Victorinox Executive?
-
I believe I will carry my Executive cause of this thread this weekend


Mine just lives on my keys. :)
Hahah mine too



-
-
Been searching for one and looking at this thread didn't help at all trying to forget it. I had one long time ago in late 80s but lost it. I just cannot find any in reasonable cost with shipping counted in. Some day... :)
-
@Padre said:
Been searching for one and looking at this thread didn't help at all trying to forget it. I had one long time ago in late 80s but lost it. I just cannot find any in reasonable cost with shipping counted in. Some day... :)They are very good for there size for sure
I have neglected mine lately for bigger more feature dense models
:D I think I may give it some pocket time this weekend or if I go out anywhere after works in the evening this week 
-
Getting constant pocket time as of late, it's going to be the whole winter with me for sure.

Appreciating it much more now! -
@ThePeacent said:
Getting constant pocket time as of late, it's going to be the whole winter with me for sure.
Appreciating it much more now!Glad it is getting pocket time Peacent
The Executive is truly a great SAK

-
Nice pic Peacent!

Did you fix yours or get a new one?
Or was it you that had problems with the scissors? -
@Mizedog said:
I like mine, but ye scissor spring keeps moving to the side, and off the scissors which quickly collapses the scissors, and doesn't let them reopen. Does anyone else have this problem? This doesn't happen with my money clip which is the same size. This issue causes enough frustration that I don't carry the knife.Sent from my SAMSUNG-SM-N900A using Tapatalk
The "newer" scissors have a groove under the moving handle for the spring to follow (this design change was some years ago). The old scissors do not and the spring rides on the flat. If the spring is twisted or otherwise malformed slightly it may not track the moving handle well. On the old scissors without the groove it will slip off more easily. The design change was made to address this problem. The more it slips off and gets crunched, the more it can become deformed which increases occurrence frequency. First thing to check is how tight the scissors are. If they're loose enough, the lateral movement of the moving handle can be part of the problem. The scissors are robust to this, so if anything it's a contributor, not the proximate cause. Scissors with screws are simpler to deal with using a jewelers driver. Riveted scissors are not so simple. It takes a flat punch or pin drift (not a pointed center punch), small hammer and a small anvil (like the kind found on the back of a small jewelers bench vise). Peening the rivet with the hammer and flat punch should be done lightly, very, very gradually tightening it. Make the rivet too tight and you'll have a devil of a time getting it to loosen up.
I've had the spring alignment problem with some older 91mm, and on one occasion with an old 58mm. Takes some patience and a small pair of jeweler size needle nose with smooth jaws to adjust the spring mounting and reform its shape. If you don't have or cannot get a pair with smooth jaws, pad serrated jaws with soft cloth. The serrations can nick a spring creating a weak spot. Do this when you have sufficient time to work at it methodically. Patience and careful observation are key. First thing to look for is whether its attachment is centered in the hole and the first part of it from there to the bend lines up with the fixed handle. The next thing to observe is how well the end of the spring tracks on the moving handle. I've had springs line up perfectly when the scissors jaws are open and the end move laterally halfway off the scissors handle when the jaws are closed. Usual issue is a twisted spring, sometimes twisted at the sharp bend in the middle where the spring flexes the most. The first few times I did this it took a while to observe the effect various tweaks made on spring tracking. If all else fails in aligning one to track correctly, throw in the towel and replace the spring. I've never had to do that, but came very close to it with a Deluxe Tinker that was delivered with a badly twisted spring.
John
-
This just arrived.
I'm not allowed to use it cos I'm on a 111mm diet but I can gawp at it. (Check out the amazing German tongue-twister, "Funkenerosionsmaschinenen"!)
Thanks Ebay!
-
I read it as Funken-erosions-machine-nen.

Nice one!
-
It's the longest word I've ever seen on a SAK!
-
@Thunderpants said:
It's the longest word I've ever seen on a SAK!Especially awesome that they did it as an inlay... you could forgive them if they'd cheaped out and screen printed a word like that :)
-
@Thunderpants said:
It's the longest word I've ever seen on a SAK!That is some long word :o Thanks for sharing a pic of it

-
"(Check out the amazing German tongue-twister, "Funkenerosionsmaschinenen"!)"
Wow I'm an idiot. Pablo is right, I've stuck an extra syllable on the end.
-
@Padre said:
Nice pic Peacent!

Did you fix yours or get a new one?
Or was it you that had problems with the scissors?Yeah I had one with broken scissors.

But I got another one three months ago for $8, a very nice deal I couldn't pass, and an excuse to put my old and ffaithful Executive to rest in peace on my shelf.

Now I use the broken one at home, and EDC the newer.

-
Glad to hear that the retired one still gets use

-
@Thunderpants said:
"(Check out the amazing German tongue-twister, "Funkenerosionsmaschinenen"!)"Wow I'm an idiot. Pablo is right, I've stuck an extra syllable on the end.
I actually completely missed that until you pointed it out.

Its like the bananana thing, right?
-
I'd like to get my hands on one if just for the orange peeler. It looks like it could be used for a number of miscellaneous and creative things, like the can opener on a 91/84 mm vic.
Sent from my iPhone using Tapatalk
-
@irona said:
I'd like to get my hands on one if just for the orange peeler. It looks like it could be used for a number of miscellaneous and creative things, like the can opener on a 91/84 mm vic.Sent from my iPhone using Tapatalk
I will vouch for the orange peeler as an awesome orange peeler :o :D It is a very sharp implement that probably doesn't need a screwdriver on the end of it :ahhh :ahhh :ahhh :D
-
I'd like to get my hands on one if just for the orange peeler. It looks like it could be used for a number of miscellaneous and creative things, like the can opener on a 91/84 mm vic.
Sent from my iPhone using Tapatalk
I will vouch for the orange peeler as an awesome orange peeler :o :D It is a very sharp implement that probably doesn't need a screwdriver on the end of it :ahhh :ahhh :ahhh :D
I can also vouch that the package opener also makes a decent orange peeler, although you have to be careful not to cut into the actual orange
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
