sLaughter's Hungry Ranger
-
@Poncho65 said:
Well I am nearly to the point of tearing a Champion apart and adding an inline awl in place of the small blade taking the scaler and openers out and I will have a very similar but a bit wider SAK than this one
I just need to source an inline awl
Any ideas guys on where to get one without taking a Pioneer or similar apart 
Or anyone know of a place to get a pile of dirty SAKs
:o :ahhh :ahhh :ahhh 
I usually get my dirty SAKs from eBay.

Let me know if you find a good source for the inline awl, I could use a few too
-
Well I am nearly to the point of tearing a Champion apart and adding an inline awl in place of the small blade taking the scaler and openers out and I will have a very similar but a bit wider SAK than this one

I just need to source an inline awl
Any ideas guys on where to get one without taking a Pioneer or similar apart 
Or anyone know of a place to get a pile of dirty SAKs
:o :ahhh :ahhh :ahhh 
I usually get my dirty SAKs from eBay.

Let me know if you find a good source for the inline awl, I could use a few too
I will let you know if I do
Off to the bay of E :ahhh -
Add me to the list of those wanting an inline awl.

-
What is awl this commotion?

I reckon anyone in their right mind would love an opportunity to get their dirty mitts on a Pioneer-less awl.
How about two inline screwdrivers in the same layer, with one of them filed down to be awl pointy?
-tom -
@T14 said:
What is awl this commotion?
I reckon anyone in their right mind would love an opportunity to get their dirty mitts on a Pioneer-less awl.
How about two inline screwdrivers in the same layer, with one of them filed down to be awl pointy?
-tomJust rereading this now and this comment has my mind working toward using two inline Phillips and grinding one down to a point instead of having to source an in line awl :ahhh What is the smallest SAK with an inline Phillips
Is it the Explorer or is there something smaller
Looking for a common SAK though and don't go telling me some impossible to find SAK that they discontinued 25 years ago either
:D -
Sorry, no models in production that are thinner than explorer AND have inline philips as far as I know....
You could try a Yeoman or scientist. :P
-
Or go for the more expensive Spartan Lite...

Sent from my iPhone using Tapatalk
-
What are thoughts concerning turning an inline Phillips into an awl

-
@Pablo O'Brien said:
Sorry, no models in production that are thinner than explorer AND have inline philips as far as I know....
**
You could try a Yeoman or scientist**. :P
-
-
Or go for the more expensive Spartan Lite...

Sent from my iPhone using Tapatalk
You know I am going cheap as I can on this mod
:DGot a second hand really cheap... It didn't have batteries in the LED, small blade tip is bent and the back scales has some burnt marks...

Haven't done anything to it yet besides putting on a couple of fresh button cells... Still figuring out what to do with it besides replacing the small blade... Was originally thinking if turning it into a Yeoman Lite, but with the scissors placed on the outer side, nail nick will be difficult to access... So now I'm toying with the idea of adding scissors, metal file and woodsaw... Or probably just the scissors (Explorer Lite)... Or a Mountaineer Lite... Or... Or... ah might as well save it for later until I can think of something

Sent from my iPhone using Tapatalk
-
Or go for the more expensive Spartan Lite...

Sent from my iPhone using Tapatalk
You know I am going cheap as I can on this mod
:DGot a second hand really cheap... It didn't have batteries in the LED, small blade tip is bent and the back scales has some burnt marks...

Haven't done anything to it yet besides putting on a couple of fresh button cells... Still figuring out what to do with it besides replacing the small blade... Was originally thinking if turning it into a Yeoman Lite, but with the scissors placed on the outer side, nail nick will be difficult to access... So now I'm toying with the idea of adding scissors, metal file and woodsaw... Or probably just the scissors (Explorer Lite)... Or a Mountaineer Lite... Or... Or... ah might as well save it for later until I can think of something

Sent from my iPhone using Tapatalk


-
Making the Phillips pointy sounds like a lot of work. Plus, if you did that, wouldnt the pointy part be exposed when folded inward (unless im mistaken, and the inline Phillips does fold fully into the frame)
-
@sLaughterMed said:
Making the Phillips pointy sounds like a lot of work. Plus, if you did that, wouldnt the pointy part be exposed when folded inward (unless im mistaken, and the inline Phillips does fold fully into the frame)Yeah the pokey bit wouldn't be very pocket friendly
:o :D Was just throwing that out to see what peeps thought about it and it would be a last resort because I am still on the look out for an in line awl 
-
Except for not having said awl I decided to see how my mod would go together and you can see my progress in my perfect SAK thread :D If I would have had enough pin stock most likely I would have just forgone the in line awl idea and peened it all back together but I lacked just a tiny bit of pin stock to be able to peen it over the bushing :-[ This may hvae been for the best as now I need to source some pin stock and it gives me more time to get the awl

-
Ponch, rather than putting the feelers out for an in-line awl on it's own, why not see if anyone has a spare pioneer or soldier or something - for my Pikachu mod I bought a cheap and already partly modded SI just to harvest the awl.
It was worth awl the effort (sorry, wrong thread). -
@magentus said:
Ponch, rather than putting the feelers out for an in-line awl on it's own, why not see if anyone has a spare pioneer or soldier or something - for my Pikachu mod I bought a cheap and already partly modded SI just to harvest the awl.
It was worth awl the effort (sorry, wrong thread).This is my plan as well, I have a Rancher on the way just for the awl and pruner blade. Chances are that the inline awl is what people use from the knife and that you'd have a much easier time finding any other part.
-

@magentus said:
Ponch, rather than putting the feelers out for an in-line awl on it's own, why not see if anyone has a spare pioneer or soldier or something - for my Pikachu mod I bought a cheap and already partly modded SI just to harvest the awl.
It was worth awl the effort (sorry, wrong thread).I have been watching a lot of auctions on ebay for many different alox models
Almost won a few but of course in the last few seconds
Well you know :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login