What do you HATE about multitools?
-
Leatherman/Gerber/SOG prices in countries other than the USA
-
I don't hate anything about MTs, but . . .
- for me the can opener is a waste of space; I have never used one
- for my purposes, only Victorinox scissors are adequately precise
- yeah, inside opening tools are sub-optimal; slow to deploy, and make for an ouchy plier experience when gripping the tools
- short, stubby drivers like you find on the Wave, etc. don't have any reach and are not groovy
These are the reasons that the Swisstool Spirit is probably my favorite EDC MT. But I still love them all and could get by just fine with almost any of them.
-
Just took a Surge, a OHT and a Mut apart. Those 3 tools have 6 sizes outside tool, so no shuffling of the tools.
Surge, 1 size outside tools
OHT, 2 sizes of outside tools
MUT, 3 sizes of outside tools (the smaller tools have different inside diameter).I love the hammer of the Mut, but I because of that (and the fact that the smaller outside tools are non-locking), I cannot customize in a way that it becomes useful to me.
-
I have the Charge TTi. It goes for 299 € here (!!!). What do I get for that amount of money that I like? A nice OHO clip point blade (SV30, not that I needed that), an OHO serrated blade with hook and a diamond file. All the rest tools are inferior to those a SAK or a Swisstool has (according to my use/needs). No owl and an excuse of a pair of scissors (Surge does better with both). Why would I want to pay 300 for these (I didn't I bought preowned for around half that amount)? Leatherman could sell a double blade knife with the same blades that would be lighter, cheaper and more ergonomic and would complement nicely a multitool with all the rest and not OHO blades. Any, from a knifeless Fuse to a new multitool that would add a Surge like pair of scisors and an OHO bit driver with extension built in, or a really nice awl in place of the blades. They will not do it.
-
That they retire the good ones.
-
@kkokkolis said:
I have the Charge TTi. It goes for 299 € here (!!!). What do I get for that amount of money that I like? A nice OHO clip point blade (SV30, not that I needed that), an OHO serrated blade with hook and a diamond file. All the rest tools are inferior to those a SAK or a Swisstool has (according to my use/needs). No owl and an excuse of a pair of scissors (Surge does better with both). Why would I want to pay 300 for these (I didn't I bought preowned for around half that amount)? Leatherman could sell a double blade knife with the same blades that would be lighter, cheaper and more ergonomic and would complement nicely a multitool with all the rest and not OHO blades. Any, from a knifeless Fuse to a new multitool that would add a Surge like pair of scisors and an OHO bit driver with extension built in, or a really nice awl in place of the blades. They will not do it.Respectfully I disagree.
I love SAK scissors but the Charge scissors are in no way an excuse for scissors.
Charge costs for much the same reason Syphs custom SAKs do, titanium scales. -
They are not bad, but they are almost Vic Classic size, very small for the size of the tool. And not very ready to be used (on the inside and need to be deployed after opening). Leatherman has bigger scissors on Surge, Juice, Squirt and Micra, I compare them to these.
I would prefer an awl and use a Squirt S4 or a Pioneer X separately. I had the same problem with Spirit scissors. -
@ironraven said:
That they retire the good ones.I
that mindset. Forgot to mention it, I really hate the "discontinuing" of the best models, both knives and Multitools, like these champs:



-
I understand why companies discontinue certain products, so thus I blame the consumers for not properly consuming :ahhh :ahhh :ahhh
I like, carry and use my LM KF4 a lot and managed to score a backup in case of loss. I do wonder though, if something were to break on it, would LM be willing to repair it and charge accordingly? There is nothing proprietary about it (other than possibly the yellow scales) and all of the parts are currently being made for the XE6. Hopefully I will never have to find out

-
Speaking to SAK fans: Does anybody really Need a cork screw as an edc? Other than a micro screw holder, WHY?
-
@JBW1 said:
Speaking to SAK fans: Does anybody really Need a cork screw as an edc? Other than a micro screw holder, WHY?In France most wine still comes with a regular cork, whenever I go to France (which is quite often, as my wife is French), I always make sure I have a knife with a corkscrew on it. As for whether you need it for an EDC, I guess that depends how often you think it's likely you'll need to open an impromptu bottle...
-
I hate when a tool is made bigger than it has to be: comparing Charge to Wave, no added functions, but added bulk. Yes, Wave is not very comfortable in hand because it has many sharp edges, but that can be address but manually soften them up with file and sandpaper. (Leatherman should have done that instead of the users
) -
Hate? Not much. They're mostly great. :) I dislike the ubiquity of bottle openers and the proliferation of poor quality one-piece tools but other than that find it hard to get worked up about what is essentially a luxury item.
-
- The bulkiness to use the blade. A good knife will be better always.
- Unproperly action of tools (scissors, drivers)
- Weight
- Lack of small and medium Victorinox multitools
-
I hate LM because when I'm firmly pressing pliers my hand slipping forward because arms are straight. It should be arched, like in regular pliers.

-
@IvanDrago said:
I hate LM because when I'm firmly pressing pliers my hand slipping forward because arms are straight. It should be arched, like in regular pliers.

Seems like you're not the only one thinking that... :D

I just had to post this, since I guess nobody expected to see that MT in this thread. :D
-
I hate LM because when I'm firmly pressing pliers my hand slipping forward because arms are straight. It should be arched, like in regular pliers.

Seems like you're not the only one thinking that... :D

I just had to post this, since I guess nobody expected to see that MT in this thread. :D
You're right. It's a "I hate" thread, no way a Vic would have been mentioned here if not for your post.

-
-
Wasted space. Case in point: SOG PPP's washers. Why? Could nothing else fit in there? A small flathead, or maybe a Phillips head with a thicker shaft?
Flatheads are also a plague, especially in cheapos, or some early models, like the OG Wave, or SideClip. Victorinox has solved this, with flathead tips on other implements. -
Poor design choices. SOG's PowerLock handle covers are terrible. The implements are already on the inside, no reason to add an additional step to deploy them. Roll the handle edges to improve comfort.
This would also include multi-tools that were designed by people who have never used one, not even the one they made. I'm looking at you, Camillus Les Stroud Engage MT. -
Lack of pocket clips. This is a common mod people do, due to a lot of models not having it, like the Rebar, Spirit, SAKs, and others. Why are there no pocket-clip scales for 91mm models?
-
Poor quality control. It's fairly accepted that QC has somewhat slipped in recent years. More and more LM and Vic models show up with issues, minor ones usually, but issues nonetheless.
-
Reluctance to go a step further. LM has the staple two blades for a while now. Why not broaden the spectrum, and offer the standard LM plain edge blade, along with a curved, serrated blade? Or a utility blade holder?
Victorinox seems to offer a new model every century. And even then, it's just minor tweaks. Take a look at the SAK mods. If new models are just limited to different arrangements of the existing implements, then shake it up a bit. Add a serrated blade on a Farmer, along with a small one, or whatever. Put plus scales in all models (there already are plus scales for 111mm models, why are they exclusive to Garant?), or, better yet, allow us to choose the color and side tools, when ordering a SAK, just as if we were choosing which color and length of paracord we are ordering. Scissors on 111mm liner-locks, file/pliers on 93mm models, alox/G10/Ti for 91mm models, awls on 58mm models. There is plenty of room for new features. -
Poor quality implements. Lousy attempts at scissors. This explains the lack of scissors on cheap models, and cheap brands. Two blades, a spring, and the ability to cut effectively, while still being able to fold the entire thing into the handle is a bit tricky to pull off. Reamers, Phillips drivers, blade shapes, OHO systems, there's always something off.
-
-
Outburst of anger :ahhh But I'm with you

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login