Show off your Sak mod's!
-
New page banana man dance.

-
@jaya_man said:
Am currently doing a friend a favour who asked me to replace the chipped blade on his favourite Wenger SAK with that from a donor.
My first time disassembling a Wenger...
First observation is that there are no bushings that will lock scales in place... Instead, the locking system is built onto the outer liners ......
Another thing I observed is the bottle opener/screw driver... interesting locking mechanism if press down while in use. Seems to lock onto the notch of the backspring..Nice post and pics Jaya-Man - awlthough I think you got your awl and cs springs swapped over in the top piccie
Yep the Wenger screwdriver locking mechanism is indeed ingenious - Why don't Vic adopt it ? ???And VG of you to do this favour for your friend....... But I've gotta ask this...
You have two, two-layer/corkscrew Wengers - A Viking (chipped blade) and a Commander - And you switched the blade from the Commander to the Viking
Why could your friend not just carry the Commander? - Or even reprofile the blade on the Viking ? .............. Seems so much simpler ???
..........Although not as much fun for you!!
Is the second blade, or the Marlborough logo, so important to him ? I guess sentimental value could come in here**@ ALM **- Mindblowingly amazing work as always
:)??? How did you know that would happen ???
-
Zman is from the future, so he knows when each new page will occur :ahhh
Sent from my SM-G920R4 using Tapatalk
-
Am currently doing a friend a favour who asked me to replace the chipped blade on his favourite Wenger SAK with that from a donor.
My first time disassembling a Wenger...
First observation is that there are no bushings that will lock scales in place... Instead, the locking system is built onto the outer liners ......
Another thing I observed is the bottle opener/screw driver... interesting locking mechanism if press down while in use. Seems to lock onto the notch of the backspring..Nice post and pics Jaya-Man - awlthough I think you got your awl and cs springs swapped over in the top piccie
Yep the Wenger screwdriver locking mechanism is indeed ingenious - Why don't Vic adopt it ? ???And VG of you to do this favour for your friend....... But I've gotta ask this...
You have two, two-layer/corkscrew Wengers - A Viking (chipped blade) and a Commander - And you switched the blade from the Commander to the Viking
Why could your friend not just carry the Commander? - Or even reprofile the blade on the Viking ? .............. Seems so much simpler ???
..........Although not as much fun for you!!
Is the second blade, or the Marlborough logo, so important to him ? I guess sentimental value could come in here**@ ALM **- Mindblowingly amazing work as always
:)??? How did you know that would happen ???
Yup, my bad... I realized it before reassembly... the marlboro one is definitely of sentimental value... just reprofiling the blade will not make my friend any happier...

Completed the builds over the weekend and sent them back to my friend... I also asked my friend to have the chipped off blade reprofiled to something like a sheepsfoot...
Sent from my iPhone using Tapatalk
-
Am currently doing a friend a favour who asked me to replace the chipped blade on his favourite Wenger SAK with that from a donor.
My first time disassembling a Wenger...
First observation is that there are no bushings that will lock scales in place... Instead, the locking system is built onto the outer liners ......
Another thing I observed is the bottle opener/screw driver... interesting locking mechanism if press down while in use. Seems to lock onto the notch of the backspring..Nice post and pics Jaya-Man - awlthough I think you got your awl and cs springs swapped over in the top piccie
Yep the Wenger screwdriver locking mechanism is indeed ingenious - Why don't Vic adopt it ? ???And VG of you to do this favour for your friend....... But I've gotta ask this...
You have two, two-layer/corkscrew Wengers - A Viking (chipped blade) and a Commander - And you switched the blade from the Commander to the Viking
Why could your friend not just carry the Commander? - Or even reprofile the blade on the Viking ? .............. Seems so much simpler ???
..........Although not as much fun for you!!
Is the second blade, or the Marlborough logo, so important to him ? I guess sentimental value could come in here**@ ALM **- Mindblowingly amazing work as always
:)??? How did you know that would happen ???
Yup, my bad... I realized it before reassembly... the marlboro one is definitely of sentimental value... just reprofiling the blade will not make my friend any happier...

Completed the builds over the weekend and sent them back to my friend... I also asked my friend to have the chipped off blade reprofiled to something like a sheepsfoot...
Sent from my iPhone using Tapatalk

-
Am currently doing a friend a favour who asked me to replace the chipped blade on his favourite Wenger SAK with that from a donor.
My first time disassembling a Wenger...
First observation is that there are no bushings that will lock scales in place... Instead, the locking system is built onto the outer liners ......
Another thing I observed is the bottle opener/screw driver... interesting locking mechanism if press down while in use. Seems to lock onto the notch of the backspring..Nice post and pics Jaya-Man - awlthough I think you got your awl and cs springs swapped over in the top piccie
Yep the Wenger screwdriver locking mechanism is indeed ingenious - Why don't Vic adopt it ? ???And VG of you to do this favour for your friend....... But I've gotta ask this...
You have two, two-layer/corkscrew Wengers - A Viking (chipped blade) and a Commander - And you switched the blade from the Commander to the Viking
Why could your friend not just carry the Commander? - Or even reprofile the blade on the Viking ? .............. Seems so much simpler ???
..........Although not as much fun for you!!
Is the second blade, or the Marlborough logo, so important to him ? I guess sentimental value could come in here**@ ALM **- Mindblowingly amazing work as always
:)??? How did you know that would happen ???
Yup, my bad... I realized it before reassembly... the marlboro one is definitely of sentimental value... just reprofiling the blade will not make my friend any happier...

