Leatherman Style VS. Victorinox Classic SD, a revisit
-
I have mine (a Minichamp actually) inside the sheath. The seath is attached to the keys. I remove the SAK from the seath before using it. Sometimes I remove the attached Ladubug also, if it annoys me.
Oh, the Minichamp Lite has many more tools/functions than the Style.
-
The battle of titans continues, I removed the scale on Style, and gave it a mirror polish throughout.
It is now lighter, thinner and handsomer.Very nice

Have you replaced the rivet/pin with a hollow one?
No, the rivet holding springs to the receiver is removed, a split ring is in place as lanyard bail
-
@Huntsman said:
This is a really interesting point Kampf
Although I have had a Classic for ages, usually on a key ring, and never had any problems
Although my main use of the tool is the scissors (nail trimming) so would not experience this problem!!Here is a Classic with its clothes off
The springs are all identical in the Classic/58mm line - Even the keyring spring is the same internally - as you can see - It just has the key ring loop as an addition on the end.
It is such a clever design. The thin tools (blade/nailfile etc) have a spring each, the thick tools (scisssors/combi) use two springsNormally the knife and nail file/SD are on the bottom - So they open over the keyring as you have shown.
But the knife could easily be built the other way, with the scissors on the bottom - opening over the key ring, which presumably would be better as no need to rotate the scissors.
And the knife/SD opening over the other end - so rotation (and cutting) would be easy, if you had keys on the ring!So the question is ........ 'Why did Vic make it the way they made it?' !!
Have you tried switching one of the springs, so all the implements open in the same direction? Could it work?
I don't know why the Classic and most 58 have the blade opening to the keyring side and the Rambler has it opening to the other side. It makes the Rambler so much more easy to use.
-
@Kampfer said:
I thought about buying an Alox Rambler (for the extra driver) for a long time, but never pulled the trigger because I didn't like to spend $50+ on a clumsy driver.I believe you can get the celidor Rambler for half that price. Not so thin, but you can take out the scales or replace them with thinner ones made by you.
-
@Kampfer said:
I thought about buying an Alox Rambler (for the extra driver) for a long time, but never pulled the trigger because I didn't like to spend $50+ on a clumsy driver.I did buy a burgundy Alox Rambler from Swiss Bianco, never regretted it, though I don't keep it on my keychain, but in a little leather slip made by Geoff Wood, which fits nicely in my coin pocket, keeps fluff out of the knife and protects the scales. The Rambler's layout is much better than the Classic SD, I have an Alox Classic, but hardly ever use it as don't like the knife being at the keyring end, and the Alox version is actually too thin IMHO, the Alox rambler is just a bit thicker, but easier to grip.
Also, I use the extra bottle opener/phillips screwdriver tool probably more than even the scissors, mostly for the screwdriver, it's such a useful size, especially when working around computers. -
Third, knife.
Style did a fine job, no problem there at all.
The Classic SD is so clumsy in knife mode it is almost un-useable.
Please Kampfer, it only takes 5 seconds to remove the classic from the keyring!

Detaching the tool from keyring to use it is not the design intent.
Be realistic , 5 second to take it off, 5 seconds to put it back on for every time?
How many people will do that? -
Third, knife.
Style did a fine job, no problem there at all.
The Classic SD is so clumsy in knife mode it is almost un-useable.
Please Kampfer, it only takes 5 seconds to remove the classic from the keyring!

Detaching the tool from keyring to use it is not the design intent.
Be realistic , 5 second to take it off, 5 seconds to put it back on for every time?
How many people will do that?Me, if I have to use the screwdriver or the knife comfortably
With scissors is not necessary
-
Yea but you are NOT my wife. :D
-
Here is a Classic with its clothes off

