sLaughter's Hungry Ranger
-
I do like the mod.very well sLaughterMed

I would like that with scissors and an inline Phillips
What would have to be opposite the Phillips beside the magnifier
I could live with it but would like to know if there are other options 
-
@Poncho65 said:
I do like the mod.very well sLaughterMed
I would like that with scissors and an inline Phillips
What would have to be opposite the Phillips beside the magnifier
I could live with it but would like to know if there are other options 
I think you can double up the 2 openers opposite the philips - see syphs mods for details.
-
I do like the mod.very well sLaughterMed

I would like that with scissors and an inline Phillips
What would have to be opposite the Phillips beside the magnifier
I could live with it but would like to know if there are other options 
I think you can double up the 2 openers opposite the philips - see syphs mods for details.
Won't work on the 91mm frame. Can be done on the 93mm with some work.
-
I do like the mod.very well sLaughterMed

I would like that with scissors and an inline Phillips
What would have to be opposite the Phillips beside the magnifier
I could live with it but would like to know if there are other options 
I think you can double up the 2 openers opposite the philips - see syphs mods for details.
Won't work on the 91mm frame. Can be done on the 93mm with some work.
This is correct, the only other thing that works cross the Phillip driver on the 91mm frane is that terrible LED light. It might be an interesting place to put a T&T and Pen holder though...
-
Just seen this S-Mizzle - excellent mod. I wish I was as brave as you to leave the opener layer out. Maybe I'll do that next time. You've picked a great set of tools and I love seeing the awl in a 91mm frame.
Did you have to pack the awl out at the pivot or did it just slip in ok? I had a bit of trouble with my two.

Thanks mags, I appreciate it. I'm not quite sure what you mean by "pack the awl out" but I didn't need to modify anything to fit it in. It was a simple drop in for me. I kept the spacer in place as well, to make sure there was enough room for the main blade. The awl (plus spacer) is slightly too wide for the blade back spring, but you would have to be looking for it to notice, and it doesn't affect function at all.
Did you have to make the pivot hole on the awl smaller?
Sent from my iPhone using Tapatalk
-
I do like the mod.very well sLaughterMed

I would like that with scissors and an inline Phillips
What would have to be opposite the Phillips beside the magnifier
I could live with it but would like to know if there are other options 
I think you can double up the 2 openers opposite the philips - see syphs mods for details.
Won't work on the 91mm frame. Can be done on the 93mm with some work.
This is correct, the only other thing that works cross the Phillip driver on the 91mm frane is that terrible LED light. It might be an interesting place to put a T&T and Pen holder though...
I guess I will just stick with the magnifier
:D -
Just seen this S-Mizzle - excellent mod. I wish I was as brave as you to leave the opener layer out. Maybe I'll do that next time. You've picked a great set of tools and I love seeing the awl in a 91mm frame.
Did you have to pack the awl out at the pivot or did it just slip in ok? I had a bit of trouble with my two.

Thanks mags, I appreciate it. I'm not quite sure what you mean by "pack the awl out" but I didn't need to modify anything to fit it in. It was a simple drop in for me. I kept the spacer in place as well, to make sure there was enough room for the main blade. The awl (plus spacer) is slightly too wide for the blade back spring, but you would have to be looking for it to notice, and it doesn't affect function at all.
Did you have to make the pivot hole on the awl smaller?
Sent from my iPhone using Tapatalk
Nope, I just stuck it in there. The .5mm difference between the pin and the hole is unnoticeable. It really is just a drop in mod.
-
Well I am nearly to the point of tearing a Champion apart and adding an inline awl in place of the small blade taking the scaler and openers out and I will have a very similar but a bit wider SAK than this one

I just need to source an inline awl
Any ideas guys on where to get one without taking a Pioneer or similar apart 
Or anyone know of a place to get a pile of dirty SAKs
:o :ahhh :ahhh :ahhh 
-
@Poncho65 said:
Well I am nearly to the point of tearing a Champion apart and adding an inline awl in place of the small blade taking the scaler and openers out and I will have a very similar but a bit wider SAK than this one
I just need to source an inline awl
Any ideas guys on where to get one without taking a Pioneer or similar apart 
Or anyone know of a place to get a pile of dirty SAKs
:o :ahhh :ahhh :ahhh 
I usually get my dirty SAKs from eBay.

Let me know if you find a good source for the inline awl, I could use a few too
-
Well I am nearly to the point of tearing a Champion apart and adding an inline awl in place of the small blade taking the scaler and openers out and I will have a very similar but a bit wider SAK than this one

I just need to source an inline awl
Any ideas guys on where to get one without taking a Pioneer or similar apart 
Or anyone know of a place to get a pile of dirty SAKs
:o :ahhh :ahhh :ahhh 
I usually get my dirty SAKs from eBay.

Let me know if you find a good source for the inline awl, I could use a few too
I will let you know if I do
Off to the bay of E :ahhh -
Add me to the list of those wanting an inline awl.

-
What is awl this commotion?

I reckon anyone in their right mind would love an opportunity to get their dirty mitts on a Pioneer-less awl.
How about two inline screwdrivers in the same layer, with one of them filed down to be awl pointy?
-tom -
@T14 said:
What is awl this commotion?
I reckon anyone in their right mind would love an opportunity to get their dirty mitts on a Pioneer-less awl.
How about two inline screwdrivers in the same layer, with one of them filed down to be awl pointy?
-tomJust rereading this now and this comment has my mind working toward using two inline Phillips and grinding one down to a point instead of having to source an in line awl :ahhh What is the smallest SAK with an inline Phillips
Is it the Explorer or is there something smaller
Looking for a common SAK though and don't go telling me some impossible to find SAK that they discontinued 25 years ago either
:D -
Sorry, no models in production that are thinner than explorer AND have inline philips as far as I know....
You could try a Yeoman or scientist. :P
-
Or go for the more expensive Spartan Lite...

Sent from my iPhone using Tapatalk
-
What are thoughts concerning turning an inline Phillips into an awl

-
@Pablo O'Brien said:
Sorry, no models in production that are thinner than explorer AND have inline philips as far as I know....
**
You could try a Yeoman or scientist**. :P
-
-
Or go for the more expensive Spartan Lite...

Sent from my iPhone using Tapatalk
You know I am going cheap as I can on this mod
:DGot a second hand really cheap... It didn't have batteries in the LED, small blade tip is bent and the back scales has some burnt marks...

Haven't done anything to it yet besides putting on a couple of fresh button cells... Still figuring out what to do with it besides replacing the small blade... Was originally thinking if turning it into a Yeoman Lite, but with the scissors placed on the outer side, nail nick will be difficult to access... So now I'm toying with the idea of adding scissors, metal file and woodsaw... Or probably just the scissors (Explorer Lite)... Or a Mountaineer Lite... Or... Or... ah might as well save it for later until I can think of something

Sent from my iPhone using Tapatalk
-
Or go for the more expensive Spartan Lite...

Sent from my iPhone using Tapatalk
You know I am going cheap as I can on this mod
:DGot a second hand really cheap... It didn't have batteries in the LED, small blade tip is bent and the back scales has some burnt marks...

Haven't done anything to it yet besides putting on a couple of fresh button cells... Still figuring out what to do with it besides replacing the small blade... Was originally thinking if turning it into a Yeoman Lite, but with the scissors placed on the outer side, nail nick will be difficult to access... So now I'm toying with the idea of adding scissors, metal file and woodsaw... Or probably just the scissors (Explorer Lite)... Or a Mountaineer Lite... Or... Or... ah might as well save it for later until I can think of something

Sent from my iPhone using Tapatalk


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login