What's your latest SAK?
-
These arrived


Three Classics with emblems of (top to bottom):
- bureau of land management
- fish & wildlife service
- national park service
And a Picnicker with UNHCR logo.
The Picnicker makes a nice set with the Midnite Manager with UNHCR logo I already had:

The three Classics make a nice set with the US Forest service Classic (although the Forest service is part of the Department of Agriculture, and the others are Department of the Interior):

Wow glen........really nice, makes for an interesting collection.........

Thanks!

-
@magentus said:
Does the new clear plastic holder with glass mag have the longer or shorter philips opposite?Did a comparison of the v1 vs v3 Magnifier and opposing in-line Phillips on a late 1970's Woodsman and a 2015 (2014 ??) Woodsman. Same layer tools were used on the Scientist, Explorer, Modeler, Champion, Swisschamp, etc., although the Scientist and possibly the Modeler may have been discontinued before the v2 and v3 magnifiers. As I understand it, the length change was made with the v2 magnifier.
Top to bottom:
* v3 Magnifier and Phillips layer * v1 Magnifier and Phillips layer
Top to bottom:
* v3 Magnifier opposing Phillips * v1 Magnifier opposing Phillips
Top to bottom:
* v3 Magnifier * v1 Magnifier
Left to right:
* v3 Magnifier * v1 Magnifier
Top to bottom:
* v3 Magnifier * v1 Magnifier
Hope this helps some with a visual comparison. I didn't measure them with a calipers, and probably should have. Tried to minimize parallax and perspective distortions of size as much as possible. In fabricating custom SAKs you could mix the v1 magnifier with either Phillips, and the shorter (v2/v3) Phillips with any magnifier. However, you cannot mix the v2/v3 magnifier with the longer (v1 magnifier) Phillips.
John
(who just pulled the trigger today on a used v1 magnifier SwissChamp and have absolutely no clue why) -
Does the new clear plastic holder with glass mag have the longer or shorter philips opposite?
Did a comparison of the v1 vs v3 Magnifier and opposing in-line Phillips on a late 1970's Woodsman and a 2015 (2014 ??) Woodsman. Same layer tools were used on the Scientist, Explorer, Modeler, Champion, Swisschamp, etc., although the Scientist and possibly the Modeler may have been discontinued before the v2 and v3 magnifiers. As I understand it, the length change was made with the v2 magnifier.
Top to bottom:
- v3 Magnifier and Phillips layer
- v1 Magnifier and Phillips layer

Top to bottom:
- v3 Magnifier opposing Phillips
- v1 Magnifier opposing Phillips

Top to bottom:
- v3 Magnifier
- v1 Magnifier

Left to right:
- v3 Magnifier
- v1 Magnifier

Top to bottom:
- v3 Magnifier
- v1 Magnifier

Hope this helps some with a visual comparison. I didn't measure them with a calipers, and probably should have. Tried to minimize parallax and perspective distortions of size as much as possible.
John
Nice job John - you are a busy man!
-
Does the new clear plastic holder with glass mag have the longer or shorter philips opposite?
Did a comparison of the v1 vs v3 Magnifier and opposing in-line Phillips on a late 1970's Woodsman and a 2015 (2014 ??) Woodsman. Same layer tools were used on the Scientist, Explorer, Modeler, Champion, Swisschamp, etc., although the Scientist and possibly the Modeler may have been discontinued before the v2 and v3 magnifiers. As I understand it, the length change was made with the v2 magnifier.
Top to bottom:
* v3 Magnifier and Phillips layer* v1 Magnifier and Phillips layer
Top to bottom:
* v3 Magnifier opposing Phillips* v1 Magnifier opposing Phillips
Top to bottom:
* v3 Magnifier* v1 Magnifier
Left to right:
* v3 Magnifier* v1 Magnifier
Top to bottom:
* v3 Magnifier* v1 Magnifier
Hope this helps some with a visual comparison. I didn't measure them with a calipers, and probably should have. Tried to minimize parallax and perspective distortions of size as much as possible.
John
Nice job John - you are a busy man!
Pulled the trigger on a used SwissChamp with v1 magnifier earlier today and have no clue why!
I've got two Scientist, an Explorer Plus, five Woodsman, and a Champion Plus. Not as if I need another SAK with in-line Phillips. It was bundled with a Manager Lite that had silvertech scales.John
-
@glenfiddich1983 said:
These arrived

Three Classics with emblems of (top to bottom):
- bureau of land management
- fish & wildlife service
- national park service
And a Picnicker with UNHCR logo.
The Picnicker makes a nice set with the Midnite Manager with UNHCR logo I already had:

The three Classics make a nice set with the US Forest service Classic (although the Forest service is part of the Department of Agriculture, and the others are Department of the Interior):

Nice score!

