CyberTool owners thread
-
The small phillips is handy if you need to change your watch battery or fix a camera or other small device. The hex and torx, I don't think I've ever used on the cybertool. It would be nice if there was a 0/00 phillips available as a layer tool in 91mm, like there is in 111mm.
-
Well my Cybertool Lite arrived today. It is destined for immediate destruction as a donor to other FrankenKnives, which I'm quite pleased about as it is something of a lump :o. Not sure I'd be happy if I'd bought this to carry as is :P.
The main reason for getting it was to put the magnifier / lite layer (which only appears on this knife) into a Phillips back-tool knife. Unsure what I'll do with the Cyber layer, but trying to think of something other than adding it to a Spartan base. Cyber Compact, Cyber Climber, Cyber Mountaineer, etc are under consideration...
-
@shibafu said:
The small phillips is handy if you need to change your watch battery or fix a camera or other small device. The hex and torx, I don't think I've ever used on the cybertool. It would be nice if there was a 0/00 phillips available as a layer tool in 91mm, like there is in 111mm.When you work with Mac then you will start using torx, they use T6, T8 & T10. T15 and T25 get more common in computers too. That is why I ditched the hex for more torx.
-
Such a wonderful thread and pictures. :) The Cybertool models are amongst my very favorite Victorinox 91mm models. So versatile.

-
My forest green Cybertool is MIA, I'm hoping buried in my van somewhere, but I suspect it is out there making someone elses day that much easier.
-
Couldn't think quite where I'd left my normal small screwdriver set today when I needed to open up a laptop to tinker with the insides. CyberTool Lite to the rescue :D. Not the easiest thing to spin to unscrew them, but definitely a win overall. It has reinforced my view that I'd rather the CT was in a slimmer overall configuration, so will be working on that as time permits ;).
-
I want to join the club, but am unsure if I can find any that fit into my non-redundancy sak philosophy
Ideally it should be something along the lines of:
Pliers, bit driver, mag+lite layer and backspring phillips with traveller scales.That can't possibly be an expensive endeavour :D
-tom -
Hi - am thinking of joining the Cybertool club and buying a Cybertool 29 - I don't really want the extra bulk of the small pliers and scissors on the knife and don't really need these, just the bit driver.
I have a few questions, though:
- I've found somewhere in the UK (where I live) that for an extra £5 can supply the Cybertool with solid red, black, racing green, blue, bright yellow, or pure white scales, in addition to the standard translucent jelly red or sapphire colours - I actually prefer my SAKs in solid colours (or Alox, but that's not an option here) - which do you think would be best to go for? Red is always a classic, but racing green also quite appeals, or even black, though may that's too boring?
See: http://www.swisstool.co.uk/st/CyberTool-29/
-
It's not essential, but how easy would it be to swap out the corkscrew (which I don't like on my SAKs) for the Phillips #2 screwdriver? Would potentially mean I could carry one of the other bits available (e.g. Small hex ir torx) instead of the #2 bit.?
-
How many standard layers thickness is the too relatively? Would it fit in a knife sheath meant for 2-4 layers, for when I want to belt carry it/for storage? Would there also be room to store 2-3 extra bits?
Thanks!
-
- which do you think would be best to go for?
White. 8)
@Oxford_Guy said:
2) It's not essential, but how easy would it be to swap out the corkscrew (which I don't like on my SAKs) for the Phillips #2 screwdriver? Would potentially mean I could carry one of the other bits available (e.g. Small hex ir torx) instead of the #2 bit.?Relatively easy. You'll need to get some 2.2mm or 2.25mm diameter brass rod, and have a read of this: /topic/9808 and this: /topic/44794
@Oxford_Guy said:
3) How many standard layers thickness is the too relatively? Would it fit in a knife sheath meant for 2-4 layers, for when I want to belt carry it/for storage? Would there also be room to store 2-3 extra bits?SAKWiki (http://www.sakwiki.com/tiki-index.php?page=Cybertool) reckons it's 21mm thick - a little more than an Explorer. No idea about if will actually fit into a 2-4 layer sheath - but it probably will.
-
I love this thread. Along with a Swisschamp, the CT is the only SAK on my list to get. I'd probably go for a 29 or more likely 34 as I don't have anything with pliers. They are such a good idea.
Thanks for the great pics everyone.

-
@magentus said:
I love this thread. Along with a Swisschamp, the CT is the only SAK on my list to get. I'd probably go for a 29 or more likely 34 as I don't have anything with pliers. They are such a good idea.Thanks for the great pics everyone.

Get in on the Minimal SAK challenge and you could win a Cybertool 41.

-
-
I love this thread. Along with a Swisschamp, the CT is the only SAK on my list to get. I'd probably go for a 29 or more likely 34 as I don't have anything with pliers. They are such a good idea.
Thanks for the great pics everyone.

