Show off your Sak mod's!
-
Awesome mod... truly out of the box... welcome... did you make the scales yourself? would love to see your first 2 mods as well...

Sent from my iPhone using TapatalkThese are the original scales (ecoline) after cutting, sanding and polishing and they need more work
Nice result!
-
Welcome aboard, Tim. This is an OUTSTANDING mod, even if you are limited to the amount of torq you can put on it. I hope you keep us updated on it as you use it.
@timganev said:
Yes I also think that aluminium liners are disadvantage and I will like to try steel liners next time...I was thinking something like alox, but more inox, using stainless scales/liner combo. As much as I love my Compact as is, this mod probably with the hook removed to make way for the bit holder's girth, would be a great EDC option.
-
@ironraven said:
... with the hook removed to make way...Three easy mods:
Picture 1 - Transforming Victorinox Parcel Hook (I hate this thing :) ) into pry bar
Picture 2 - Putting edge on Wenger punch
Picture 3 – A 10 seconds mod - transport small safety pin into the corkscrew


-
I like the safety pin idea

-
Using the Wenger system is a** brilliant idea**. - Will you actually use W TT or will you mod V TT to do it - I will have a think and a check on that
:DThat is an interesting idea. Gives the scales a cleaner look too. It seems the Wenger toothpick and tweezers are still readily available as spares so it seems like a very viable option. Do the Wenger ones require a cutout in the liner to accommodate the heads of the T&T?
They do need a slight cutout, less than 1mm although you have to be accurate with cutting the slots in the scales to make sure they don't catch on the blades. If you leave then slightly proud of the surface then they're a little easier to 'deploy'. Still waiting for the rounding cutter to arrive so when it does I can start on the next ones.
-
@timganev said:
Greetings everyone. I am new in this forum. English is not my native language, please excuse me for any misspelling.
Few years ago I decided to buy SAK. I was looking for pocket friendly, 84mm, one layer and Victorinox Waiter seemed a good choice. I found that I rarely used the corkscrew and I start to think about modification.
I bought a second Waiter because I did not want to risk my favorite knife and this is the result:Ya beat me to it....
I've been thinking for a while about adding a similar device to a Camper/Huntsman, although I was thinking of using the 4mm system (like the CyberTools) and adding it as a second back tool on the other side (so I can have the interchangable bits AND the corkscrew). Another advantage if you use the 4mm system is that you can cut slots in the scales and carry a few bits with you. The one thing I'm holding bck on so far is that I'd also like it to be useable in the flat position (so it can be used as a screwdriver rather than a T handle) but I still have to figure out how to have it extending out (and locking on place) to do this.Personally, my 'Corkscrew mod' on the Waiter (also a favourite of mine) is to centralise it between the 2 scales which will smooth the lines out as the scales can then wrap around it (OK, finger cutout needed) but this will be with Yew wood scales, just a matter of finding 1/2 day to get everything in place to do it.
-
@50ft-trad said:
@Bob Wolfson said:
**
Off topic question: does anyone make custom scales that accept the toothpick and tweezers?**Yes, you! You've just not mastered it yet :D
Seriously, give it a go.
So I did. Gave it a go, that is! Mastery will take some time.
Each scale is 4 ply of 1/32 thick aluminum.

-
Simple classic SD inside.

-
Congratulations Bob 
Nice job!

-
Very nice! What a great idea!

-
@Bob Wolfson said:
@50ft-trad said:
@Bob Wolfson said:
**
Off topic question: does anyone make custom scales that accept the toothpick and tweezers?**Yes, you! You've just not mastered it yet :D
Seriously, give it a go.
So I did. Gave it a go, that is! Mastery will take some time.
Each scale is 4 ply of 1/32 thick aluminum.
That's an excellent idea to use multiple layers, I [was about to / wished to] do the same work with some brass sheets ( one to use as spacer and multiple layers for scales with cut-outs and each layer welded to the other)
Considering your result, I might give it a go! -
My 7 year old son has been bugging me constantly to give him a SAK, since I have some unused donors and some leftover parts lying around, might as well make him one... Here it is,
Bladeless Manager v1


Here it is together with his flashlight

Sent from my iPhone using Tapatalk
-
@Bob Wolfson said:
@50ft-trad said:
@Bob Wolfson said:
**
Off topic question: does anyone make custom scales that accept the toothpick and tweezers?**Yes, you! You've just not mastered it yet :D
Seriously, give it a go.
So I did. Gave it a go, that is! Mastery will take some time.
Each scale is 4 ply of 1/32 thick aluminum.
That's an excellent idea to use multiple layers, I [was about to / wished to] do the same work with some brass sheets ( one to use as spacer and multiple layers for scales with cut-outs and each layer welded to the other)
Considering your result, I might give it a go!That's some nice work on the micarta... try sandwich brass and aluminum or something else like a layered cake... [emoji8]
Sent from my iPhone using Tapatalk
-
@jaya_man said:
My 7 year old son has been bugging me constantly to give him a SAK, since I have some unused donors and some leftover parts lying around, might as well make him one... Here it is,Bladeless Manager v1


Here it is together with his flashlight

Sent from my iPhone using Tapatalk
Nice one J-Man - He's set up now!

-
My 7 year old son has been bugging me constantly to give him a SAK, since I have some unused donors and some leftover parts lying around, might as well make him one... Here it is,
Bladeless Manager v1


Here it is together with his flashlight

Sent from my iPhone using Tapatalk
Nice one J-Man - He's set up now!

Thx Mags... he's been taking his toys apart the minute he got his first Victorinox [emoji23][emoji1317]
Sent from my iPhone using Tapatalk
-
@m47mu74nt said:
That's an excellent idea to use multiple layers, I [was about to / wished to] do the same work with some brass sheets ( one to use as spacer and multiple layers for scales with cut-outs and each layer welded to the other)
Considering your result, I might give it a go!I've started a pair of scales with aluminum and copper layers. But I find that the softness of the copper actually makes it harder to work with. I think brass would be better.
-
It looks like a weld to me. My (not very well informed) guess is that any kind of weld should work fine but that a magnet might not survive.
I really like the mod and this seems like something Victorinox should do themselves and that could be a new answer to the Phillips or corkscrew debate. Well done!Thank you!
Yes it was welded… I also was afraid for the magnet
and you can see it removed on the 4th picture...Very cool idea! Nicely done, too!

You could try putting in the magnet and held it in place with some epoxy glue.

-
@Bob Wolfson said:
@50ft-trad said:
@Bob Wolfson said:
**
Off topic question: does anyone make custom scales that accept the toothpick and tweezers?**Yes, you! You've just not mastered it yet :D
Seriously, give it a go.
So I did. Gave it a go, that is! Mastery will take some time.
Each scale is 4 ply of 1/32 thick aluminum.
That is brilliant! I think I might use that for myself
-
@pfrsantos said:
Very cool idea! Nicely done, too!

You could try putting in the magnet and held it in place with some epoxy glue.

Thank you 8)
I used super glue. The glue and the magnetic force should keep it in place.
-
Very cool idea! Nicely done, too!

You could try putting in the magnet and held it in place with some epoxy glue.

Thank you 8)
I used super glue. The glue and the magnetic force should keep it in place.Welcome to
timganev
I really love that mod and it looks very well done 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login