-
CONGRATS on the snags , T14 , Glen x4 , & Aberdrew

-
Does the new clear plastic holder with glass mag have the longer or shorter philips opposite?
Did a comparison of the v1 vs v3 Magnifier and opposing in-line Phillips on a late 1970's Woodsman and a 2015 (2014 ??) Woodsman. Same layer tools were used on the Scientist, Explorer, Modeler, Champion, Swisschamp, etc., although the Scientist and possibly the Modeler may have been discontinued before the v2 and v3 magnifiers. As I understand it, the length change was made with the v2 magnifier.
Top to bottom:
* v3 Magnifier and Phillips layer* v1 Magnifier and Phillips layer
Top to bottom:
* v3 Magnifier opposing Phillips* v1 Magnifier opposing Phillips
Top to bottom:
* v3 Magnifier* v1 Magnifier
Left to right:
* v3 Magnifier* v1 Magnifier
Top to bottom:
* v3 Magnifier* v1 Magnifier
Hope this helps some with a visual comparison. I didn't measure them with a calipers, and probably should have. Tried to minimize parallax and perspective distortions of size as much as possible.
John
Nice job John - you are a busy man!
Pulled the trigger on a used SwissChamp with v1 magnifier earlier today and have no clue why!
I've got two Scientist, an Explorer Plus, five Woodsman, and a Champion Plus. Not as if I need another SAK with in-line Phillips. It was bundled with a Manager Lite that had silvertech scales.John
It's the extra magnifier you needed (subconsciously).....can't ever have too many magnifiers. 😜

-
[quote author=magentus link=topic=21658.msg1372043#msg1372043 date=1478172687]
Does the new clear plastic holder with glass mag have the longer or shorter philips opposite?Did a comparison of the v1 vs v3 Magnifier and opposing in-line Phillips on a late 1970's Woodsman and a 2015 (2014 ??) Woodsman. Same layer tools were used on the Scientist, Explorer, Modeler, Champion, Swisschamp, etc., although the Scientist and possibly the Modeler may have been discontinued before the v2 and v3 magnifiers. As I understand it, the length change was made with the v2 magnifier.
Top to bottom:
* v3 Magnifier and Phillips layer* v1 Magnifier and Phillips layer
Top to bottom:
* v3 Magnifier opposing Phillips* v1 Magnifier opposing Phillips
Top to bottom:
* v3 Magnifier* v1 Magnifier
Left to right:
* v3 Magnifier* v1 Magnifier
Top to bottom:
* v3 Magnifier* v1 Magnifier
Hope this helps some with a visual comparison. I didn't measure them with a calipers, and probably should have. Tried to minimize parallax and perspective distortions of size as much as possible.
John
Nice job John - you are a busy man!
Pulled the trigger on a used SwissChamp with v1 magnifier earlier today and have no clue why!
I've got two Scientist, an Explorer Plus, five Woodsman, and a Champion Plus. Not as if I need another SAK with in-line Phillips. It was bundled with a Manager Lite that had silvertech scales.John
It's the extra magnifier you needed (subconsciously).....can't ever have too many magnifiers. 😜

[/quote]There was one other intriguing thing about it. Has the v1 magnifier and longer Phillips, but all of the post-1991 newer tools, including all five of the back layer tools, sewing eye in the awl, keyring on the opener layer spring and v1 of the mini-driver in the corkscrew (the round one). From the very good photos, it looks to be in superb condition and extremely clean.
Just realized that with the v1 magnifier and long Phillips it technically qualifies for use in the Discontinued Challenge although I'm as yet undecided about using it for the challenge as I've got plenty of completely discontinued SAKs to use.
John
(who needs a belt pouch for it now) -
@jalind said:
There was one other intriguing thing about it. Has the v1 magnifier and longer Phillips, but all of the post-1991 newer tools, including all five of the back layer tools, sewing eye in the awl, keyring on the opener layer spring and v1 of the mini-driver in the corkscrew (the round one).My SwissChamp has all the back tools, rivet scissors, round "pat." mini screwdriver, keyring on opener spring, sewing eye, gray mag and long phillips, case-hardened metal file. I got it in the sealed blister pack and it was dated 2007. I think it may have been actually assembled in 2006.
So basically, older mag/phillips, older mini screwdriver, older metal file, new everything else.
We must of course collect ALL VARIATIONS of the SwissChamp so great snag!
-
No big deal


