Show off your Sak mod's!
-
Awesome mod... truly out of the box... welcome... did you make the scales yourself? would love to see your first 2 mods as well...

Sent from my iPhone using Tapatalk
-
And the almost finished product:

How did you solder the bit holder to the corkscrew part ?
This mod is something I should give a try, but with smaller bit holder (like small electronic multi-bit drivers)It looks like a weld to me. My (not very well informed) guess is that any kind of weld should work fine but that a magnet might not survive.
I really like the mod and this seems like something Victorinox should do themselves and that could be a new answer to the Phillips or corkscrew debate. Well done!
-
@m47mu74nt said:

How did you solder the bit holder to the corkscrew part ?
This mod is something I should give a try, but with smaller bit holder (like small electronic multi-bit drivers)I did not have power tools.
Cutting, filing and sanding - handmade
I found small workshop and the man there repair everything from cars to
boilers. I bought him а coffee and he did the welding for free. Then I put back the magnet in the bit holder and again filing and sanding… :D
I like the standard bits because if I ruined it is easy to replace it with another one -
@Fortytwo said:
...
I really like the mod and this seems like something Victorinox should do themselves and that could be a new answer to the Phillips or corkscrew debate. Well done!+1 Welcome to the forums timganev

One word of caution, though, the aluminium liners and little brass pin can't take much force

-
@Fortytwo said:
It looks like a weld to me. My (not very well informed) guess is that any kind of weld should work fine but that a magnet might not survive.
I really like the mod and this seems like something Victorinox should do themselves and that could be a new answer to the Phillips or corkscrew debate. Well done!Thank you!
Yes it was welded… I also was afraid for the magnet
and you can see it removed on the 4th picture... -
Awesome mod... truly out of the box... welcome... did you make the scales yourself? would love to see your first 2 mods as well...

Sent from my iPhone using TapatalkThese are the original scales (ecoline) after cutting, sanding and polishing and they need more work
Looks great

Sent from my iPhone using Tapatalk
-
Very interesting mod timganev, and welcome

Sent from my SM-G920R4 using Tapatalk
-
Awesome mod... truly out of the box... welcome... did you make the scales yourself? would love to see your first 2 mods as well...

Sent from my iPhone using TapatalkThese are the original scales (ecoline) after cutting, sanding and polishing and they need more work
Nice result!
-
Welcome aboard, Tim. This is an OUTSTANDING mod, even if you are limited to the amount of torq you can put on it. I hope you keep us updated on it as you use it.
@timganev said:
Yes I also think that aluminium liners are disadvantage and I will like to try steel liners next time...I was thinking something like alox, but more inox, using stainless scales/liner combo. As much as I love my Compact as is, this mod probably with the hook removed to make way for the bit holder's girth, would be a great EDC option.
-
@ironraven said:
... with the hook removed to make way...Three easy mods:
Picture 1 - Transforming Victorinox Parcel Hook (I hate this thing :) ) into pry bar
Picture 2 - Putting edge on Wenger punch
Picture 3 – A 10 seconds mod - transport small safety pin into the corkscrew


-
I like the safety pin idea

-
Using the Wenger system is a** brilliant idea**. - Will you actually use W TT or will you mod V TT to do it - I will have a think and a check on that
:DThat is an interesting idea. Gives the scales a cleaner look too. It seems the Wenger toothpick and tweezers are still readily available as spares so it seems like a very viable option. Do the Wenger ones require a cutout in the liner to accommodate the heads of the T&T?
They do need a slight cutout, less than 1mm although you have to be accurate with cutting the slots in the scales to make sure they don't catch on the blades. If you leave then slightly proud of the surface then they're a little easier to 'deploy'. Still waiting for the rounding cutter to arrive so when it does I can start on the next ones.
-
@timganev said:
Greetings everyone. I am new in this forum. English is not my native language, please excuse me for any misspelling.
Few years ago I decided to buy SAK. I was looking for pocket friendly, 84mm, one layer and Victorinox Waiter seemed a good choice. I found that I rarely used the corkscrew and I start to think about modification.
I bought a second Waiter because I did not want to risk my favorite knife and this is the result:Ya beat me to it....
I've been thinking for a while about adding a similar device to a Camper/Huntsman, although I was thinking of using the 4mm system (like the CyberTools) and adding it as a second back tool on the other side (so I can have the interchangable bits AND the corkscrew). Another advantage if you use the 4mm system is that you can cut slots in the scales and carry a few bits with you. The one thing I'm holding bck on so far is that I'd also like it to be useable in the flat position (so it can be used as a screwdriver rather than a T handle) but I still have to figure out how to have it extending out (and locking on place) to do this.Personally, my 'Corkscrew mod' on the Waiter (also a favourite of mine) is to centralise it between the 2 scales which will smooth the lines out as the scales can then wrap around it (OK, finger cutout needed) but this will be with Yew wood scales, just a matter of finding 1/2 day to get everything in place to do it.
-
@50ft-trad said:
@Bob Wolfson said:
**
Off topic question: does anyone make custom scales that accept the toothpick and tweezers?**Yes, you! You've just not mastered it yet :D
Seriously, give it a go.
So I did. Gave it a go, that is! Mastery will take some time.
Each scale is 4 ply of 1/32 thick aluminum.

-
Simple classic SD inside.

-
Congratulations Bob 
Nice job!

-
Very nice! What a great idea!

-
@Bob Wolfson said:
@50ft-trad said:
@Bob Wolfson said:
**
Off topic question: does anyone make custom scales that accept the toothpick and tweezers?**Yes, you! You've just not mastered it yet :D
Seriously, give it a go.
So I did. Gave it a go, that is! Mastery will take some time.
Each scale is 4 ply of 1/32 thick aluminum.
That's an excellent idea to use multiple layers, I [was about to / wished to] do the same work with some brass sheets ( one to use as spacer and multiple layers for scales with cut-outs and each layer welded to the other)
Considering your result, I might give it a go!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
