What do you HATE about multitools?
-
I'm with Aloha007 on the sheaths... I pay $100 for ANY tool and it had best come with the best quality sheath/case/carrying implement ever.
The weight of most tools bothers me, as does the inclusion of too many of one type of tool (how many flat blade drivers do I need?), or low quality ones. It also bugs me that the clip on the Wingman/Sidekick is on the wrong side... or at least that they didn't put the locking tab hole on the other sides as well, so that the user could move it to whichever of the 8 corners he/she wished.
I'd also like to see the inclusion of some sort of maintenance, or care kit with tools above a certain price range/quality level. You buy a nice enough firearm, you sometimes get a cleaning kit, or at least a cloth and some lubricant for it... why not on a $50+ MT? Some pivot lube, a tiny cleaning brush, ceramic honing tool (even just a cheap plastic one). That would be nice, and is irritating that it already doesnt happen.
-
The Scissors on the Sprit x was a big let down. Also the weird pleather / Velcro sheath. I will go for the swisstool next time!
-
Lack of rust prevention. I realize there is a lot of moving parts, but in most cases you lose specific qualities in order to gain better rust protection.
-
Well that salt water you deal with gives your tools a challenge I'm sure.
-
I hate that none of the plier-based ones have toothpicks. It's my most often-used tool. Sad, but true.
-
Enablers!!
-
I know they're can be allot of things we dislike, but when you're thinking "multitool", sacrifices will typically be made.


-
Lack of diversity. Pliers , knife, Philips and flat drivers, can opener, file and wood saw. Check. Wouldn't mind seeing standard quarter inch hex adapters, not attachments, Xacto blade holders, dikes, and stub nosed pliers floating around. That's my Shan Gri La.
Sent from my SCH-I545 using Tapatalk
-
@getahl said:
Lack of diversity. Pliers , knife, Philips and flat drivers, can opener, file and wood saw. Check. Wouldn't mind seeing standard quarter inch hex adapters, not attachments, Xacto blade holders, dikes, and stub nosed pliers floating around. That's my Shan Gri La.Sent from my SCH-I545 using Tapatalk
There are several MTs with built-in 1/4" hex adapters (Leatherman Crunch, Schrade ST5, Kutmaster and quite a few no-name ones as well), and Gerber still sell Blunt-Nose plier versions of their MP600, and there are several other discontinued MTs that also have BN pliers.
-
Don't hate but there are things I would like to see changed especially with Leatherman.
These days dedicated cap lifters would work better for most people than the can/bottle combo tool..
Get rid of the mini driver the charge is to big for it. Mini drivers would be better if they were incorporated into smaller tools like the Juice or Squirt.
Just remembered, one for the hate list.
I hate for the crimping pliers head, the regular pliers are much better for general use. It's very rare that I'll use a crimp on a electrical repair & when I do I use a dedicated tool. -
I don't hate anything about multitools, what I hate are the uk knife laws preventing me from carrying the tool I'd like to all the time.
-
No one makes a carbon steel, blunt nosed head that's drop forged--most MT heads are just cast. This compromises the strength of the head Gerber MP1 is drop forged carbon, but needlenose don't help me much, and secondly, the other bits leave a lot to be desired. 'Till then, guess I'm just gonna keep my Proto 267 lineman's pliers in the pliers pocket of my carpenter's jeans when I need tough pliers. I'd love to see an entirely carbon steel M/T. Barnett did it over a century ago with the Plier Knife, whose cutters could cut barbed wire. Inside opening tools do bug me a bit, but not as big a deal if I have a pocketknife, or even better a thin Vic or Scout knife on me too, since I use the blade a lot.
Other than that, nothing really. I do prefer an SAK over a multitool, however, but I've carried Bear and LM products (plus traditionals) far more in the past few months than SAKs.
-
@cody6268 said:
No one makes a carbon steel, blunt nosed head that's drop forged--most MT heads are just cast. This compromises the strength of the headThe only one I know of is the discontinued Wichard tool. The head size is quite small though, and the accompanying tools are just a bottle opener, can opener, V notch wire stripper, and combo edged blade
-
Doesn't the Gerber MP1 have forged pliers, or am I having a brain problem?
-
Oh yes. One thing I really hate is single use flat head screw drivers. Look at those in leatherman..... Vic does a better job in utilizing flat head drivers.
-
@JasonJ said:
I'm with Aloha007 on the sheaths... I pay $100 for ANY tool and it had best come with the best quality sheath/case/carrying implement ever.The weight of most tools bothers me, as does the inclusion of too many of one type of tool (how many flat blade drivers do I need?), or low quality ones. It also bugs me that the clip on the Wingman/Sidekick is on the wrong side... or at least that they didn't put the locking tab hole on the other sides as well, so that the user could move it to whichever of the 8 corners he/she wished.
I'd also like to see the inclusion of some sort of maintenance, or care kit with tools above a certain price range/quality level. You buy a nice enough firearm, you sometimes get a cleaning kit, or at least a cloth and some lubricant for it... why not on a $50+ MT? Some pivot lube, a tiny cleaning brush, ceramic honing tool (even just a cheap plastic one). That would be nice, and is irritating that it already doesnt happen.
You know, many makers have provided some sort of sharpening stones over the years. Schrade and Camillus did, with Camillus often selling their knives with steels, and Schrade often added a small stone and some oil for "Free" as a promotion. and many others offer one as part of some sort of gift set, which usually includes the knife, sheath, and oil. But none of the MT makers have.
-
What I hate about MTs is that the best MT is still a compromise that will never do whatever job you needed it to do as well as the right, dedicated tool, which you would have had with you if you had known you were going to need to do that job.
Multitools are just second best at best. You know, it is like driving around a track in a top of the line Camaro, and you're having a fantastic time, but in the back of your head there is always the nagging voice saying that it would have been better if you were driving a Corvette.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Combos rule! 