-

sheesh... that haul would cover most of my bills for the month!
I'd love to see a BO Pioneer X someday.
As for me here's some "wonderful" pictures from the latest fleabay snag. Some of the most useless photos as far as determining condition, but got'em for $16 shipped so...not the end of the world.
I've been into the 100mm knives these days. Kind of less talked about here. I'm hoping that's a Passenger there, but probably an Explorer...As for the Spartan, it says "USS RANGER CV61".
So I looked her up...kinda sad, they started scraping her last year...appeared in Star Trek 4 ("Niewklear wwwwessals") ("a double dumbass on you") and Top Gun, had a lengthy career.
https://en.wikipedia.org/wiki/USS_Ranger_(CV-61)I'm hoping that's a metal inlay but who knows. Guessing this was probably given out at some function held aboard the ship but perhaps some of the Sailors or militaria collectors here would know.
Condition is probably rough but might clean up.



-
@jalind said:
There was one other intriguing thing about it. Has the v1 magnifier and longer Phillips, but all of the post-1991 newer tools, including all five of the back layer tools, sewing eye in the awl, keyring on the opener layer spring and v1 of the mini-driver in the corkscrew (the round one). From the very good photos, it looks to be in superb condition and extremely clean.Why is this intriguing John?
Nice - yes, interesting - yes, good find etc - But where is the intrigue/mystery ???This configuration would have been around for 14 or so years from '91 to '04/5
What's to look out for on your Champ is: Riveted or screwed scissor joint; Crimper on pliers or not; Locking nub on bottle opener or notJames your Champ does sound interesting you say it is date marked 2007 - Maybe packaged in 2006 - Yet Vic say the mag glass went plastic in 2004!!
PS. Love the mag glass shots above JL - Thanks for that.

As far as I know - and can eyeball !! - the V2 (all plastic) and V3 (glass lens) are pretty much indistinguishable from each other - I think we only found out here that there even was a glass lens when Syph accidentally popped one out when doing a mod a couple of years ago!! -
CONGRATS on the AWESOME snags , MWDP , & James :ahhh 8)

:ahhh
Thought it was a old super tinker, but seller pix didn't show ........ it comes with a Back Scratcher!
Ends up , I swooped n' scooped up a old Hoffritz / Victoria stamped FISHERMAN. 8)
-
There was one other intriguing thing about it. Has the v1 magnifier and longer Phillips, but all of the post-1991 newer tools, including all five of the back layer tools, sewing eye in the awl, keyring on the opener layer spring and v1 of the mini-driver in the corkscrew (the round one). From the very good photos, it looks to be in superb condition and extremely clean.
Why is this intriguing John?
Nice - yes, interesting - yes, good find etc - But where is the intrigue/mystery ???This configuration would have been around for 14 or so years from '91 to '04/5
What's to look out for on your Champ is: Riveted or screwed scissor joint; Crimper on pliers or not; Locking nub on bottle opener or notJames your Champ does sound interesting you say it is date marked 2007 - Maybe packaged in 2006 - Yet Vic say the mag glass went plastic in 2004!!
PS. Love the mag glass shots above JL - Thanks for that.

As far as I know - and can eyeball !! - the V2 (all plastic) and V3 (glass lens) are pretty much indistinguishable from each other - I think we only found out here that there even was a glass lens when Syph accidentally popped one out when doing a mod a couple of years ago!!I had not expected to find the v1 mag to have been used for that long but had not looked at the mag version implementation dates. I've always looked at other clues such as the awl eye, keyring location, scissors spring follower groove, scissors screw, etc.
Regarding tool changes for dating a specific knife I would expect Victorinox to have made them as "running" changes, building out all existing stock of old parts before using a new version, holding back some for the predicted repair stock needed for a given number of years (sometimes called a "lifetime" stock, or build). If a stash of prior version parts was discovered very shortly after that they would probably use them provided there wasn't a dependency on other parts versions (e.g. the Phillips length and magnifier version). Compound this with making production runs of specific models; i.e. I seriously doubt they're not building SwissChamps every day, or even every week, or every month. Agile manufacturing can do model changeovers very quickly, with great accuracy (i.e. without error), but it's not something to be done just because you can. I don't believe Victorinox concerns themselves with a tight configuration control in the months surrounding a version change beyond parts form and fit compatibility. Nor do I believe they concern themselves much, if at all, with age of existing retailer stock.
Regarding when someone bought a knife, store shelf stock age can, at times, be substantial. The Champion (Plus) was discontinued as far as I can tell, prior to 2015 as it's not in the 2015 or 2016 catalogs, and did not find it looking through a complete 2014 catalog just now. It's still readily available new from retailers.
John
-
No big deal


