CyberTool owners thread
-
I love this thread. Along with a Swisschamp, the CT is the only SAK on my list to get. I'd probably go for a 29 or more likely 34 as I don't have anything with pliers. They are such a good idea.
Thanks for the great pics everyone.

-
@magentus said:
I love this thread. Along with a Swisschamp, the CT is the only SAK on my list to get. I'd probably go for a 29 or more likely 34 as I don't have anything with pliers. They are such a good idea.Thanks for the great pics everyone.

Get in on the Minimal SAK challenge and you could win a Cybertool 41.

-
-
I love this thread. Along with a Swisschamp, the CT is the only SAK on my list to get. I'd probably go for a 29 or more likely 34 as I don't have anything with pliers. They are such a good idea.
Thanks for the great pics everyone.

Get in on the Minimal SAK challenge and you could win a Cybertool 41.

I'm on it like Graham Bonnet H

Yours is looking sweet as usual

-
- I've found somewhere in the UK (where I live) that for an extra £5 can supply the Cybertool with solid red, black, racing green, blue, bright yellow, or pure white scales, in addition to the standard translucent jelly red or sapphire colours - I actually prefer my SAKs in solid colours (or Alox, but that's not an option here) - which do you think would be best to go for? Red is always a classic, but racing green also quite appeals, or even black, though may that's too boring?
I'd go for green as it's the one colour of scale you can't buy separately.
You may want to check out that seller's Trustpilot reviews: https://uk.trustpilot.com/review/www.swisstool.co.uk
-
@Oxford_Guy said:
Hi - am thinking of joining the Cybertool club and buying a Cybertool 29 - I don't really want the extra bulk of the small pliers and scissors on the knife and don't really need these, just the bit driver.I have a few questions, though:
- I've found somewhere in the UK (where I live) that for an extra £5 can supply the Cybertool with solid red, black, racing green, blue, bright yellow, or pure white scales, in addition to the standard translucent jelly red or sapphire colours - I actually prefer my SAKs in solid colours (or Alox, but that's not an option here) - which do you think would be best to go for? Red is always a classic, but racing green also quite appeals, or even black, though may that's too boring?
See: http://www.swisstool.co.uk/st/CyberTool-29/
-
It's not essential, but how easy would it be to swap out the corkscrew (which I don't like on my SAKs) for the Phillips #2 screwdriver? Would potentially mean I could carry one of the other bits available (e.g. Small hex ir torx) instead of the #2 bit.?
-
How many standard layers thickness is the too relatively? Would it fit in a knife sheath meant for 2-4 layers, for when I want to belt carry it/for storage? Would there also be room to store 2-3 extra bits?
Thanks!
I'd highly recommend Yellow. Hard to lose sight of and mine bring a smile to my face every time I look at them.
-
- I've found somewhere in the UK (where I live) that for an extra £5 can supply the Cybertool with solid red, black, racing green, blue, bright yellow, or pure white scales, in addition to the standard translucent jelly red or sapphire colours - I actually prefer my SAKs in solid colours (or Alox, but that's not an option here) - which do you think would be best to go for? Red is always a classic, but racing green also quite appeals, or even black, though may that's too boring?
I'd go for green as it's the one colour of scale you can't buy separately.
You may want to check out that seller's Trustpilot reviews: https://uk.trustpilot.com/review/www.swisstool.co.uk
Okay, racing green is currently top of my list, though the white does look quite cool and solid red is still a classic look.
The Trustpilot reviews look quite worrying, though I have bough a few bits and pieces off that site before and not had problems. Most of the problems seem to be related to personalisation, though, which I have no interest in.
BTW is it just me or is the hook tool, as featured on the CT 34 and 41, one of the most useless tools ever put on a SAK?
-
- I've found somewhere in the UK (where I live) that for an extra £5 can supply the Cybertool with solid red, black, racing green, blue, bright yellow, or pure white scales, in addition to the standard translucent jelly red or sapphire colours - I actually prefer my SAKs in solid colours (or Alox, but that's not an option here) - which do you think would be best to go for? Red is always a classic, but racing green also quite appeals, or even black, though may that's too boring?
I'd go for green as it's the one colour of scale you can't buy separately.
You may want to check out that seller's Trustpilot reviews: https://uk.trustpilot.com/review/www.swisstool.co.uk
Okay, racing green is currently top of my list, though the white does look quite cool and solid red is still a classic look.
The Trustpilot reviews look quite worrying, though I have bough a few bits and pieces off that site before and not had problems. Most of the problems seem to be related to personalisation, though, which I have no interest in.
BTW is it just me or is the hook tool, as featured on the CT 34 and 41, one of the most useless tools ever put on a SAK?
It is just you :D It regularly tops the '10 most useful SAK tools' in polls.
Seriously though - it casn be very useful in certain circumstances. I found it a briiliant help while building a chicken coop - it's great for retrieving and pulling wire through holes, and for carrying plastic bags.
Also, watch 'Moonrise Kingdom' by Wes Anderson for a novel and tounge-in-cheek use of the hook.
-
BTW how easy would it be to change the scales? Are they glued on or do they just snap on/off?
I don't normally like the translucent scales, but these Silvertech ones look great!: http://swissknifeshop.co.uk/shop/victorinox-scales-for-91mm-swiss-army-knife-genuine-swiss-victorinox-handles/
-
@hiraethus said:
have a read of this: /topic/9808

