What do you HATE about multitools?
-
- The bulkiness to use the blade. A good knife will be better always.
- Unproperly action of tools (scissors, drivers)
- Weight
- Lack of small and medium Victorinox multitools
-
I hate LM because when I'm firmly pressing pliers my hand slipping forward because arms are straight. It should be arched, like in regular pliers.

-
@IvanDrago said:
I hate LM because when I'm firmly pressing pliers my hand slipping forward because arms are straight. It should be arched, like in regular pliers.

Seems like you're not the only one thinking that... :D

I just had to post this, since I guess nobody expected to see that MT in this thread. :D
-
I hate LM because when I'm firmly pressing pliers my hand slipping forward because arms are straight. It should be arched, like in regular pliers.

Seems like you're not the only one thinking that... :D

I just had to post this, since I guess nobody expected to see that MT in this thread. :D
You're right. It's a "I hate" thread, no way a Vic would have been mentioned here if not for your post.

-
-
Wasted space. Case in point: SOG PPP's washers. Why? Could nothing else fit in there? A small flathead, or maybe a Phillips head with a thicker shaft?
Flatheads are also a plague, especially in cheapos, or some early models, like the OG Wave, or SideClip. Victorinox has solved this, with flathead tips on other implements. -
Poor design choices. SOG's PowerLock handle covers are terrible. The implements are already on the inside, no reason to add an additional step to deploy them. Roll the handle edges to improve comfort.
This would also include multi-tools that were designed by people who have never used one, not even the one they made. I'm looking at you, Camillus Les Stroud Engage MT. -
Lack of pocket clips. This is a common mod people do, due to a lot of models not having it, like the Rebar, Spirit, SAKs, and others. Why are there no pocket-clip scales for 91mm models?
-
Poor quality control. It's fairly accepted that QC has somewhat slipped in recent years. More and more LM and Vic models show up with issues, minor ones usually, but issues nonetheless.
-
Reluctance to go a step further. LM has the staple two blades for a while now. Why not broaden the spectrum, and offer the standard LM plain edge blade, along with a curved, serrated blade? Or a utility blade holder?
Victorinox seems to offer a new model every century. And even then, it's just minor tweaks. Take a look at the SAK mods. If new models are just limited to different arrangements of the existing implements, then shake it up a bit. Add a serrated blade on a Farmer, along with a small one, or whatever. Put plus scales in all models (there already are plus scales for 111mm models, why are they exclusive to Garant?), or, better yet, allow us to choose the color and side tools, when ordering a SAK, just as if we were choosing which color and length of paracord we are ordering. Scissors on 111mm liner-locks, file/pliers on 93mm models, alox/G10/Ti for 91mm models, awls on 58mm models. There is plenty of room for new features. -
Poor quality implements. Lousy attempts at scissors. This explains the lack of scissors on cheap models, and cheap brands. Two blades, a spring, and the ability to cut effectively, while still being able to fold the entire thing into the handle is a bit tricky to pull off. Reamers, Phillips drivers, blade shapes, OHO systems, there's always something off.
-
-
Outburst of anger :ahhh But I'm with you

-
-
Wasted space. Case in point: SOG PPP's washers. Why? Could nothing else fit in there? A small flathead, or maybe a Phillips head with a thicker shaft?
Flatheads are also a plague, especially in cheapos, or some early models, like the OG Wave, or SideClip. Victorinox has solved this, with flathead tips on other implements. -
Poor design choices. SOG's PowerLock handle covers are terrible. The implements are already on the inside, no reason to add an additional step to deploy them. Roll the handle edges to improve comfort.
This would also include multi-tools that were designed by people who have never used one, not even the one they made. I'm looking at you, Camillus Les Stroud Engage MT. -
Lack of pocket clips. This is a common mod people do, due to a lot of models not having it, like the Rebar, Spirit, SAKs, and others. Why are there no pocket-clip scales for 91mm models?
-
Poor quality control. It's fairly accepted that QC has somewhat slipped in recent years. More and more LM and Vic models show up with issues, minor ones usually, but issues nonetheless.
-
Reluctance to go a step further. LM has the staple two blades for a while now. Why not broaden the spectrum, and offer the standard LM plain edge blade, along with a curved, serrated blade? Or a utility blade holder?
Victorinox seems to offer a new model every century. And even then, it's just minor tweaks. Take a look at the SAK mods. If new models are just limited to different arrangements of the existing implements, then shake it up a bit. Add a serrated blade on a Farmer, along with a small one, or whatever. Put plus scales in all models (there already are plus scales for 111mm models, why are they exclusive to Garant?), or, better yet, allow us to choose the color and side tools, when ordering a SAK, just as if we were choosing which color and length of paracord we are ordering. Scissors on 111mm liner-locks, file/pliers on 93mm models, alox/G10/Ti for 91mm models, awls on 58mm models. There is plenty of room for new features. -
Poor quality implements. Lousy attempts at scissors. This explains the lack of scissors on cheap models, and cheap brands. Two blades, a spring, and the ability to cut effectively, while still being able to fold the entire thing into the handle is a bit tricky to pull off. Reamers, Phillips drivers, blade shapes, OHO systems, there's always something off.