sheesh... that haul would cover most of my bills for the month!
I'd love to see a BO Pioneer X someday.
As for me here's some "wonderful" pictures from the latest fleabay snag. Some of the most useless photos as far as determining condition, but got'em for $16 shipped so...not the end of the world.
I've been into the 100mm knives these days. Kind of less talked about here. I'm hoping that's a Passenger there, but probably an Explorer...As for the Spartan, it says "USS RANGER CV61".
So I looked her up...kinda sad, they started scraping her last year...appeared in Star Trek 4 ("Niewklear wwwwessals") ("a double dumbass on you") and Top Gun, had a lengthy career.
https://en.wikipedia.org/wiki/USS_Ranger_(CV-61)I'm hoping that's a metal inlay but who knows. Guessing this was probably given out at some function held aboard the ship but perhaps some of the Sailors or militaria collectors here would know.
Condition is probably rough but might clean up.

Congrats, I was also watching this one on eBay, but didn't bid on it because the seller didn't ship international and using a freight forwarder for it would have made it too expensive for me :)
-
@cali-SAK-attack said:
CONGRATS on the AWESOME snags , MWDP , & James :ahhh 8)
:ahhh
Thought it was a old super tinker, but seller pix didn't show ........ it comes with a Back Scratcher!
Ends up , I swooped n' scooped up a old Hoffritz / Victoria stamped FISHERMAN. 8)

-
[quote author=jaya_man link=topic=21658.msg1371368#msg1371368 date=1478065376]
[quote author=cali-SAK-attack link=topic=21658.msg1371367#msg1371367 date=1478065138]
JAKARTA or BUST!!!
WOW sounds like a BLAST! :D 8)
link: https://www.youtube.com/watch?v=lYFyhOBhFugCan you buy stuff there?? or just snap up free give-away loot from the individual vendors? ???
Can definitely buy stuff, at the Victorinox booth at least... Not too sure about the military hardware though...

I hear various soldier knives are on display including the US Combat Utility Knife... ah ah ah
Sent from my iPhone using Tapatalk
Wondering what the US Combat Utility Knife is . . .
John
Here you go... it is not the official knife, but is said to be available for purchase by desiring troops...

Sent from my iPhone using Tapatalk
Thanks. This is interesting. I may call them tomorrow and ask to buy one from them, just to see what they say. If you go there and see one "in the flesh" take some photos . . . I'd like to see one. Be certain to ask them how you can buy one!
This poster is being used to market them to U.S. Government agencies and this is fairly common with all manner of stuff folks would like to sell to the U.S. Government. "Available through DLA" means a government agency that wants some quantity of these would have to request DLA (Defense Logistics Agency) to do a procurement of them on their behalf . . . and the agency desiring them would have to cough up the money to pay for it from an appropriate (i.e. legal) place in their budget that's authorized (by Congressional appropriation or agency allocation from an appropriation) for buying these kinds of items.
John
[/quote]
Will definitely do... AUSA also sells them I think...Sent from my iPhone using Tapatalk
[/quote]
As promised... Me, @classicrock and a couple of friends went to IndoDefence 2016 today... Managed to snap a few pics... apoligies for some dark pics...Evolution of the Soldier Knife


Polish Police knife which is basically a rescue tool with the woodsaw added.

Various soldier knives of different countries including the US Combat Utility Knife



Close-up view of the 1891 and 1908 Soldier

As confirmed by Vic reps, the Combat Utility Knife is on limited contract sales.
Sent from my iPhone using Tapatalk
-
@cali-SAK-attack said:
CONGRATS on the AWESOME snags , MWDP , & James :ahhh 8)
:ahhh
Thought it was a old super tinker, but seller pix didn't show ........ it comes with a Back Scratcher!
Ends up , I swooped n' scooped up a old Hoffritz / Victoria stamped FISHERMAN. 8)
Now you're cookin'........very nice, aluminum head on the tweezers and everything......looks like it's ready to use.

-
Put a tiger in your tool box. Wenger Commander for Esso (Exxon).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login