CyberTool owners thread
-
What I'd really love is a Cyber "Solo" - just the bit driver and bit holder layer, as I have better knives I'd rather carry for knife duties - how feasible would that be to Mod? Realistically, for now at least, I'll probably just get the CT 29
-
@Oxford_Guy said:
2) It's not essential, but how easy would it be to swap out the corkscrew (which I don't like on my SAKs) for the Phillips #2 screwdriver? Would potentially mean I could carry one of the other bits available (e.g. Small hex ir torx) instead of the #2 bit.?I would advise against this, actually. The the backspring phillips is not a good substitution for the #2 bit. The bit has considerably better grip, better fitment, and better reach.
My scale color preference is black, but I like the translucent red that it comes in just fine.
-
have a read of this: /topic/9808
So the scales should just pop on/off? Will I still be able to access the pen and pin with aftermarket scales?

-
Yes, they'll just pop off. It's a bit easier and you're less likely to damage them if you warm the knife gently first.
As long as you get plus scales then you can fit the pen. The pin hole has been on all recent non-plus scales I've seen lately. Though it depends what you mean by aftermarket - there are scales made by companies other than Victorinox out there.
-
@hiraethus said:
Yes, they'll just pop off. It's a bit easier and you're less likely to damage them if you warm the knife gently first.As long as you get plus scales then you can fit the pen. The pin hole has been on all recent non-plus scales I've seen lately. Though it depends what you mean by aftermarket - there are scales made by companies other than Victorinox out there.
Thanks. Do you mean to warm the whole of the knife you're taking the scales off, or just the blade of the knife you're using to pop-off the scales?
-
The whole knife. It softens the plastic scales a little.
-
@hiraethus said:
The whole knife. It softens the plastic scales a little.Okay, thanks
-
@Oxford_Guy said:
What I'd really love is a Cyber "Solo" - just the bit driver and bit holder layer, as I have better knives I'd rather carry for knife duties - how feasible would that be to Mod? Realistically, for now at least, I'll probably just get the CT 29It would be dreamy except I cant see how the bit driver layer can accomodate a corkscrew/phillips and this would leave an unsightly gap in the rear scale.

-
BTW does the bit driver on the Cybertool have a proper half-stop (semi-lock) at the 90 degree position, like the bottle opener tool? It's not clear from the description on SAKWiki: http://www.sakwiki.com/tiki-index.php?page=Bit+Driver
It just says "The driver is designed for use in the fully open or fully extended position, as well as in the 90deg position where it forms a right-angle with the knife handle.", but I don't know whether that means there is a proper half stop at 90 degrees
-
Yes, it has a half-stop.
-
@hiraethus said:
I don't think I've posted my latest SAK in this thread:

Nice Hi
The scales make it seem so much fancier 
-
Nice Hi
The scales make it seem so much fancier 
Where did you get those scales from, they look different from the "pure white" scales I found here: http://www.swisstool.co.uk/st/CyberTool-29/
The cross looks different for a start, see examples here: http://www.swisstool.co.uk/st/spartan-white-swiss-army-knife/
-
-
@Oxford_Guy said:
Where did you get those scales from, they look different from the "pure white" scales I found here: http://www.swisstool.co.uk/st/CyberTool-29/The cross looks different for a start, see examples here: http://www.swisstool.co.uk/st/spartan-white-swiss-army-knife/
They were a gift from a member in the US - but as far as I can tell they're totally standard white plus scales with the same cross as all my other SAKs.
-
Where did you get those scales from, they look different from the "pure white" scales I found here: http://www.swisstool.co.uk/st/CyberTool-29/
The cross looks different for a start, see examples here: http://www.swisstool.co.uk/st/spartan-white-swiss-army-knife/
They were a gift from a member in the US - but as far as I can tell they're totally standard white plus scales with the same cross as all my other SAKs.
With fanciness added by fairies I assume

:D
-
New page banana man dance

-
Think I may actually just get the Cybertool 29 in jelly red, then changes the scales later, as can't decide on white, solid red or black currently (or maybe even something fancy like titanium).
-
BTW I'd like to pick up some of the other bit sizes that don't come with the Cybertool, i.e. those from the Swisschamp XLT.
i.e.
Torx 6
Torx 8Hex 1,2 mm
Hex 1,5 mmHex 2 mm
Hex 2,5 mmNowhere seems to have these ones, though:
Bit Slotted 3x1
Bit Slotted 4x1There's a couple of places in Europe that sell at least some of these bits:
http://www.pizzini.at/shop/cybertool/p-356.html (have all but the slotted 3mm/4mm, which seem impossible to get)
They also do 91mm Plus scales (and others) for 3 € each: http://www.pizzini.at/shop/victorinox-replacement-scales/p-385.html
http://mymesser.de/epages/b0f75a5e-95dd-4ff4-b13b-9297fc27413d.sf/en_GB/?ViewObjectPath=%2FShops%2Fb0f75a5e-95dd-4ff4-b13b-9297fc27413d%2FProducts%2FA.7680.34&ViewAction=ViewAccessory (they don't seem to have the Hex 2 mm/Hex 2,5 mm, though, nor the slotted ones above)
The problem is, though, that both places charge about 15 € minimum postage...
Would anyone here that's fancy a group buy for bits and/or scales? I'd be happy to organise and we can split the postage costs and would charge cost for any forwarding-on postage, though may not be worth it for those outside of Europe.
-
BTW seems strange there are two bits that have the Torx 8 (T8 / 4mm hex and T8/T6) but no Torx 7 bit - what were Victorinox thinking?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Much prefer them to the translucent blue that it was fitted with.