Leatherman's Knives
-
Hi All,
I've got about 20 of the Leatherman knives in my collection. The one that I like the best is the E306X.
Like Tom, I do think Leatherman has a home run on their hands. In the past few months I've seen more models showing up in various shops.
I really like the blade launcher. It takes a little bit of playing with it to get the technique down.
In the hunting knife line, I only have the Klamath thus far. It is a big knife. I was in Seattle last week and visited a knife shop which let me handle the Steens (the "fixed" blade). I suspect that will be my next Leatherman knife.
Best - Joe
-
I've been thinking about getting one myself; either the e302/303 or the e304/305...the ones withh the dedicated drivers. What is the diffrence between the two besides one having a skeletonized handle?
Are these models really thick? I can't picture how it all folds into the handle...
My Gerber pocket knife is lame, and Leatherman seems to be outshining them in the affordable/beater pocket knives dept...
-
I only have one, the e301 and I don't carry or use it terribly often. It's a nice knife, and I am impressed by the quality of it, especially for the price. I just don't carry it because I am at the point now where I don't see the point of a dedicated knife. After carrying SAKs and multitools for so long, a knife with nothing else seems like a waste of space.
That having been said, I plan to get one of the bigger, better outfitted models soon.
Def
-
Hi Corrugated,
Both the e302/303 and the e304x/e305x knives are good ones. As to differences, here gfoes:
-
e302/304 - have blade, carabiner/bottle opener, phillips & medium screwdrivers. Blade is 420 SS. Weight = 3.9 oz/111 gms.,
-
e304x/305x - have blade & carabiner/bottle opener. Blade is 154CM. Weight = 3.0 oz/84 gms.
You need to decide on the two screwdrivers additional with the e302/303. The "fight" about 420 versus 154CM will never end. I've found that 154CM seems to hold an edge longer than 420, but is harder to resharpen. However, with a Spyderco Sharpmaker, it is no big deal.
Best - Joe
PS - I like the looks of the e304x/305x over the e302/303.
-
-
Just so everyone knows what we're talking about.
Even numbers are PE, odds are PE/SE combos.
e's & c's are 3.9" closed
k's & h's are 4.5" closede300/e301

e302/e303

e304x/e305x

e306x/e307x

c300/c301

c302/c303

c304/c305

k500x/k501x

k502x/k503x

h500/h501

h502/h503

[edited to correct length of e & c to 3.9" & k & h to 4.5"]
-
I personally like the c304 because it has dedicated implements, rubber inserts on the handle, & a nice thumb rest on the back of the blade that the "e" series doesn't have.
Tom
-
I think the k502 is the one I am hoping to get soon.
Def
-
Def,
The "k" series is really nice, but really big!
I'll post the hunting knives too. Let me go find them.
Tom
-
I think that is the one that another forum member has that I am trying to get from him- that's why it's the one I am hoping to get next!
If all else fails though I may have to break down and buy one...
Def
-
I was talking to someone at Leatherman a little while ago and those came up in conversation. I have to say, they just don't have any appeal for me at all... they remind me of the Revolver knife from SOG, which I also don't care for. But then, that's just me. They sell well enough, so I guess someone has to like them.
Def
-
Def,
You mean the hunting knives?
Tom
-
Yup.
But then I haven't been hunting in years, so maybe that's why a good hunting knife doesn't do much for me.
Def
-
Thanks for the pictures Tom. (I've been too lazy to go to the Leatherman site myself and look at them. :P)
I finally "understand" the differences between all the different models. Boy, there certainly are a lot of them!
-
What's with the names?
-
@Bison56 said:
Now that the knives have been out for a while,has anybody used theirs enough to say how well they do the job? Did Leatherman hit a home run,or lay down a bunt? What improvements would you suggest to the company?I have a few of the LM folders:
e302 (smaller size, 420 blade, liner lock, phillips + flat drivers),
e306X (smaller size, 154CM blade, liner lock, aluminum frame, bit holder + three double-ended bits), and
h502 (larger size, 420 blade, lockback, bit holder + three double-ended bits).They're all well made, and work well; the 420 blade steel isn't bad at all, more like Buck 420HC than cheapy chinese 420. The extra implements are well done, but a few are difficult to deploy with gloves on (or with no fingernails!) due to smallish studs/tabs. One can argue the wisdom of the bit holders and their potentially misplaced bits, but if you feel strongly about it, there are models with non-removeable drivers.
The Blade Launcher feature is OK, I guess; I find it easier to flick the blade out with my index finger on the thumbstud, like most of my knives. Since the blades aren't all that massive, and since the pivots aren't real loose, it takes a good solid "pop"of the Blade Launcher to fully deploy the blade.
I know a lot of folks don't care for liner locks, but on both of mine, the lock-up is solid and secure. The other is a lockback, which is also well executed. Most of the implements don't lock open, but have a VERY solid detent; you'd have to try pretty hard to get one to fold up on you. The carabiner clips do lock, though; while I tend to prefer a good ol' pocket clip, the LM 'biner clips work well, and since they're hollow and fit around the tip of the knife blades, actually don't add any bulk to the knives.
Speaking of bulk... NONE of these knives are what you'd call "slim". The extra implements and thick scales make them quite chunky; the thickest have handles about as thick as they are deep, which feels odd when you're used to single-bladed tactical knives, but not at all uncomfortable. While a tad bulky, they're not inordinately heavy; the overall impression is "solid".
Overall, I think they're winners. My only concern is the price: they aren't exactly cheap, and in a world where most non-knife-knuts are perfectly happy with the "buck knives" they buy for a buck at the gas station, I don't see them taking over the world anytime soon. But for the more discerning knut, especially one who likes to pack a screwdriver or two in addition to a knife, they're definitely worth a look.
-
Could someone snap a pic of a c304/c305s' width next to a SAK or something similar? There's a c305 on ebay for $30 shipped I might get (even though I didn't want serrations... :( )
-
I didn't know what kind of SAk you wanted so here is my c301 (should be the same size) next to a Compact and an OHT.
Def
-
I like the smaller liner lock LM knives. I have been carrying the C305 for a while now and have no problems with it. I like the blade launcher and the carabiner/bottler opener works good. I have a bigger lockback h502 but really haven't carried it very much.
.jpg)
.jpg)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





