What's your latest SAK?
-
-
-
Ho Hum........ So ideally I'd like the old grey mag and the newer file. So 2 Swisschamps then.

Or just get a dirt cheap SAK with the newer file and put it on the Old Swisschamp [emoji16]
Sent from my iPhone using Tapatalk
Might be easier and cheaper.........
Sent from my iPhone using Tapatalk
-
These arrived


Three Classics with emblems of (top to bottom):
- bureau of land management
- fish & wildlife service
- national park service
And a Picnicker with UNHCR logo.
The Picnicker makes a nice set with the Midnite Manager with UNHCR logo I already had:

The three Classics make a nice set with the US Forest service Classic (although the Forest service is part of the Department of Agriculture, and the others are Department of the Interior):

-
-
@glenfiddich1983 said:
These arrived
Three Classics with emblems of (top to bottom):
- bureau of land management
- fish & wildlife service
- national park service
And a Picnicker with UNHCR logo.
The Picnicker makes a nice set with the Midnite Manager with UNHCR logo I already had:
The three Classics make a nice set with the US Forest service Classic (although the Forest service is part of the Department of Agriculture, and the others are Department of the Interior):
Very cool! I'd like some Dutch government issues, don't know if there are any.
-
@Ronald Schröder said:
These arrived

Three Classics with emblems of (top to bottom):
- bureau of land management
- fish & wildlife service
- national park service
And a Picnicker with UNHCR logo.
The Picnicker makes a nice set with the Midnite Manager with UNHCR logo I already had:
The three Classics make a nice set with the US Forest service Classic (although the Forest service is part of the Department of Agriculture, and the others are Department of the Interior):
Very cool! I'd like some Dutch government issues, don't know if there are any.
Not that I know of, except of course the 93mm alox KL and KM series, the 91mm blue KLU series and the 111mm green Interservice models.
-
A nice old Hercules and an even nicer case. Didn't "need" the Hercules as I have a Workchamp on my belt all the time, but I really liked the case. Knife and case were purchased by the seller over in Germany in 1995 and the knife is an older model and doesn't have the long Phillips under the scissors. Also still has a screw in the scissors.
The knife I will carry in my truck I think, the case will be my dress up case when I have to take my Workchamp to a formal ball or something. 😜

That is a very sweet looking sheath.Thanks, it's really well made and the leather is certainly better than current ones. Not sure it's a good thing to buy a knife so you can have the sheath it's in though......

-
@glenfiddich1983 said:
These arrived

Three Classics with emblems of (top to bottom):
- bureau of land management
- fish & wildlife service
- national park service
And a Picnicker with UNHCR logo.
The Picnicker makes a nice set with the Midnite Manager with UNHCR logo I already had:

The three Classics make a nice set with the US Forest service Classic (although the Forest service is part of the Department of Agriculture, and the others are Department of the Interior):

Wow glen........really nice, makes for an interesting collection.........

-
These arrived


Three Classics with emblems of (top to bottom):
- bureau of land management
- fish & wildlife service
- national park service
And a Picnicker with UNHCR logo.
The Picnicker makes a nice set with the Midnite Manager with UNHCR logo I already had:

The three Classics make a nice set with the US Forest service Classic (although the Forest service is part of the Department of Agriculture, and the others are Department of the Interior):

Wow glen........really nice, makes for an interesting collection.........

Thanks!

