Show off your Sak mod's!
-
Welcome to the SAK madhouse Bob
Great to see you enjoying your first modding experience - I am in the same boat right now - also with a 58mm mod (well more of a repair!!)As 50ft said some guys here make their own.
Here is archerwin's blogMWDP makes amazing scales for SAKs - But I think he only sells them with the knife - Someone else asked if he sold only scales a while ago, he preferred not to - due to fitting etc
/topic/49104And then we have our amazing Syph - Who does sell his scales - But they only have a slot for the tw - I think he has not found a way to secure the tp in place yet
Look at the later pages and his titanium scales -
New pic of Yew scales - 1st draft. Still need to cut the end holes for the T&T, although migh use Wenger system which will reduce work and look nicer. No varnish or oil on these yet (as I said - first draft) - as they still need a bit of sanding, and I'm tempted to pop them on the miller and cut a little + as a logo... Thoughts?

-
@Rototype said:
New pic of Yew scales - 1st draft. Still need to cut the end holes for the T&T, although migh use Wenger system which will reduce work and look nicer. No varnish or oil on these yet (as I said - first draft) - as they still need a bit of sanding, and I'm tempted to pop them on the miller and cut a little + as a logo... Thoughts?Nice!

I plan to do some scales at some point. I won't be putting a cross or logo on the scales. I understand why people do that, but for me, the scales aren't Swiss. If I've gone to the trouble of making them, they'll have whatever logo I choose or none at all :D
-
@Rototype said:
New pic of Yew scales - 1st draft. Still need to cut the end holes for the T&T, although might use Wenger system which will reduce work and look nicer. No varnish or oil on these yet (as I said - first draft) - as they still need a bit of sanding, and I'm tempted to pop them on the miller and cut a little + as a logo... Thoughts?Very nice looking Classic RT - I love wooden scales - And hope to make my own some day.
I am a big fan of the TT, so would need to include them - But always worried about how to do that bit >:( - Although Archerwin and MWDP seem to manage OK.Using the Wenger system is a** brilliant idea**. - Will you actually use W TT or will you mod V TT to do it - I will have a think and a check on that
:DRe the cross I was planning to stick a regular Vic shield on the SAK (Archerwin does this) - But not sure how secure that would be ???
- I wondered about digging out a bit of wood to fit it - But that would be very delicate and tricky work.
Just a cut cross would be OK too
- I wondered about digging out a bit of wood to fit it - But that would be very delicate and tricky work.
-
@Huntsman said:
Using the Wenger system is a** brilliant idea**. - Will you actually use W TT or will you mod V TT to do it - I will have a think and a check on that
:DThat is an interesting idea. Gives the scales a cleaner look too. It seems the Wenger toothpick and tweezers are still readily available as spares so it seems like a very viable option. Do the Wenger ones require a cutout in the liner to accommodate the heads of the T&T?
-
Greetings everyone. I am new in this forum. English is not my native language, please excuse me for any misspelling.
Few years ago I decided to buy SAK. I was looking for pocket friendly, 84mm, one layer and Victorinox Waiter seemed a good choice. I found that I rarely used the corkscrew and I start to think about modification.
I bought a second Waiter because I did not want to risk my favorite knife and this is the result:



-
And the almost finished product:




-
Welcome timganev! Great post - nice mod and something we don't see here too often. Your English is, as most non English members here, excellent and puts most of us native speakers to shame.

Is this your first mod or are there others to show?

-
@magentus said:
Welcome timganev! Great post - nice mod and something we don't see here too often. Your English is, as most non English members here, excellent and puts most of us native speakers to shame.
Is this your first mod or are there others to show?

Thank you!
This is my third mod, but the first two are more like hmm… unfinished prototypes :)
(small wallet friendly Wenger and 2 layer Victorinox ) -
Awesome mod... truly out of the box... welcome... did you make the scales yourself? would love to see your first 2 mods as well...

Sent from my iPhone using Tapatalk
-
And the almost finished product:

How did you solder the bit holder to the corkscrew part ?
This mod is something I should give a try, but with smaller bit holder (like small electronic multi-bit drivers)It looks like a weld to me. My (not very well informed) guess is that any kind of weld should work fine but that a magnet might not survive.
I really like the mod and this seems like something Victorinox should do themselves and that could be a new answer to the Phillips or corkscrew debate. Well done!
-
@m47mu74nt said:

How did you solder the bit holder to the corkscrew part ?
This mod is something I should give a try, but with smaller bit holder (like small electronic multi-bit drivers)I did not have power tools.
Cutting, filing and sanding - handmade
I found small workshop and the man there repair everything from cars to
boilers. I bought him а coffee and he did the welding for free. Then I put back the magnet in the bit holder and again filing and sanding… :D
I like the standard bits because if I ruined it is easy to replace it with another one -
@Fortytwo said:
...
I really like the mod and this seems like something Victorinox should do themselves and that could be a new answer to the Phillips or corkscrew debate. Well done!+1 Welcome to the forums timganev

One word of caution, though, the aluminium liners and little brass pin can't take much force

-
@Fortytwo said:
It looks like a weld to me. My (not very well informed) guess is that any kind of weld should work fine but that a magnet might not survive.
I really like the mod and this seems like something Victorinox should do themselves and that could be a new answer to the Phillips or corkscrew debate. Well done!Thank you!
Yes it was welded… I also was afraid for the magnet
and you can see it removed on the 4th picture... -
Awesome mod... truly out of the box... welcome... did you make the scales yourself? would love to see your first 2 mods as well...

Sent from my iPhone using TapatalkThese are the original scales (ecoline) after cutting, sanding and polishing and they need more work
Looks great

Sent from my iPhone using Tapatalk
-
Very interesting mod timganev, and welcome

Sent from my SM-G920R4 using Tapatalk
-
Awesome mod... truly out of the box... welcome... did you make the scales yourself? would love to see your first 2 mods as well...

Sent from my iPhone using TapatalkThese are the original scales (ecoline) after cutting, sanding and polishing and they need more work
Nice result!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
