Show off your Sak mod's!
-
From the leftover parts of the Executive + bottle opener mod posted previously. Clad in brass.
-
-
Classic SD with brass scales and thin aluminum liners (next to a cellidor model on which the scales are reversed so the T&T are at the keyring end).
-
Finally completed this custom Golfer 84mm... First time to work with Copper... Finishing could be better...





Sent from my iPhone using Tapatalk
Pretty

Thanks...

Sent from my iPhone using Tapatalk
-
@Bob Wolfson said:
Classic SD with brass scales and thin aluminum liners (next to a cellidor model on which the scales are reversed so the T&T are at the keyring end).How is the shield fixed?
(looks like it is aluminium, I tried tin solder to fix the shield on a brass piece with no success on my side) -
@m47mu74nt said:
How is the shield fixed?
(looks like it is aluminium, I tried tin solder to fix the shield on a brass piece with no success on my side)It's an actual Victorinox shield, removed from a cellidor scale by soaking it in alcohol. A magnet attracts it, so not aluminum. It's just superglued.
-
@Bob Wolfson said:
How is the shield fixed?
(looks like it is aluminium, I tried tin solder to fix the shield on a brass piece with no success on my side)It's an actual Victorinox shield, removed from a cellidor scale by soaking it in alcohol. A magnet attracts it, so not aluminum. It's just superglued.
you are right, I didn't tried with a magnet myself before 
-
My new project.
More restoration then mod.
I found this Spartan. It was extremely cheap (about 3 USD), but I was not sure, if it worth it. Terrible condition, blue ecoline scales, broken tip of the main blade, dirty, sticky and almost impossible to open some of the tools. I remove the old scales and boil it in water and soap. Then left it for hours in solvent to kill and clean everything.
Then I started a second project to help me with this one (diy dremel /rotary tool) but I will show it another day. The second project helped me to reshape the tip of the main blade.
I used black scales from old project. I am still keeping the original toothpick. I will use it as a model for a metal one.
The scales and tools need more polishing, but so far I am happy with the result.



-
Nice refurb on that

-
Lovely work again timganev

-
@timganev said:
My new project.
More restoration then mod.
I found this Spartan. It was extremely cheap (about 3 USD), but I was not sure, if it worth it. Terrible condition, blue ecoline scales, broken tip of the main blade, dirty, sticky and almost impossible to open some of the tools. I remove the old scales and boil it in water and soap. Then left it for hours in solvent to kill and clean everything.
Then I started a second project to help me with this one (diy dremel /rotary tool) but I will show it another day. The second project helped me to reshape the tip of the main blade.
I used black scales from old project. I am still keeping the original toothpick. I will use it as a model for a metal one.
The scales and tools need more polishing, but so far I am happy with the result.Blue. Nylon. Scales. !!???!!

-
@m47mu74nt said:
Blue. Nylon. Scales. !!???!!

yes ecoline/nylon
I tried to wash them, but only a sandpaper will do the trick.
I will use the blue scales if i finish my first project one day :) -
This is my side project that helped me with the restoration of the Spartan.
If you combine small chuck (3 USD) with old food chopper(7 USD) you get Frankenstein rotary tool (FrankenDrill / DremelStein :D). It is ugly, powerful (170W) and it freaks me out
. It reshape the tip of the blade for a minute. If you take this as an instructions do not blame me if you lose finger or something. It is a little beast >:D and will bite, if you give it a chance .



-
And this is the finished Spartan



-
Cooool!

-
@Pablo O'Brien said:
Cooool!
+1 and I bet the Frankendremel has a sound and fury to be reckoned with :o :D

-
Love it T-Ganizzle
Frankendremel 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login