What modded SAK Setup would you call perfect?
-
Black Pioneer (with either black or red shield, don't mind) with scissors layer added and electrician's blade in place of the can opener. My perfect day-to-day knife: two blades, scissors, poky thing, pry bar and a beer opener.
I've tried other modded knives - Explorer with Pliers, SwissChamp minus saw and scaler, Ranger + magnifier/phillips, etc. but for a larger SAK a Cybertool 34 is perfect already, and for a slim one either a Tinker or Electrician hits the spot.
-
@hiraethus said:
Black Pioneer (with either black or red shield, don't mind) with scissors layer added and electrician's blade in place of the can opener. My perfect day-to-day knife: two blades, scissors, poky thing, pry bar and a beer opener.I've tried other modded knives - Explorer with Pliers, SwissChamp minus saw and scaler, Ranger + magnifier/phillips, etc. but for a larger SAK a Cybertool 34 is perfect already, and for a slim one either a Tinker or Electrician hits the spot.
Some good thoughts in this

-
I am one SAK closer to being able to do this mod and only one SAK away from having all the donors now
If I can get the courage and the time to start taking them apart
I will document it as I go 
-
Can't wait

Sent from my iPhone using Tapatalk
-
-
Can't wait


Get on with it man.

Didn't realize you were waiting for

Sent from my iPhone using Tapatalk
-
I still have to source a reasonably priced in-line awl :ahhh After that it should be a go though

-
-
Looking forward to your progress bro

-T -
-
I think a good modded SAK would be a tool only SAK to pair with a dedicated folder.
Maybe I can attempt this soon.
-
@Aberdrew13 said:
I think a good modded SAK would be a tool only SAK to pair with a dedicated folder.Maybe I can attempt this soon.
Who knows I may try something along this lines as well


-
Still without an inline awl :-\ :D I have decided to start disassembly of my other two donors >:D :ahhh I have already popped off the scales of the Champion and took all the extras like the pin, pen, T and T out and put them aside in a spare Altoids tin

Just wondering now though
What is the best way to take off the bushings and still be able to reuse the pin stock? I am thinking a drill would be best and go slowly as to not mess the bushing up but would a file of some type be better 
Also what is the best way to take out the pins in the pruner
Drill? Or since I am not reusing anything but the blade would a file be quicker?<a href="https://flic.kr/p/NYmHEm" target="_blank" rel="noopener noreferrer"><img src="https://c5.staticflickr.com/6/5616/30830177492_03e9d68f54_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161112_195915 by Poncho 65, on Flickr
<a href="https://flic.kr/p/P9J3Eg" target="_blank" rel="noopener noreferrer"><img src="https://c4.staticflickr.com/6/5457/30947503715_1f3ecc66bd_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161112_200747 by Poncho 65, on Flickr
<a href="https://flic.kr/p/NG3vR1" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5653/30645561790_442291c71d_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161112_200752 by Poncho 65, on Flickr
-
New page banana man dance

-
Start on the backside with the corkscrew side facing up... drill the holes using 2.5mm and 2.2mm drill bits respectively... gently loosen and remove to bushing for later use...
I use nail punches to tap out the pins slowly... do this layer per layer so that it will be easy to lay out all the parts... easier this way to remember which goes where... that's how I took this pic

Sent from my iPhone using Tapatalk
-
Awesome jaya thanks for the tips buddy

That diagram will certainly help as well

-
-
Poncho, have a read of this: /topic/9808 - I found it very helpful.

I'd file the ends of the pins on the pruner - as you don't need to keep the scales there's no need to worry about wrecking them.
-
@hiraethus said:
Poncho, have a read of this: /topic/9808 - I found it very helpful.
I'd file the ends of the pins on the pruner - as you don't need to keep the scales there's no need to worry about wrecking them.
You would think I would have known to read that first
I did read it when Gareth first posted it but after 7 years guess I forgot everything I read in it :D Thanks for the link Hi and yes the file route on the pruner seems to be the most effective way to get the blade out since I am not saving the sales on it 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login