-
What I'd really love is a Cyber "Solo" - just the bit driver and bit holder layer, as I have better knives I'd rather carry for knife duties - how feasible would that be to Mod? Realistically, for now at least, I'll probably just get the CT 29
-
@Oxford_Guy said:
2) It's not essential, but how easy would it be to swap out the corkscrew (which I don't like on my SAKs) for the Phillips #2 screwdriver? Would potentially mean I could carry one of the other bits available (e.g. Small hex ir torx) instead of the #2 bit.?I would advise against this, actually. The the backspring phillips is not a good substitution for the #2 bit. The bit has considerably better grip, better fitment, and better reach.
My scale color preference is black, but I like the translucent red that it comes in just fine.
-
have a read of this: /topic/9808
So the scales should just pop on/off? Will I still be able to access the pen and pin with aftermarket scales?

-
Yes, they'll just pop off. It's a bit easier and you're less likely to damage them if you warm the knife gently first.
As long as you get plus scales then you can fit the pen. The pin hole has been on all recent non-plus scales I've seen lately. Though it depends what you mean by aftermarket - there are scales made by companies other than Victorinox out there.
-
@hiraethus said:
Yes, they'll just pop off. It's a bit easier and you're less likely to damage them if you warm the knife gently first.As long as you get plus scales then you can fit the pen. The pin hole has been on all recent non-plus scales I've seen lately. Though it depends what you mean by aftermarket - there are scales made by companies other than Victorinox out there.
Thanks. Do you mean to warm the whole of the knife you're taking the scales off, or just the blade of the knife you're using to pop-off the scales?
-
The whole knife. It softens the plastic scales a little.
-
@hiraethus said:
The whole knife. It softens the plastic scales a little.Okay, thanks
-
@Oxford_Guy said:
What I'd really love is a Cyber "Solo" - just the bit driver and bit holder layer, as I have better knives I'd rather carry for knife duties - how feasible would that be to Mod? Realistically, for now at least, I'll probably just get the CT 29It would be dreamy except I cant see how the bit driver layer can accomodate a corkscrew/phillips and this would leave an unsightly gap in the rear scale.

-
BTW does the bit driver on the Cybertool have a proper half-stop (semi-lock) at the 90 degree position, like the bottle opener tool? It's not clear from the description on SAKWiki: http://www.sakwiki.com/tiki-index.php?page=Bit+Driver
It just says "The driver is designed for use in the fully open or fully extended position, as well as in the 90deg position where it forms a right-angle with the knife handle.", but I don't know whether that means there is a proper half stop at 90 degrees
-
Yes, it has a half-stop.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