-
@magentus said:
Does the new clear plastic holder with glass mag have the longer or shorter philips opposite?Did a comparison of the v1 vs v3 Magnifier and opposing in-line Phillips on a late 1970's Woodsman and a 2015 (2014 ??) Woodsman. Same layer tools were used on the Scientist, Explorer, Modeler, Champion, Swisschamp, etc., although the Scientist and possibly the Modeler may have been discontinued before the v2 and v3 magnifiers. As I understand it, the length change was made with the v2 magnifier.
Top to bottom:
* v3 Magnifier and Phillips layer * v1 Magnifier and Phillips layer
Top to bottom:
* v3 Magnifier opposing Phillips * v1 Magnifier opposing Phillips
Top to bottom:
* v3 Magnifier * v1 Magnifier
Left to right:
* v3 Magnifier * v1 Magnifier
Top to bottom:
* v3 Magnifier * v1 Magnifier
Hope this helps some with a visual comparison. I didn't measure them with a calipers, and probably should have. Tried to minimize parallax and perspective distortions of size as much as possible. In fabricating custom SAKs you could mix the v1 magnifier with either Phillips, and the shorter (v2/v3) Phillips with any magnifier. However, you cannot mix the v2/v3 magnifier with the longer (v1 magnifier) Phillips.
John
(who just pulled the trigger today on a used v1 magnifier SwissChamp and have absolutely no clue why) -
Does the new clear plastic holder with glass mag have the longer or shorter philips opposite?
Did a comparison of the v1 vs v3 Magnifier and opposing in-line Phillips on a late 1970's Woodsman and a 2015 (2014 ??) Woodsman. Same layer tools were used on the Scientist, Explorer, Modeler, Champion, Swisschamp, etc., although the Scientist and possibly the Modeler may have been discontinued before the v2 and v3 magnifiers. As I understand it, the length change was made with the v2 magnifier.
Top to bottom:
- v3 Magnifier and Phillips layer
- v1 Magnifier and Phillips layer

Top to bottom:
- v3 Magnifier opposing Phillips
- v1 Magnifier opposing Phillips

Top to bottom:
- v3 Magnifier
- v1 Magnifier

Left to right:
- v3 Magnifier
- v1 Magnifier

Top to bottom:
- v3 Magnifier
- v1 Magnifier

Hope this helps some with a visual comparison. I didn't measure them with a calipers, and probably should have. Tried to minimize parallax and perspective distortions of size as much as possible.
John
Nice job John - you are a busy man!
-
Does the new clear plastic holder with glass mag have the longer or shorter philips opposite?
Did a comparison of the v1 vs v3 Magnifier and opposing in-line Phillips on a late 1970's Woodsman and a 2015 (2014 ??) Woodsman. Same layer tools were used on the Scientist, Explorer, Modeler, Champion, Swisschamp, etc., although the Scientist and possibly the Modeler may have been discontinued before the v2 and v3 magnifiers. As I understand it, the length change was made with the v2 magnifier.
Top to bottom:
* v3 Magnifier and Phillips layer* v1 Magnifier and Phillips layer
Top to bottom:
* v3 Magnifier opposing Phillips* v1 Magnifier opposing Phillips
Top to bottom:
* v3 Magnifier* v1 Magnifier
Left to right:
* v3 Magnifier* v1 Magnifier
Top to bottom:
* v3 Magnifier* v1 Magnifier
Hope this helps some with a visual comparison. I didn't measure them with a calipers, and probably should have. Tried to minimize parallax and perspective distortions of size as much as possible.
John
Nice job John - you are a busy man!
Pulled the trigger on a used SwissChamp with v1 magnifier earlier today and have no clue why!
I've got two Scientist, an Explorer Plus, five Woodsman, and a Champion Plus. Not as if I need another SAK with in-line Phillips. It was bundled with a Manager Lite that had silvertech scales.John
-
@glenfiddich1983 said:
These arrived

Three Classics with emblems of (top to bottom):
- bureau of land management
- fish & wildlife service
- national park service
And a Picnicker with UNHCR logo.
The Picnicker makes a nice set with the Midnite Manager with UNHCR logo I already had:

The three Classics make a nice set with the US Forest service Classic (although the Forest service is part of the Department of Agriculture, and the others are Department of the Interior):

Nice score!

