Official Fidget Thread! Pics Encouraged!
-
Maybe I'll make a video once I have more spinners to compare.
For now, a peak at the new prototype (still not the one that I really want, but that one will take a while)


Aluminum body, and thumb rests (not made yet)
-
@FInixNOver said:
Maybe I'll make a video once I have more spinners to compare.For now, a peak at the new prototype (still not the one that I really want, but that one will take a while)


Aluminum body, and thumb rests (not made yet)
Oooh cool. I just got a Vorso Flat Top the other day and I'm hooked on spinners now

-
Sweeeeeet! :D
Ive been spinning my pencil around my thumb for awhile now but it might be nice to break out the fidgets.
I saved the Bearing and Racer off the rear axle of my Duramax. It still spins great so I'd like to try and make something for it one day......because I don't have enough projects apparently
-
Maybe I'll make a video once I have more spinners to compare.
For now, a peak at the new prototype (still not the one that I really want, but that one will take a while)


Aluminum body, and thumb rests (not made yet)
Oooh cool. I just got a Vorso Flat Top the other day and I'm hooked on spinners now

The Vorso is awesome! The possibility to swap the bearing is genius!!
I just can justify spending 150+ euros it would take to get one. (I know they're sold out at their website, but there's a drop running over at massdrop for those that want to get one - $194.99 + shipping) -
Here it is completed.
Smaller footprint, and shorter spin times (there's a couple of reasons for this - read through). This is to be expected since I'm using steel bearings with steel cage, so there's quite a bit of friction.
One thing I found out is that I'm not using stainless steel bearings. I didn't know this at first, and removing the lubricant that they came with, turned out to be a bad idea.
I started noticing some grinding effect, and latter realized it was rust starting to form inside the bearing. So I can't have the bearing completely unlubricated, so I use a couple of drops of mineral oil, but this also adds to the friction, and shorter spinning times, however, it spins really smoothly.
Either way, it's not a big deal, since i find myself starting and stopping it mid spin. It's more about the fidgeting than the spin times.



-
I had to decommission the V2! :-
Was tying to make some improvements, or so I thought they would be, but I wasn't very successful...
Ended up taking to much material from the carbon fiber layers, and it had too much flex in the middle. Tried gluing the bearing to the CF, but that didn't solve the problem.So, I took it apart, and used most of it to make a new one.
Here it is, V2.1




-
I like this thread :)
RIP V2 - long live V2.1 :D
Is that carbon fibre in the last pic?
-
My fidget is a rubix speed cube. I decided to learn how to solve the rubix cube last year (gotta love you tube for stuff like that), and am now trying to get my time down to as low as possible. I stuck with a cheapo cube until I could solve it easily, then invested in the rubix speed cube and cube lube (which turned out to be standard silicon grease) to get faster. Once I've got to the limits of this one I'll invest in one of the expensive speed cubes maybe.
I keep a rubix cube on my desk at work which most people naturally pick up and mess up for me as well.
I'm down to 2 1/2 minutes now. It never ceases to amaze me how people can solve them in seconds. I'll be happy once I get under 2 minutes (for now) :D
-
Wow - I remember the Rubiks cube when it first came out! I used to be able to solve it, but it took me a lot longer than 2.5 minutes! A guy at school taught us all how to do it.
I have to say that my Vorso Flat Top is hardly ever out of my hand now. It requires no thought, helps me concentrate. I even took it to Oktoberfest :D
<a href="http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_0922_zpstzzqmoif.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_0922_zpstzzqmoif.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@Kevin Davey said:
My fidget is a rubix speed cube. I decided to learn how to solve the rubix cube last year (gotta love you tube for stuff like that), and am now trying to get my time down to as low as possible. I stuck with a cheapo cube until I could solve it easily, then invested in the rubix speed cube and cube lube (which turned out to be standard silicon grease) to get faster. Once I've got to the limits of this one I'll invest in one of the expensive speed cubes maybe.I keep a rubix cube on my desk at work which most people naturally pick up and mess up for me as well.
I'm down to 2 1/2 minutes now. It never ceases to amaze me how people can solve them in seconds. I'll be happy once I get under 2 minutes (for now) :D
It's been a while since I picked mine up!
I think the best time I ever got was just a hair under 2 minutes.
If you want to get a good speed cube without being too expensive, you can try cube4you dot com. I have an original, but it was quite stiff, Then I got a speed cube kit (yes, completely disassembled :ahhh) from that site, and got another kit (a cheaper one) completely free!! -
My fidget is a rubix speed cube. I decided to learn how to solve the rubix cube last year (gotta love you tube for stuff like that), and am now trying to get my time down to as low as possible. I stuck with a cheapo cube until I could solve it easily, then invested in the rubix speed cube and cube lube (which turned out to be standard silicon grease) to get faster. Once I've got to the limits of this one I'll invest in one of the expensive speed cubes maybe.
I keep a rubix cube on my desk at work which most people naturally pick up and mess up for me as well.
I'm down to 2 1/2 minutes now. It never ceases to amaze me how people can solve them in seconds. I'll be happy once I get under 2 minutes (for now) :D
It's been a while since I picked mine up!
I think the best time I ever got was just a hair under 2 minutes.
If you want to get a good speed cube without being too expensive, you can try cube4you dot com. I have an original, but it was quite stiff, Then I got a speed cube kit (yes, completely disassembled :ahhh) from that site, and got another kit (a cheaper one) completely free!!Thanks, I'll check them out
-
Family photo of my EDC fidgety items.

-
Begleri received from firiki in his 5k GAW - This is awesome to fiddle with. The stones are very tactile and the whole thing has a nice weight to it.
It also acts as an extremely competent dowsing pendulum.
<a href="https://flic.kr/p/NN8Jho" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5448/30714478166_3a488a5429_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>WP_20161103_015 by magpie2112, on Flickr -
I've taken to making my own spinners - the kids love 'em :D
<a href="http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_1016_zpsm95tr9zs.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_1016_zpsm95tr9zs.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_1018_zpselhaxuwe.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_1018_zpselhaxuwe.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_1035_zpsmarjr6ba.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_1035_zpsmarjr6ba.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@DaveK said:
I've taken to making my own spinners - the kids love 'em :D<a href="http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_1016_zpsm95tr9zs.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_1016_zpsm95tr9zs.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_1018_zpselhaxuwe.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_1018_zpselhaxuwe.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_1035_zpsmarjr6ba.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_1035_zpsmarjr6ba.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
That is awesome!

Any chance you'd be able to do a build guide or tutorial on how you make those? I wouldn't mind giving that a shot.

-
I will yes! I did try to film me putting a batch together last week as some guys of Facebook were asking, but it didn't come out well!
I will try again soon though - maybe just go through the parts / how to assemble :)
-
@DaveK said:
I will yes! I did try to film me putting a batch together last week as some guys of Facebook were asking, but it didn't come out well!I will try again soon though - maybe just go through the parts / how to assemble :)
I'd be interested in that too, I saw a photo on instagram about those spinners. Is there a facebook spinner community??
-
@FInixNOver said:
Family photo of my EDC fidgety items.
Hey mate, how hard was it to add that clip to the SAK? I have a couple of those coming off evilbay for my keys and Leatherman Juice
-
Family photo of my EDC fidgety items.

Hey mate, how hard was it to add that clip to the SAK? I have a couple of those coming off evilbay for my keys and Leatherman Juice
I had to take the SAK apart, drill and tap two holes for the screws, and put it back together. For the clip I just had to enlarge the hole to fit M2.5 screws.
I can take a few pictures later, and post them here.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
