Show off your Sak mod's!
-
Finally got the mini router bits through so here's the first production prototype. I don't know if I mentioned before but I got a big batch of these from the US (I think they were customs confiscations... hence nothing bladeless) - there were over 100 SDs in there so I need some outlet for them, and I have a large block of Yew so it seemed logical to enhance them (many have advertising on them as well, so I really need to change the scales). Surprisingly it seems like most of them have pretty much never been used, despite being somewhat scuffed...
The finish is Tung Oil (Danish oil basically) and the problem of how to stop the T&T falling out is a bit of a moot point - my problem is how to get them out easily as the slots are milled to such a tolerance they're actually a little stiff :( although I expect with use these will ease off a bit. To the gentleman who was asking about custom scales with T&T slots, Yes, I will be supplying these when I get the production sorted out so it runs a bit smoother, PM me for more details. Once I have the production sorted I see no reason that other materials can't be used - there are some very nice acrylics out there for the pen turning market that will quite nicely slice up to make scales... (I'm looking at some nice pearlescent green ones at the moment.. :)
Like the yew

Did you oil them before fitting or after? I'm making some wood scales for my Apprentice that I'm planning to finish with Danish oil, and oiling the scales before fitting seems easier, but I'm not sure whether epoxy will stick to the oiled surface.I tend to do it afterwards, purely because I like to do a little finish sanding once they're in place, Epoxy? nope, just 4 holes the right size (1/8" diameter x 2mm deep) in the right places, clips straight on just like the original Celador ones. (I use a paper template stuck to the backs with Pritt and pop that in the miller - also helps me get the T&T slots lined up)
-
From the leftover parts of the Executive + bottle opener mod posted previously. Clad in brass.
-
-
Classic SD with brass scales and thin aluminum liners (next to a cellidor model on which the scales are reversed so the T&T are at the keyring end).
-
Finally completed this custom Golfer 84mm... First time to work with Copper... Finishing could be better...





Sent from my iPhone using Tapatalk
Pretty

Thanks...

Sent from my iPhone using Tapatalk
-
@Bob Wolfson said:
Classic SD with brass scales and thin aluminum liners (next to a cellidor model on which the scales are reversed so the T&T are at the keyring end).How is the shield fixed?
(looks like it is aluminium, I tried tin solder to fix the shield on a brass piece with no success on my side) -
@m47mu74nt said:
How is the shield fixed?
(looks like it is aluminium, I tried tin solder to fix the shield on a brass piece with no success on my side)It's an actual Victorinox shield, removed from a cellidor scale by soaking it in alcohol. A magnet attracts it, so not aluminum. It's just superglued.
-
@Bob Wolfson said:
How is the shield fixed?
(looks like it is aluminium, I tried tin solder to fix the shield on a brass piece with no success on my side)It's an actual Victorinox shield, removed from a cellidor scale by soaking it in alcohol. A magnet attracts it, so not aluminum. It's just superglued.
you are right, I didn't tried with a magnet myself before 
-
My new project.
More restoration then mod.
I found this Spartan. It was extremely cheap (about 3 USD), but I was not sure, if it worth it. Terrible condition, blue ecoline scales, broken tip of the main blade, dirty, sticky and almost impossible to open some of the tools. I remove the old scales and boil it in water and soap. Then left it for hours in solvent to kill and clean everything.
Then I started a second project to help me with this one (diy dremel /rotary tool) but I will show it another day. The second project helped me to reshape the tip of the main blade.
I used black scales from old project. I am still keeping the original toothpick. I will use it as a model for a metal one.
The scales and tools need more polishing, but so far I am happy with the result.



-
Nice refurb on that

-
Lovely work again timganev

-
@timganev said:
My new project.
More restoration then mod.
I found this Spartan. It was extremely cheap (about 3 USD), but I was not sure, if it worth it. Terrible condition, blue ecoline scales, broken tip of the main blade, dirty, sticky and almost impossible to open some of the tools. I remove the old scales and boil it in water and soap. Then left it for hours in solvent to kill and clean everything.
Then I started a second project to help me with this one (diy dremel /rotary tool) but I will show it another day. The second project helped me to reshape the tip of the main blade.
I used black scales from old project. I am still keeping the original toothpick. I will use it as a model for a metal one.
The scales and tools need more polishing, but so far I am happy with the result.Blue. Nylon. Scales. !!???!!

-
@m47mu74nt said:
Blue. Nylon. Scales. !!???!!

yes ecoline/nylon
I tried to wash them, but only a sandpaper will do the trick.
I will use the blue scales if i finish my first project one day :) -
This is my side project that helped me with the restoration of the Spartan.
If you combine small chuck (3 USD) with old food chopper(7 USD) you get Frankenstein rotary tool (FrankenDrill / DremelStein :D). It is ugly, powerful (170W) and it freaks me out
. It reshape the tip of the blade for a minute. If you take this as an instructions do not blame me if you lose finger or something. It is a little beast >:D and will bite, if you give it a chance .



-
And this is the finished Spartan



-
Cooool!

-
@Pablo O'Brien said:
Cooool!
+1 and I bet the Frankendremel has a sound and fury to be reckoned with :o :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login