunch of open/closing and after oil gets in there it'll be a bit better. Otherwise everything is working. I like the size and wanna try it as EDC instead of Sheila for a while. Though I've been using the pen a lot over the last week...so might miss that.
Also might polish wheel the tools...maybe not... not sure yet.




-
Went ahead and did a quick cat and coffee shot to see how well this SAK will work on the forum...

-
Can't wait to see the final result James. Is that a standard 84mm scissor I see?
Yeah, from a Golfer. It's all 84mm donors on this one.
And I am planning to do an 84mm Golfer [emoji23][emoji23][emoji23]

Here it is...I overdid it on the pin that the springs rotate on...so there's a little tightness on the openers layer, mainy the can opener. Hoping after a bunch of open/closing and after oil gets in there it'll be a bit better. Otherwise everything is working. I like the size and wanna try it as EDC instead of Sheila for a while. Though I've been using the pen a lot over the last week...so might miss that.
Also might polish wheel the tools...maybe not... not sure yet.
Did over peen as well on some of my builds. The trick I found was to wiggle the tool in question left and right while opening and closing...
Awesome build by the way... Reminds me of the small huntsman [emoji8]
Sent from my iPhone using Tapatalk
-
I wiggled the tools and stopped hammering as soon as the play was gone..unfortunately there's no way to wiggle the spring. Pretty sure its the spring getting stuck. When I deploy the awl it's loose. Not "side to side" loose, but loose like theres no spring pressure, then if I open can opener or bottle opener and close it again, the awl is tight. So I think the spring isn't moving freely. Like it's getting stuck in a position that makes the awl loose and the can opener tight...but when I do get the can opener deployed, then the awl behaves correctly. Gonna watch it more closely next time.
Main thing I'm excited about is the nail file. Got a Wenger build coming up though that will be all these tools plus the IL phillips/wrench layer. Curious to see how they compare.

-
Yaknow I think I might be wrong about the sticking can opener...now the awl is behaving as normal (after a lot of open/closing).
The can opener spins fine, but if closed gently doesn't snap all the way down. It can easily be opened from this position. If I push it all the way down/closed, then it becomes hard to open.
So maybe it's binding on the liners...?
-
@JamesJ said:
Yaknow I think I might be wrong about the sticking can opener...now the awl is behaving as normal (after a lot of open/closing).The can opener spins fine, but if closed gently doesn't snap all the way down. It can easily be opened from this position. If I push it all the way down/closed, then it becomes hard to open.
So maybe it's binding on the liners...?
Could be the liners... Could also mean the backspring itself is the problem...
Did you use stock 2.2mm pins or had to use a larger diameter pin and bring it down to 2.2mm?
Sent from my iPhone using Tapatalk
-
Yaknow I think I might be wrong about the sticking can opener...now the awl is behaving as normal (after a lot of open/closing).
The can opener spins fine, but if closed gently doesn't snap all the way down. It can easily be opened from this position. If I push it all the way down/closed, then it becomes hard to open.
So maybe it's binding on the liners...?
Could be the liners... Could also mean the backspring itself is the problem...
Did you use stock 2.2mm pins or had to use a larger diameter pin and bring it down to 2.2mm?
Sent from my iPhone using Tapatalk
My gauge said they were between 2.23 and 2.26 after I reduced them
I think it's crowding between the scissors and can opener, when I open the scissors and then kind of press the can opener toward the scissors layer while opening, it moves easier. Could also be rubbing on the outer scale. It's totally flat but maybe I should have used one with the slight "bulge" stamped into it.
At least I know that I can use the can opener if I deploy the scissors first
-
Yaknow I think I might be wrong about the sticking can opener...now the awl is behaving as normal (after a lot of open/closing).
The can opener spins fine, but if closed gently doesn't snap all the way down. It can easily be opened from this position. If I push it all the way down/closed, then it becomes hard to open.
So maybe it's binding on the liners...?
Could be the liners... Could also mean the backspring itself is the problem...
Did you use stock 2.2mm pins or had to use a larger diameter pin and bring it down to 2.2mm?
Sent from my iPhone using Tapatalk
My gauge said they were between 2.23 and 2.26 after I reduced them
Had an experience once where I was test fitting tools using an existing pin... Tools worked out fine snappin and poppin. But when it was assembled using pins that where reduced in size, I had similar problems. Can't exactly pinpoint the cause then, either it was the center pins being over peened or the pins where reduced slightly smaller than 2.2mm..
Your pins should be alright then. Maybe its just some material stuck between backspring and liner.. Just taking a wild guess here...
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login