What modded SAK Setup would you call perfect?
-
I think a good modded SAK would be a tool only SAK to pair with a dedicated folder.
Maybe I can attempt this soon.
-
@Aberdrew13 said:
I think a good modded SAK would be a tool only SAK to pair with a dedicated folder.Maybe I can attempt this soon.
Who knows I may try something along this lines as well


-
Still without an inline awl :-\ :D I have decided to start disassembly of my other two donors >:D :ahhh I have already popped off the scales of the Champion and took all the extras like the pin, pen, T and T out and put them aside in a spare Altoids tin

Just wondering now though
What is the best way to take off the bushings and still be able to reuse the pin stock? I am thinking a drill would be best and go slowly as to not mess the bushing up but would a file of some type be better 
Also what is the best way to take out the pins in the pruner
Drill? Or since I am not reusing anything but the blade would a file be quicker?<a href="https://flic.kr/p/NYmHEm" target="_blank" rel="noopener noreferrer"><img src="https://c5.staticflickr.com/6/5616/30830177492_03e9d68f54_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161112_195915 by Poncho 65, on Flickr
<a href="https://flic.kr/p/P9J3Eg" target="_blank" rel="noopener noreferrer"><img src="https://c4.staticflickr.com/6/5457/30947503715_1f3ecc66bd_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161112_200747 by Poncho 65, on Flickr
<a href="https://flic.kr/p/NG3vR1" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5653/30645561790_442291c71d_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161112_200752 by Poncho 65, on Flickr
-
New page banana man dance

-
Start on the backside with the corkscrew side facing up... drill the holes using 2.5mm and 2.2mm drill bits respectively... gently loosen and remove to bushing for later use...
I use nail punches to tap out the pins slowly... do this layer per layer so that it will be easy to lay out all the parts... easier this way to remember which goes where... that's how I took this pic

Sent from my iPhone using Tapatalk
-
Awesome jaya thanks for the tips buddy

That diagram will certainly help as well

-
-
Poncho, have a read of this: /topic/9808 - I found it very helpful.

I'd file the ends of the pins on the pruner - as you don't need to keep the scales there's no need to worry about wrecking them.
-
@hiraethus said:
Poncho, have a read of this: /topic/9808 - I found it very helpful.
I'd file the ends of the pins on the pruner - as you don't need to keep the scales there's no need to worry about wrecking them.
You would think I would have known to read that first
I did read it when Gareth first posted it but after 7 years guess I forgot everything I read in it :D Thanks for the link Hi and yes the file route on the pruner seems to be the most effective way to get the blade out since I am not saving the sales on it 
-
Hmmm, kinda got me thinking... Now I have the urge to build a Ranger with minimal backtools (with just corkscrew and awl) and replace the small blade with an inline awl... :sigh:
Sent from my iPhone using Tapatalk
-
@jaya_man said:
Hmmm, kinda got me thinking... Now I have the urge to build a Ranger with minimal backtools (with just corkscrew and awl) and replace the small blade with an inline awl... :sigh:Sent from my iPhone using Tapatalk
If not for wanting the inline Phillips, that would be the way I went pretty much as well

-
Poncho, if you save the scales someone else might be able to make use of them?
Why not practice with the drill, if doesn't matter if you wreck them anyway? Good practice for if you ever want to save the scales? :D -
@Pablo O'Brien said:
Poncho, if you save the scales someone else might be able to make use of them?
Why not practice with the drill, if doesn't matter if you wreck them anyway? Good practice for if you ever want to save the scales? :DSomeone want Claude the Cat scales :D That is what someone etched in them anyways :ahhh They are not to bad of shape so I may try and drill them out and put a saw in it maybe
Good idea Pablo

-
No problem, just my 2 cents. :D
I'm just of the opinion that if you have a alox knife to disassemble and the scales don't matter, its a great opportunity to practice your fine drilling!And if you make a thin alox with saw...

-
I think a good modded SAK would be a tool only SAK to pair with a dedicated folder.
Maybe I can attempt this soon.
Who knows I may try something along this lines as well


I'm thinking, opening layer, magnifying glass and inline Phillips pliers, scissors, maybe saw and file. Backside Phillips, hook, chisel, and awl on back.....
-
@Pablo O'Brien said:
No problem, just my 2 cents. :D
I'm just of the opinion that if you have a alox knife to disassemble and the scales don't matter, its a great opportunity to practice your fine drilling!And if you make a thin alox with saw...

I meant about drilling the pruner pins out ;) I may try and put a saw in this and it will be a saw and only a saw :D I will def take pics of whatever I do though

-
I think a good modded SAK would be a tool only SAK to pair with a dedicated folder.
Maybe I can attempt this soon.
Who knows I may try something along this lines as well


I'm thinking, opening layer, magnifying glass and inline Phillips pliers, scissors, maybe saw and file. Backside Phillips, hook, chisel, and awl on back.....
I would
to see this if you make it cause it sounds awesome


-
Still without an inline awl but I figured I would go ahead and disassemble and clean the champion and take out the pruner blade to prepare for my mod

<a href="https://flic.kr/p/P3tep5" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5627/30876714182_c2eec282c5_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_183213 by Poncho 65, on Flickr
<a href="https://flic.kr/p/AL4G8G" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5799/22814776278_af9cf54270_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_185645 by Poncho 65, on Flickr
<a href="https://flic.kr/p/PaECPw" target="_blank" rel="noopener noreferrer"><img src="https://c5.staticflickr.com/6/5453/30958154676_3730888350_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_185648 by Poncho 65, on Flickr
Then after I got it apart I put it all in warm soapy water to soak
After soaking for a bit I went in with a toothbrush and cleaned it all up 
<a href="https://flic.kr/p/PdLsW4" target="_blank" rel="noopener noreferrer"><img src="https://c8.staticflickr.com/6/5790/30993241575_69bf54ed87_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_192422 by Poncho 65, on Flickr
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login