Show off your Sak mod's!
-
@jaya_man said:
Am currently doing a friend a favour who asked me to replace the chipped blade on his favourite Wenger SAK with that from a donor.My first time disassembling a Wenger... First observation is that there are no bushings that will lock scales in place... Instead, the locking system is built onto the outer liners as many have pointed out in this forum. Another thing I observed is the bottle opener/screw driver... interesting locking mechanism if press down while in use. Seems to lock onto the notch of the backspring..
As many have pointed out, pin sizes are all 2.5mm.. Here are some picks of the disassembled Wengers
The one with the chipped off blade...

The donor...

Now just need to find time to peen... Hope all goes well [emoji23]
Sent from my iPhone using Tapatalk
First time I've seen a disassembled Wenger with the self-locking screwdriver. The mechanism is ingeniously simple.
-
Am currently doing a friend a favour who asked me to replace the chipped blade on his favourite Wenger SAK with that from a donor.
My first time disassembling a Wenger... First observation is that there are no bushings that will lock scales in place... Instead, the locking system is built onto the outer liners as many have pointed out in this forum. Another thing I observed is the bottle opener/screw driver... interesting locking mechanism if press down while in use. Seems to lock onto the notch of the backspring..
As many have pointed out, pin sizes are all 2.5mm.. Here are some picks of the disassembled Wengers
The one with the chipped off blade...

The donor...

Now just need to find time to peen... Hope all goes well [emoji23]
Sent from my iPhone using Tapatalk
First time I've seen a disassembled Wenger with the self-locking screwdriver. The mechanism is ingeniously simple.
Agree...
Sent from my iPhone using Tapatalk
-
Excellent pics gents


-
TiPioneer & TiPioneerX & TiVelcro
-
That one reminds me of an alligator.
JR -
@Monrogue said:
Just a minor revision to my MechaRogue, but a first for me. I replaced the nail file with a cap lifter.

Sent from my SM-G920R4 using Tapatalk
I assume that''s originally one of Syph007's (SAKModder) creations? As these have torx screws, does this make subsequent modding much easier (at least for the recipient knife), as no rivets to deal with?
-
Just a minor revision to my MechaRogue, but a first for me. I replaced the nail file with a cap lifter.

Sent from my SM-G920R4 using Tapatalk
I assume that''s originally one of Syph007's (SAKModder) creations? As these have torx screws, does this make subsequent modding much easier (at least for the recipient knife), as no rivets to deal with?
You are correct
I would say the screws make it much easier. I have no experience with pin work, but it sounds like a bit of a pain to me. This was the first tweak I've done, and had no issue with it.Sent from my SM-G920R4 using Tapatalk
-
New page banana man dance.

-
@jaya_man said:
Am currently doing a friend a favour who asked me to replace the chipped blade on his favourite Wenger SAK with that from a donor.
My first time disassembling a Wenger...
First observation is that there are no bushings that will lock scales in place... Instead, the locking system is built onto the outer liners ......
Another thing I observed is the bottle opener/screw driver... interesting locking mechanism if press down while in use. Seems to lock onto the notch of the backspring..Nice post and pics Jaya-Man - awlthough I think you got your awl and cs springs swapped over in the top piccie
Yep the Wenger screwdriver locking mechanism is indeed ingenious - Why don't Vic adopt it ? ???And VG of you to do this favour for your friend....... But I've gotta ask this...
You have two, two-layer/corkscrew Wengers - A Viking (chipped blade) and a Commander - And you switched the blade from the Commander to the Viking
Why could your friend not just carry the Commander? - Or even reprofile the blade on the Viking ? .............. Seems so much simpler ???
..........Although not as much fun for you!!
Is the second blade, or the Marlborough logo, so important to him ? I guess sentimental value could come in here**@ ALM **- Mindblowingly amazing work as always
:)??? How did you know that would happen ???
-
Zman is from the future, so he knows when each new page will occur :ahhh
Sent from my SM-G920R4 using Tapatalk
-
Am currently doing a friend a favour who asked me to replace the chipped blade on his favourite Wenger SAK with that from a donor.
My first time disassembling a Wenger...
First observation is that there are no bushings that will lock scales in place... Instead, the locking system is built onto the outer liners ......
Another thing I observed is the bottle opener/screw driver... interesting locking mechanism if press down while in use. Seems to lock onto the notch of the backspring..Nice post and pics Jaya-Man - awlthough I think you got your awl and cs springs swapped over in the top piccie
Yep the Wenger screwdriver locking mechanism is indeed ingenious - Why don't Vic adopt it ? ???And VG of you to do this favour for your friend....... But I've gotta ask this...
You have two, two-layer/corkscrew Wengers - A Viking (chipped blade) and a Commander - And you switched the blade from the Commander to the Viking
Why could your friend not just carry the Commander? - Or even reprofile the blade on the Viking ? .............. Seems so much simpler ???
..........Although not as much fun for you!!
Is the second blade, or the Marlborough logo, so important to him ? I guess sentimental value could come in here**@ ALM **- Mindblowingly amazing work as always
:)??? How did you know that would happen ???
Yup, my bad... I realized it before reassembly... the marlboro one is definitely of sentimental value... just reprofiling the blade will not make my friend any happier...