The springs are all identical in the Classic/58mm line - Even the keyring spring is the same internally - as you can see - It just has the key ring loop as an addition on the end.
It is such a clever design. The thin tools (blade/nailfile etc) have a spring each, the thick tools (scisssors/combi) use two springs
Normally the knife and nail file/SD are on the bottom - So they open over the keyring as you have shown.
But the knife could easily be built the other way, with the scissors on the bottom - opening over the key ring, which presumably would be better as no need to rotate the scissors.
And the knife/SD opening over the other end - so rotation (and cutting) would be easy, if you had keys on the ring!
So the question is ........ 'Why did Vic make it the way they made it?' !!Have you tried switching one of the springs, so all the implements open in the same direction? Could it work?
I don't know why the Classic and most 58 have the blade opening to the keyring side and the Rambler has it opening to the other side. It makes the Rambler so much more easy to use.Hey PFR,
Sorry missed this Q last month
Switching the springs over end to end - does not work - Although it looks like it would from the photo - eh?The springs will fit on the pins (I think) but the springs will not operate. The intelocking indentation and little knob don't fit together if you do this.
I tried it when I did my recent Rally repair.Tools sharing a layer on opposite sides of a 58mm **have to open **from the opposite ends of the knife.
Still puzzled as to why Vic did not build the Classic so the knife and SD open at the free and and the scisssors at the keyring end ???
The way they build them makes no sense in terms of how you use the tools.So you like the Rambler - eh ??? That's nice ;) :D 8)
-
Still puzzled as to why Vic did not build the Classic so the knife and SD open at the free and and the scisssors at the keyring end ???
The way they build them makes no sense in terms of how you use the tools....
I feel I might be the only one to actually like the keyring's placement on the Classic! I do prefer the Rambler for a number of reasons but, for the uninitiated, the keyring can be useful to get a better grip on the thing while using the implements.
I think?

-
Here is a Classic with its clothes off

The springs are all identical in the Classic/58mm line - Even the keyring spring is the same internally - as you can see - It just has the key ring loop as an addition on the end.
It is such a clever design. The thin tools (blade/nailfile etc) have a spring each, the thick tools (scisssors/combi) use two springs
Normally the knife and nail file/SD are on the bottom - So they open over the keyring as you have shown.
But the knife could easily be built the other way, with the scissors on the bottom - opening over the key ring, which presumably would be better as no need to rotate the scissors.
And the knife/SD opening over the other end - so rotation (and cutting) would be easy, if you had keys on the ring!
So the question is ........ 'Why did Vic make it the way they made it?' !!Have you tried switching one of the springs, so all the implements open in the same direction? Could it work?
I don't know why the Classic and most 58 have the blade opening to the keyring side and the Rambler has it opening to the other side. It makes the Rambler so much more easy to use.Hey PFR,
Sorry missed this Q last month
Switching the springs over end to end - does not work - Although it looks like it would from the photo - eh?The springs will fit on the pins (I think) but the springs will not operate. The intelocking indentation and little knob don't fit together if you do this.
I tried it when I did my recent Rally repair.Tools sharing a layer on opposite sides of a 58mm **have to open **from the opposite ends of the knife.
Still puzzled as to why Vic did not build the Classic so the knife and SD open at the free and and the scisssors at the keyring end ???
The way they build them makes no sense in terms of how you use the tools.So you like the Rambler - eh ??? That's nice ;) :D 8)
No worries, thanks for the A.

Looking carefully at the springs, they look like they would "block" each other if facing the same way.
Rambler hasn't left my pocket since I got it. Only thing I might change is put a pen in it, upgrade it to Manager. I always have pens (yeah, plural) with me, so I might not need it.

Thanks again for it!

As for the springs, it would look like this:
Maybe filing off those 4 small tips touching each other. Could we do that? Will it cause the springs to not work properly?...


-
Have to agree that using the blade on a classic while attached to a key chain is not much fun and difficult to understand as a design choice. The manager is only a little fatter and has the blade pivot on the other side to the classic. Same issue with the drivers however.
-
Wenger Esquire maybe?
-
I thought the Style was okay, but it suffers from the one major drawback of every keychain sized Leatherman. It has a chisel-ground blade.
I find those unpleasant to resharpen. REALLY unpleasant. This is less a deal-breaker with other supposed keychain sized tools that have big scissors or pliers, like the Micra, Crosscut, Squirt, or the other models of the Style (PS and CS), where the blade isn't the main feature.
I ALSO don't like the Classic's keyring placement.
I'm afraid the Rambler is the winner for me, in the 'I'd ever actually put it on a keychain' tool category.
Thanks for the review!
-
I actually find chisel grind to be incredibly quick and easy to sharpen. You're only really doing half the work plus deburr.
I have a rambler which has yet to go on my keychain as the Style CS is firmly attached to it. I keep meaning to try out the SAK but never quite get round to it. I had however very certainly decided on using a mini carabiner. The built in one on the Style CS is genius.
-
I don't have a Style, I do have many 58mm SAKs. Kampfers keyring placement point is valid, I'm taking my MiniChamp off the keychain before use. My other MiniChamp gets carried in a belt sheath, so no problem there.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
