"How-to" for 58mm modding - Pic Heavy
-
@Syph007 said:
Hey thanks for taking the time to post up all the pics.
I love to see how other folks work on SAKs.So far Ive only tore down one 58 rambler, but I have an obscene amount of donor 58s coming in, and Im excited to build my mini monster. Still scratching my head on how to include the T&T on an alox version, but I think maybe making an inner layer that takes them is the only way to go.
I think the idea on the monster 58 build page would work just fine.

If you need that part designed and laser cut from clear acrylic, let me know. I have been after a mini monster since I saw it!
-
@KTesh said:
**Perhaps a "Lord of the Stickies", One sticky to rule them all? **Just one with a "How-to" label and links to the appropriate knife types. Problem is that it would have to be able to be edited after the editing cutoff has passed, and a mod (or two) may have to babysit it to add new links.If not, then stick it because the info is very useful, and I've found that searches can be frustrating due to the nature of overlapping topics.
(BTW, Nice job on the mod!
)They are already in the works for a few days now, the SAK MOD How to thread has already been stickied and we are gathering data for the Multitool mod link thread.
-
Hey thanks for taking the time to post up all the pics.
I love to see how other folks work on SAKs.So far Ive only tore down one 58 rambler, but I have an obscene amount of donor 58s coming in, and Im excited to build my mini monster. Still scratching my head on how to include the T&T on an alox version, but I think maybe making an inner layer that takes them is the only way to go.
I think the idea on the monster 58 build page would work just fine.

If you need that part designed and laser cut from clear acrylic, let me know. I have been after a mini monster since I saw it!
That might be faster... hmm. I started prototyping one from polycarbonate to see how I like the idea though. I just have to cut the channels for the T&T. I couldnt decide it it should clear or solid. I'll make one with the polycarb and if I dont like it, I'll probably do polished Ti as I have some scrap the right size. Luckily 1/8 material works perfect and since this is for a monster extra width isnt a big deal.

Both tools actually fit nicely horizontally, but its not possible to actually remove them once you have liners on, so that method pictured is the only decent way to do it that I can think of. Its just a matter of leaving the tiniest lip exposed to get them out.
-
Hey thanks for taking the time to post up all the pics.
I love to see how other folks work on SAKs.So far Ive only tore down one 58 rambler, but I have an obscene amount of donor 58s coming in, and Im excited to build my mini monster. Still scratching my head on how to include the T&T on an alox version, but I think maybe making an inner layer that takes them is the only way to go.
I think the idea on the monster 58 build page would work just fine.

If you need that part designed and laser cut from clear acrylic, let me know. I have been after a mini monster since I saw it!
That might be faster... hmm. I started prototyping one from polycarbonate to see how I like the idea though. I just have to cut the channels for the T&T. I couldnt decide it it should clear or solid. I'll make one with the polycarb and if I dont like it, I'll probably do polished Ti as I have some scrap the right size. Luckily 1/8 material works perfect and since this is for a monster extra width isnt a big deal.

Both tools actually fit nicely horizontally, but its not possible to actually remove them once you have liners on, so that method pictured is the only decent way to do it that I can think of. Its just a matter of leaving the tiniest lip exposed to get them out.
Uhm... Where's the Pin's slot?
-
Great guide..

-
Hey thanks for taking the time to post up all the pics.
I love to see how other folks work on SAKs.So far Ive only tore down one 58 rambler, but I have an obscene amount of donor 58s coming in, and Im excited to build my mini monster. Still scratching my head on how to include the T&T on an alox version, but I think maybe making an inner layer that takes them is the only way to go.
I think the idea on the monster 58 build page would work just fine.

If you need that part designed and laser cut from clear acrylic, let me know. I have been after a mini monster since I saw it!
That might be faster... hmm. I started prototyping one from polycarbonate to see how I like the idea though. I just have to cut the channels for the T&T. I couldnt decide it it should clear or solid. I'll make one with the polycarb and if I dont like it, I'll probably do polished Ti as I have some scrap the right size. Luckily 1/8 material works perfect and since this is for a monster extra width isnt a big deal.

Both tools actually fit nicely horizontally, but its not possible to actually remove them once you have liners on, so that method pictured is the only decent way to do it that I can think of. Its just a matter of leaving the tiniest lip exposed to get them out.
Uhm... Where's the Pin's slot?
Ha, good point. Might as well add the pin too!
-
[quote author=Syph007 link=topic=43271.msg1#msg1 date=1361540260]
Hey thanks for taking the time to post up all the pics.
I love to see how other folks work on SAKs.So far Ive only tore down one 58 rambler, but I have an obscene amount of donor 58s coming in, and Im excited to build my mini monster. Still scratching my head on how to include the T&T on an alox version, but I think maybe making an inner layer that takes them is the only way to go.
I think the idea on the monster 58 build page would work just fine.

If you need that part designed and laser cut from clear acrylic, let me know. I have been after a mini monster since I saw it!
That might be faster... hmm. I started prototyping one from polycarbonate to see how I like the idea though. I just have to cut the channels for the T&T. I couldnt decide it it should clear or solid. I'll make one with the polycarb and if I dont like it, I'll probably do polished Ti as I have some scrap the right size. Luckily 1/8 material works perfect and since this is for a monster extra width isnt a big deal.

Both tools actually fit nicely horizontally, but its not possible to actually remove them once you have liners on, so that method pictured is the only decent way to do it that I can think of. Its just a matter of leaving the tiniest lip exposed to get them out.
Uhm... Where's the Pin's slot?
Ha, good point. Might as well add the pin too!
[/quote]I'm not familiar with the specs of the knife you are making, but would a pen/stylus fit too?
-
Syph, I might have an idea...

-
Yup... I def have an idea... PM inbound

-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login