-
CONGRATS on the snags , T14 , Glen x4 , & Aberdrew

-
Does the new clear plastic holder with glass mag have the longer or shorter philips opposite?
Did a comparison of the v1 vs v3 Magnifier and opposing in-line Phillips on a late 1970's Woodsman and a 2015 (2014 ??) Woodsman. Same layer tools were used on the Scientist, Explorer, Modeler, Champion, Swisschamp, etc., although the Scientist and possibly the Modeler may have been discontinued before the v2 and v3 magnifiers. As I understand it, the length change was made with the v2 magnifier.
Top to bottom:
* v3 Magnifier and Phillips layer* v1 Magnifier and Phillips layer
Top to bottom:
* v3 Magnifier opposing Phillips* v1 Magnifier opposing Phillips
Top to bottom:
* v3 Magnifier* v1 Magnifier
Left to right:
* v3 Magnifier* v1 Magnifier
Top to bottom:
* v3 Magnifier* v1 Magnifier
Hope this helps some with a visual comparison. I didn't measure them with a calipers, and probably should have. Tried to minimize parallax and perspective distortions of size as much as possible.
John
Nice job John - you are a busy man!
Pulled the trigger on a used SwissChamp with v1 magnifier earlier today and have no clue why!
I've got two Scientist, an Explorer Plus, five Woodsman, and a Champion Plus. Not as if I need another SAK with in-line Phillips. It was bundled with a Manager Lite that had silvertech scales.John
It's the extra magnifier you needed (subconsciously).....can't ever have too many magnifiers. 😜

-
[quote author=magentus link=topic=21658.msg1372043#msg1372043 date=1478172687]
Does the new clear plastic holder with glass mag have the longer or shorter philips opposite?Did a comparison of the v1 vs v3 Magnifier and opposing in-line Phillips on a late 1970's Woodsman and a 2015 (2014 ??) Woodsman. Same layer tools were used on the Scientist, Explorer, Modeler, Champion, Swisschamp, etc., although the Scientist and possibly the Modeler may have been discontinued before the v2 and v3 magnifiers. As I understand it, the length change was made with the v2 magnifier.
Top to bottom:
* v3 Magnifier and Phillips layer* v1 Magnifier and Phillips layer
Top to bottom:
* v3 Magnifier opposing Phillips* v1 Magnifier opposing Phillips
Top to bottom:
* v3 Magnifier* v1 Magnifier
Left to right:
* v3 Magnifier* v1 Magnifier
Top to bottom:
* v3 Magnifier* v1 Magnifier
Hope this helps some with a visual comparison. I didn't measure them with a calipers, and probably should have. Tried to minimize parallax and perspective distortions of size as much as possible.
John
Nice job John - you are a busy man!
Pulled the trigger on a used SwissChamp with v1 magnifier earlier today and have no clue why!
I've got two Scientist, an Explorer Plus, five Woodsman, and a Champion Plus. Not as if I need another SAK with in-line Phillips. It was bundled with a Manager Lite that had silvertech scales.John
It's the extra magnifier you needed (subconsciously).....can't ever have too many magnifiers. 😜

[/quote]There was one other intriguing thing about it. Has the v1 magnifier and longer Phillips, but all of the post-1991 newer tools, including all five of the back layer tools, sewing eye in the awl, keyring on the opener layer spring and v1 of the mini-driver in the corkscrew (the round one). From the very good photos, it looks to be in superb condition and extremely clean.
Just realized that with the v1 magnifier and long Phillips it technically qualifies for use in the Discontinued Challenge although I'm as yet undecided about using it for the challenge as I've got plenty of completely discontinued SAKs to use.
John
(who needs a belt pouch for it now) -
@jalind said:
There was one other intriguing thing about it. Has the v1 magnifier and longer Phillips, but all of the post-1991 newer tools, including all five of the back layer tools, sewing eye in the awl, keyring on the opener layer spring and v1 of the mini-driver in the corkscrew (the round one).My SwissChamp has all the back tools, rivet scissors, round "pat." mini screwdriver, keyring on opener spring, sewing eye, gray mag and long phillips, case-hardened metal file. I got it in the sealed blister pack and it was dated 2007. I think it may have been actually assembled in 2006.
So basically, older mag/phillips, older mini screwdriver, older metal file, new everything else.
We must of course collect ALL VARIATIONS of the SwissChamp so great snag!
-
No big deal


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
