Leatherman's Knives
-
Just so everyone knows what we're talking about.
Even numbers are PE, odds are PE/SE combos.
e's & c's are 3.9" closed
k's & h's are 4.5" closede300/e301

e302/e303

e304x/e305x

e306x/e307x

c300/c301

c302/c303

c304/c305

k500x/k501x

k502x/k503x

h500/h501

h502/h503

[edited to correct length of e & c to 3.9" & k & h to 4.5"]
-
I personally like the c304 because it has dedicated implements, rubber inserts on the handle, & a nice thumb rest on the back of the blade that the "e" series doesn't have.
Tom
-
I think the k502 is the one I am hoping to get soon.
Def
-
Def,
The "k" series is really nice, but really big!
I'll post the hunting knives too. Let me go find them.
Tom
-
I think that is the one that another forum member has that I am trying to get from him- that's why it's the one I am hoping to get next!
If all else fails though I may have to break down and buy one...
Def
-
I was talking to someone at Leatherman a little while ago and those came up in conversation. I have to say, they just don't have any appeal for me at all... they remind me of the Revolver knife from SOG, which I also don't care for. But then, that's just me. They sell well enough, so I guess someone has to like them.
Def
-
Def,
You mean the hunting knives?
Tom
-
Yup.
But then I haven't been hunting in years, so maybe that's why a good hunting knife doesn't do much for me.
Def
-
Thanks for the pictures Tom. (I've been too lazy to go to the Leatherman site myself and look at them. :P)
I finally "understand" the differences between all the different models. Boy, there certainly are a lot of them!
-
What's with the names?
-
@Bison56 said:
Now that the knives have been out for a while,has anybody used theirs enough to say how well they do the job? Did Leatherman hit a home run,or lay down a bunt? What improvements would you suggest to the company?I have a few of the LM folders:
e302 (smaller size, 420 blade, liner lock, phillips + flat drivers),
e306X (smaller size, 154CM blade, liner lock, aluminum frame, bit holder + three double-ended bits), and
h502 (larger size, 420 blade, lockback, bit holder + three double-ended bits).They're all well made, and work well; the 420 blade steel isn't bad at all, more like Buck 420HC than cheapy chinese 420. The extra implements are well done, but a few are difficult to deploy with gloves on (or with no fingernails!) due to smallish studs/tabs. One can argue the wisdom of the bit holders and their potentially misplaced bits, but if you feel strongly about it, there are models with non-removeable drivers.
The Blade Launcher feature is OK, I guess; I find it easier to flick the blade out with my index finger on the thumbstud, like most of my knives. Since the blades aren't all that massive, and since the pivots aren't real loose, it takes a good solid "pop"of the Blade Launcher to fully deploy the blade.
I know a lot of folks don't care for liner locks, but on both of mine, the lock-up is solid and secure. The other is a lockback, which is also well executed. Most of the implements don't lock open, but have a VERY solid detent; you'd have to try pretty hard to get one to fold up on you. The carabiner clips do lock, though; while I tend to prefer a good ol' pocket clip, the LM 'biner clips work well, and since they're hollow and fit around the tip of the knife blades, actually don't add any bulk to the knives.
Speaking of bulk... NONE of these knives are what you'd call "slim". The extra implements and thick scales make them quite chunky; the thickest have handles about as thick as they are deep, which feels odd when you're used to single-bladed tactical knives, but not at all uncomfortable. While a tad bulky, they're not inordinately heavy; the overall impression is "solid".
Overall, I think they're winners. My only concern is the price: they aren't exactly cheap, and in a world where most non-knife-knuts are perfectly happy with the "buck knives" they buy for a buck at the gas station, I don't see them taking over the world anytime soon. But for the more discerning knut, especially one who likes to pack a screwdriver or two in addition to a knife, they're definitely worth a look.
-
Could someone snap a pic of a c304/c305s' width next to a SAK or something similar? There's a c305 on ebay for $30 shipped I might get (even though I didn't want serrations... :( )
-
I didn't know what kind of SAk you wanted so here is my c301 (should be the same size) next to a Compact and an OHT.
Def
-
I like the smaller liner lock LM knives. I have been carrying the C305 for a while now and have no problems with it. I like the blade launcher and the carabiner/bottler opener works good. I have a bigger lockback h502 but really haven't carried it very much.
.jpg)
.jpg)
-
The spring of 2006 when the first of the Leatherman knives came out I bought 1 of the K502x and 3 of the K500x. These are the 154cm knives.
I own a Lawn/Landscape company and I use knives very hard most days. I can end up cutting carpet or water hoses wrapped into a bushhog or under mower decks, heavy duty comm'l trimmer line with Kevlar, seed bags, and just about anything else in the great outdoors.
I carried the K502x everyday last year and for a few months this year. It is an absolute workhorse. I love the 154cm on these knives. They hold an edge very well and stay very sharp. The tools work well. This is a VERY solid workman style knife. I give it a very high rating.
I bought 3 of the K500x knives. I gave one to my partner last year. He carries it every day and uses it hard. He makes the statement often that he loves it more now than before and he's had it for a year. About 2 months ago I started carrying mine daily and left the K502x at home. The ONLY reason is that I really used my SAK mechanic more than the tools on the K502x because of the pliers on the mechanic. So I decided to use the K500x to see if I would be happy with it rather than the much thicker K502x. The K500x is the exact blade but without the added thickness of the other tools. Its actually very very thin and rides unnoticed clipped in my front pocket. So far, it has been flawless and I don't feel under knifed by it. It too is a VERY solid workman style knife without all the other tools.
My 13 year old daughter will be working for me this summer. She has already asked for the other K500x I have still in the box. I told her that its her's. Seemed to make her very happy.
To wrap it up, if you are looking for a heavy duty work knife with an excellent blade, I give a HUGE thumbs up to the K series Leatherman knives.
-
Glad to see you made it here Hoss!
I recently sold my LM knife and I have to say that I am really missing it. For the price, it is a very good little knife, and I am looking forward to trying out the 500 series.
I've had alot of bigger deddicated knives from serious knife companies that cost alot more than the little one I just sold and they really aren't significantly better. Not enough to justify almost ten times the cost anyway.
Def
-
@Defender said:
I only have one, the e301 and I don't carry or use it terribly often. It's a nice knife, and I am impressed by the quality of it, especially for the price. I just don't carry it because I am at the point now where I don't see the point of a dedicated knife. After carrying SAKs and multitools for so long, a knife with nothing else seems like a waste of space.That having been said, I plan to get one of the bigger, better outfitted models soon.
Def
same here def, apart from fixed blades all my ''pocket knives'' are saks or multi tools
they do look the part though

-
back when I had a LM surge I was getting real tempted to buy the klamath LM knife, the thought of the gut hook and S30V blade were very tempting, knife looks beautiful aswell.
However, I was held back by the fact that such a knife is very illegal in the UK (4 inch locking blade :o), and I dislike the idea of carrying two tools, I prefer one all in one multitool (why I probably will not buy a leatherman freestyle and pair it with a SAK, even thought I am real tempted).
So I firgured I could solve my problems by getting the new leatherman TTI, since it had the special steel knife, and a cutting hook, and brought me back to a one tool solution.
I dont believe I regret my decision, even getting the sec3d version from cabelas (which looks stunning) I think it worked out cheaper than buying a separate klamath (since I sold my surge).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