Completed the builds over the weekend and sent them back to my friend... I also asked my friend to have the chipped off blade reprofiled to something like a sheepsfoot...
Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk
-
Classic SD with 2 added custom blades - a plastic cutter and a bottle opener.

-
I fashioned the custom blades myself. The plastic cutter was originally the small knife of a Classic, and the bottle opener was a Classic nail file. I just worked them over with a Dremel tool.
Note that the bottle opener is reverse-levered as compared to the bottle opener on, say, a Rambler. It's also a lot less robust being only half the thickness! The plastic cutter is sharp along the barb and the entire edge, so it can also be used as a rope cutter.
This was my first attempt at customizing a SAK, and I had a lot of fun!
-
Nicely done Bob, and welcome

Sent from my SM-G920R4 using Tapatalk
-
Thanks for all your approval!
I hadn't learned until recently that one could take a sak apart, and when I did I just had to try. I've carried a classic SD daily for 30 years or more, and had spares so... Now that I know how, I think I'll buy some used ones on eBay and play around some more.
Off topic question: does anyone make custom scales that accept the toothpick and tweezers?
-
@Bob Wolfson said:
Thanks for all your approval!I hadn't learned until recently that one could take a sak apart, and when I did I just had to try. I've carried a classic SD daily for 30 years or more, and had spares so... Now that I know how, I think I'll buy some used ones on eBay and play around some more.
**
Off topic question: does anyone make custom scales that accept the toothpick and tweezers?**Yes, you! You've just not mastered it yet :D
Seriously, give it a go. All the tool modders here started out just the way you have done, by expanding their thinking and then getting stuck in. There's loads of people here who can help you get started if you have any questions

-
Welcome to the SAK madhouse Bob
Great to see you enjoying your first modding experience - I am in the same boat right now - also with a 58mm mod (well more of a repair!!)As 50ft said some guys here make their own.
Here is archerwin's blogMWDP makes amazing scales for SAKs - But I think he only sells them with the knife - Someone else asked if he sold only scales a while ago, he preferred not to - due to fitting etc
/topic/49104And then we have our amazing Syph - Who does sell his scales - But they only have a slot for the tw - I think he has not found a way to secure the tp in place yet
Look at the later pages and his titanium scales -
New pic of Yew scales - 1st draft. Still need to cut the end holes for the T&T, although migh use Wenger system which will reduce work and look nicer. No varnish or oil on these yet (as I said - first draft) - as they still need a bit of sanding, and I'm tempted to pop them on the miller and cut a little + as a logo... Thoughts?

-
@Rototype said:
New pic of Yew scales - 1st draft. Still need to cut the end holes for the T&T, although migh use Wenger system which will reduce work and look nicer. No varnish or oil on these yet (as I said - first draft) - as they still need a bit of sanding, and I'm tempted to pop them on the miller and cut a little + as a logo... Thoughts?Nice!

I plan to do some scales at some point. I won't be putting a cross or logo on the scales. I understand why people do that, but for me, the scales aren't Swiss. If I've gone to the trouble of making them, they'll have whatever logo I choose or none at all :D
-
@Rototype said:
New pic of Yew scales - 1st draft. Still need to cut the end holes for the T&T, although might use Wenger system which will reduce work and look nicer. No varnish or oil on these yet (as I said - first draft) - as they still need a bit of sanding, and I'm tempted to pop them on the miller and cut a little + as a logo... Thoughts?Very nice looking Classic RT - I love wooden scales - And hope to make my own some day.
I am a big fan of the TT, so would need to include them - But always worried about how to do that bit >:( - Although Archerwin and MWDP seem to manage OK.Using the Wenger system is a** brilliant idea**. - Will you actually use W TT or will you mod V TT to do it - I will have a think and a check on that
:DRe the cross I was planning to stick a regular Vic shield on the SAK (Archerwin does this) - But not sure how secure that would be ???
- I wondered about digging out a bit of wood to fit it - But that would be very delicate and tricky work.
Just a cut cross would be OK too
- I wondered about digging out a bit of wood to fit it - But that would be very delicate and tricky work.
-
@Huntsman said:
Using the Wenger system is a** brilliant idea**. - Will you actually use W TT or will you mod V TT to do it - I will have a think and a check on that
:DThat is an interesting idea. Gives the scales a cleaner look too. It seems the Wenger toothpick and tweezers are still readily available as spares so it seems like a very viable option. Do the Wenger ones require a cutout in the liner to accommodate the heads of the T&T?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
