What do you HATE about multitools?
-
I hate not having them all...

-
Not offering non-locking knife options for multitools which have locking tools (which I still want) - for countries like UK, France, Denmark and some other countries where it's not legal to carry a locking knife. Or even just more options for multitools with no knife, as I don't mind carrying a separate one.
I'm okay for now as have a Leatherman Knifeless Fuse, but other options would have been nice, especially for the Victorinox Swisstools
-
Not being SAKs. I mean, they don't have the SAK layered engineering (Juice excluded) and the SAK ultra low tolerances (Swisstool excluded) and the SAK pocketability (Spirit excluded) and the SAK choice of tools (pruner and such rare tools).
I mostly like the Juice and Spirit because they resemble SAKs. If Juice was made by Victorinox, with the same tools but in their Swiss time tested format (keeping a diamond side on the file) it would be my No 1 multitool.
Spirit is made by Victorinox and it has SAK tools but also locking, with a better reach and some are redesigned to be better (like the prying bottle opener). I only dream of a "Spirit Companion", having all Victorinox tools found on XLT (or XAVT, why not?) which aren't already included in the Spirit, starting from a proper 91mm pair of scissors. That would be a killer combination. -
- Wasted space - Like in most Chinese cheapos, some Gerbers and SOGs. Foolow Victorinox or early LM's example for God's sake!
- Locks - I hate bad locking systems (like those on the Powerplay or the Gerber MP800) that are a pain to use and hard to reach. I dislike wiggly locking clips (hey, Surge, that's for you) or wrongly placed clips (Wingman? Wave? Why the hell would you put the clip on that side?)
- Fish scalers - mostly on Chinese MTs and cheapos, they don't even work as they were meant to, and only 5% of the people that buy MTs will have a real use for them
- Non cutting saws - On chep MTs and knockoffs, saws that just don't cut at all and are made just for looks
- Files - bad and cheap, completely rubbish garbage on most $3 tools that won't file anything and have such a crap patters/aggresiveness
- Bad scissors - same as the two above, also included bad rounded Phillips driver
- Overabundance of flat drivers (sometimes even 4 in one tool)
- Parts that can get lost easily - SOG's adapter's spring, SOG's scissor spring, Leatherman's bit drivers, etc.
I could probably say a lot more, but these are the mones that come to mind immediately
-
Leatherman/Gerber/SOG prices in countries other than the USA
-
I don't hate anything about MTs, but . . .
- for me the can opener is a waste of space; I have never used one
- for my purposes, only Victorinox scissors are adequately precise
- yeah, inside opening tools are sub-optimal; slow to deploy, and make for an ouchy plier experience when gripping the tools
- short, stubby drivers like you find on the Wave, etc. don't have any reach and are not groovy
These are the reasons that the Swisstool Spirit is probably my favorite EDC MT. But I still love them all and could get by just fine with almost any of them.
-
Just took a Surge, a OHT and a Mut apart. Those 3 tools have 6 sizes outside tool, so no shuffling of the tools.
Surge, 1 size outside tools
OHT, 2 sizes of outside tools
MUT, 3 sizes of outside tools (the smaller tools have different inside diameter).I love the hammer of the Mut, but I because of that (and the fact that the smaller outside tools are non-locking), I cannot customize in a way that it becomes useful to me.
-
I have the Charge TTi. It goes for 299 € here (!!!). What do I get for that amount of money that I like? A nice OHO clip point blade (SV30, not that I needed that), an OHO serrated blade with hook and a diamond file. All the rest tools are inferior to those a SAK or a Swisstool has (according to my use/needs). No owl and an excuse of a pair of scissors (Surge does better with both). Why would I want to pay 300 for these (I didn't I bought preowned for around half that amount)? Leatherman could sell a double blade knife with the same blades that would be lighter, cheaper and more ergonomic and would complement nicely a multitool with all the rest and not OHO blades. Any, from a knifeless Fuse to a new multitool that would add a Surge like pair of scisors and an OHO bit driver with extension built in, or a really nice awl in place of the blades. They will not do it.
-
That they retire the good ones.
-
@kkokkolis said:
I have the Charge TTi. It goes for 299 € here (!!!). What do I get for that amount of money that I like? A nice OHO clip point blade (SV30, not that I needed that), an OHO serrated blade with hook and a diamond file. All the rest tools are inferior to those a SAK or a Swisstool has (according to my use/needs). No owl and an excuse of a pair of scissors (Surge does better with both). Why would I want to pay 300 for these (I didn't I bought preowned for around half that amount)? Leatherman could sell a double blade knife with the same blades that would be lighter, cheaper and more ergonomic and would complement nicely a multitool with all the rest and not OHO blades. Any, from a knifeless Fuse to a new multitool that would add a Surge like pair of scisors and an OHO bit driver with extension built in, or a really nice awl in place of the blades. They will not do it.Respectfully I disagree.
I love SAK scissors but the Charge scissors are in no way an excuse for scissors.
Charge costs for much the same reason Syphs custom SAKs do, titanium scales. -
They are not bad, but they are almost Vic Classic size, very small for the size of the tool. And not very ready to be used (on the inside and need to be deployed after opening). Leatherman has bigger scissors on Surge, Juice, Squirt and Micra, I compare them to these.
I would prefer an awl and use a Squirt S4 or a Pioneer X separately. I had the same problem with Spirit scissors. -
@ironraven said:
That they retire the good ones.I
that mindset. Forgot to mention it, I really hate the "discontinuing" of the best models, both knives and Multitools, like these champs:



-
I understand why companies discontinue certain products, so thus I blame the consumers for not properly consuming :ahhh :ahhh :ahhh
I like, carry and use my LM KF4 a lot and managed to score a backup in case of loss. I do wonder though, if something were to break on it, would LM be willing to repair it and charge accordingly? There is nothing proprietary about it (other than possibly the yellow scales) and all of the parts are currently being made for the XE6. Hopefully I will never have to find out

-
Speaking to SAK fans: Does anybody really Need a cork screw as an edc? Other than a micro screw holder, WHY?
-
@JBW1 said:
Speaking to SAK fans: Does anybody really Need a cork screw as an edc? Other than a micro screw holder, WHY?In France most wine still comes with a regular cork, whenever I go to France (which is quite often, as my wife is French), I always make sure I have a knife with a corkscrew on it. As for whether you need it for an EDC, I guess that depends how often you think it's likely you'll need to open an impromptu bottle...
-
I hate when a tool is made bigger than it has to be: comparing Charge to Wave, no added functions, but added bulk. Yes, Wave is not very comfortable in hand because it has many sharp edges, but that can be address but manually soften them up with file and sandpaper. (Leatherman should have done that instead of the users
) -
Hate? Not much. They're mostly great. :) I dislike the ubiquity of bottle openers and the proliferation of poor quality one-piece tools but other than that find it hard to get worked up about what is essentially a luxury item.
-
- The bulkiness to use the blade. A good knife will be better always.
- Unproperly action of tools (scissors, drivers)
- Weight
- Lack of small and medium Victorinox multitools
-
I hate LM because when I'm firmly pressing pliers my hand slipping forward because arms are straight. It should be arched, like in regular pliers.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login