You pretty much covered everything I was thinking. I would also add not utilizing space. OG Wave is an easy example. Four flat heads and no awl. FOUR!!!!! Why Leatherman?

Oh and the Spirit needs a pocket clip option.
-
-
Some pretty good responses. Better sheaths is something I have an issue with. I love the old LM leather sheaths. The molle ones are pretty good as well but come on, spending $100 on a tool and getting a sub par sheath is not cool.
-
I'm with Aloha007 on the sheaths... I pay $100 for ANY tool and it had best come with the best quality sheath/case/carrying implement ever.
The weight of most tools bothers me, as does the inclusion of too many of one type of tool (how many flat blade drivers do I need?), or low quality ones. It also bugs me that the clip on the Wingman/Sidekick is on the wrong side... or at least that they didn't put the locking tab hole on the other sides as well, so that the user could move it to whichever of the 8 corners he/she wished.
I'd also like to see the inclusion of some sort of maintenance, or care kit with tools above a certain price range/quality level. You buy a nice enough firearm, you sometimes get a cleaning kit, or at least a cloth and some lubricant for it... why not on a $50+ MT? Some pivot lube, a tiny cleaning brush, ceramic honing tool (even just a cheap plastic one). That would be nice, and is irritating that it already doesnt happen.
-
The Scissors on the Sprit x was a big let down. Also the weird pleather / Velcro sheath. I will go for the swisstool next time!
-
Lack of rust prevention. I realize there is a lot of moving parts, but in most cases you lose specific qualities in order to gain better rust protection.
-
Well that salt water you deal with gives your tools a challenge I'm sure.
-
I hate that none of the plier-based ones have toothpicks. It's my most often-used tool. Sad, but true.
-
Enablers!!
-
I know they're can be allot of things we dislike, but when you're thinking "multitool", sacrifices will typically be made.


-
Lack of diversity. Pliers , knife, Philips and flat drivers, can opener, file and wood saw. Check. Wouldn't mind seeing standard quarter inch hex adapters, not attachments, Xacto blade holders, dikes, and stub nosed pliers floating around. That's my Shan Gri La.
Sent from my SCH-I545 using Tapatalk
-
@getahl said:
Lack of diversity. Pliers , knife, Philips and flat drivers, can opener, file and wood saw. Check. Wouldn't mind seeing standard quarter inch hex adapters, not attachments, Xacto blade holders, dikes, and stub nosed pliers floating around. That's my Shan Gri La.Sent from my SCH-I545 using Tapatalk
There are several MTs with built-in 1/4" hex adapters (Leatherman Crunch, Schrade ST5, Kutmaster and quite a few no-name ones as well), and Gerber still sell Blunt-Nose plier versions of their MP600, and there are several other discontinued MTs that also have BN pliers.
-
Don't hate but there are things I would like to see changed especially with Leatherman.
These days dedicated cap lifters would work better for most people than the can/bottle combo tool..
Get rid of the mini driver the charge is to big for it. Mini drivers would be better if they were incorporated into smaller tools like the Juice or Squirt.
Just remembered, one for the hate list.
I hate for the crimping pliers head, the regular pliers are much better for general use. It's very rare that I'll use a crimp on a electrical repair & when I do I use a dedicated tool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