Get in on the Minimal SAK challenge and you could win a Cybertool 41.

I'm on it like Graham Bonnet H

Yours is looking sweet as usual

-
- I've found somewhere in the UK (where I live) that for an extra £5 can supply the Cybertool with solid red, black, racing green, blue, bright yellow, or pure white scales, in addition to the standard translucent jelly red or sapphire colours - I actually prefer my SAKs in solid colours (or Alox, but that's not an option here) - which do you think would be best to go for? Red is always a classic, but racing green also quite appeals, or even black, though may that's too boring?
I'd go for green as it's the one colour of scale you can't buy separately.
You may want to check out that seller's Trustpilot reviews: https://uk.trustpilot.com/review/www.swisstool.co.uk
-
@Oxford_Guy said:
Hi - am thinking of joining the Cybertool club and buying a Cybertool 29 - I don't really want the extra bulk of the small pliers and scissors on the knife and don't really need these, just the bit driver.I have a few questions, though:
- I've found somewhere in the UK (where I live) that for an extra £5 can supply the Cybertool with solid red, black, racing green, blue, bright yellow, or pure white scales, in addition to the standard translucent jelly red or sapphire colours - I actually prefer my SAKs in solid colours (or Alox, but that's not an option here) - which do you think would be best to go for? Red is always a classic, but racing green also quite appeals, or even black, though may that's too boring?
See: http://www.swisstool.co.uk/st/CyberTool-29/
-
It's not essential, but how easy would it be to swap out the corkscrew (which I don't like on my SAKs) for the Phillips #2 screwdriver? Would potentially mean I could carry one of the other bits available (e.g. Small hex ir torx) instead of the #2 bit.?
-
How many standard layers thickness is the too relatively? Would it fit in a knife sheath meant for 2-4 layers, for when I want to belt carry it/for storage? Would there also be room to store 2-3 extra bits?
Thanks!
I'd highly recommend Yellow. Hard to lose sight of and mine bring a smile to my face every time I look at them.
-
- I've found somewhere in the UK (where I live) that for an extra £5 can supply the Cybertool with solid red, black, racing green, blue, bright yellow, or pure white scales, in addition to the standard translucent jelly red or sapphire colours - I actually prefer my SAKs in solid colours (or Alox, but that's not an option here) - which do you think would be best to go for? Red is always a classic, but racing green also quite appeals, or even black, though may that's too boring?
I'd go for green as it's the one colour of scale you can't buy separately.
You may want to check out that seller's Trustpilot reviews: https://uk.trustpilot.com/review/www.swisstool.co.uk
Okay, racing green is currently top of my list, though the white does look quite cool and solid red is still a classic look.
The Trustpilot reviews look quite worrying, though I have bough a few bits and pieces off that site before and not had problems. Most of the problems seem to be related to personalisation, though, which I have no interest in.
BTW is it just me or is the hook tool, as featured on the CT 34 and 41, one of the most useless tools ever put on a SAK?
-
- I've found somewhere in the UK (where I live) that for an extra £5 can supply the Cybertool with solid red, black, racing green, blue, bright yellow, or pure white scales, in addition to the standard translucent jelly red or sapphire colours - I actually prefer my SAKs in solid colours (or Alox, but that's not an option here) - which do you think would be best to go for? Red is always a classic, but racing green also quite appeals, or even black, though may that's too boring?
I'd go for green as it's the one colour of scale you can't buy separately.
You may want to check out that seller's Trustpilot reviews: https://uk.trustpilot.com/review/www.swisstool.co.uk
Okay, racing green is currently top of my list, though the white does look quite cool and solid red is still a classic look.
The Trustpilot reviews look quite worrying, though I have bough a few bits and pieces off that site before and not had problems. Most of the problems seem to be related to personalisation, though, which I have no interest in.
BTW is it just me or is the hook tool, as featured on the CT 34 and 41, one of the most useless tools ever put on a SAK?
It is just you :D It regularly tops the '10 most useful SAK tools' in polls.
Seriously though - it casn be very useful in certain circumstances. I found it a briiliant help while building a chicken coop - it's great for retrieving and pulling wire through holes, and for carrying plastic bags.
Also, watch 'Moonrise Kingdom' by Wes Anderson for a novel and tounge-in-cheek use of the hook.
-
BTW how easy would it be to change the scales? Are they glued on or do they just snap on/off?
I don't normally like the translucent scales, but these Silvertech ones look great!: http://swissknifeshop.co.uk/shop/victorinox-scales-for-91mm-swiss-army-knife-genuine-swiss-victorinox-handles/
-
@hiraethus said:
have a read of this: /topic/9808

-
What I'd really love is a Cyber "Solo" - just the bit driver and bit holder layer, as I have better knives I'd rather carry for knife duties - how feasible would that be to Mod? Realistically, for now at least, I'll probably just get the CT 29
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