Completed the builds over the weekend and sent them back to my friend... I also asked my friend to have the chipped off blade reprofiled to something like a sheepsfoot...
Sent from my iPhone using Tapatalk
-
Am currently doing a friend a favour who asked me to replace the chipped blade on his favourite Wenger SAK with that from a donor.
My first time disassembling a Wenger...
First observation is that there are no bushings that will lock scales in place... Instead, the locking system is built onto the outer liners ......
Another thing I observed is the bottle opener/screw driver... interesting locking mechanism if press down while in use. Seems to lock onto the notch of the backspring..Nice post and pics Jaya-Man - awlthough I think you got your awl and cs springs swapped over in the top piccie
Yep the Wenger screwdriver locking mechanism is indeed ingenious - Why don't Vic adopt it ? ???And VG of you to do this favour for your friend....... But I've gotta ask this...
You have two, two-layer/corkscrew Wengers - A Viking (chipped blade) and a Commander - And you switched the blade from the Commander to the Viking
Why could your friend not just carry the Commander? - Or even reprofile the blade on the Viking ? .............. Seems so much simpler ???
..........Although not as much fun for you!!
Is the second blade, or the Marlborough logo, so important to him ? I guess sentimental value could come in here**@ ALM **- Mindblowingly amazing work as always
:)??? How did you know that would happen ???
Yup, my bad... I realized it before reassembly... the marlboro one is definitely of sentimental value... just reprofiling the blade will not make my friend any happier...

Completed the builds over the weekend and sent them back to my friend... I also asked my friend to have the chipped off blade reprofiled to something like a sheepsfoot...
Sent from my iPhone using Tapatalk

-
Am currently doing a friend a favour who asked me to replace the chipped blade on his favourite Wenger SAK with that from a donor.
My first time disassembling a Wenger...
First observation is that there are no bushings that will lock scales in place... Instead, the locking system is built onto the outer liners ......
Another thing I observed is the bottle opener/screw driver... interesting locking mechanism if press down while in use. Seems to lock onto the notch of the backspring..Nice post and pics Jaya-Man - awlthough I think you got your awl and cs springs swapped over in the top piccie
Yep the Wenger screwdriver locking mechanism is indeed ingenious - Why don't Vic adopt it ? ???And VG of you to do this favour for your friend....... But I've gotta ask this...
You have two, two-layer/corkscrew Wengers - A Viking (chipped blade) and a Commander - And you switched the blade from the Commander to the Viking
Why could your friend not just carry the Commander? - Or even reprofile the blade on the Viking ? .............. Seems so much simpler ???
..........Although not as much fun for you!!
Is the second blade, or the Marlborough logo, so important to him ? I guess sentimental value could come in here**@ ALM **- Mindblowingly amazing work as always
:)??? How did you know that would happen ???
Yup, my bad... I realized it before reassembly... the marlboro one is definitely of sentimental value... just reprofiling the blade will not make my friend any happier...

Completed the builds over the weekend and sent them back to my friend... I also asked my friend to have the chipped off blade reprofiled to something like a sheepsfoot...
Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk
-
Classic SD with 2 added custom blades - a plastic cutter and a bottle opener.

-
I fashioned the custom blades myself. The plastic cutter was originally the small knife of a Classic, and the bottle opener was a Classic nail file. I just worked them over with a Dremel tool.
Note that the bottle opener is reverse-levered as compared to the bottle opener on, say, a Rambler. It's also a lot less robust being only half the thickness! The plastic cutter is sharp along the barb and the entire edge, so it can also be used as a rope cutter.
This was my first attempt at customizing a SAK, and I had a lot of fun!
-
Nicely done Bob, and welcome

Sent from my SM-G920R4 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login