What modded SAK Setup would you call perfect?
-
@Pablo O'Brien said:
No problem, just my 2 cents. :D
I'm just of the opinion that if you have a alox knife to disassemble and the scales don't matter, its a great opportunity to practice your fine drilling!And if you make a thin alox with saw...

I meant about drilling the pruner pins out ;) I may try and put a saw in this and it will be a saw and only a saw :D I will def take pics of whatever I do though

-
I think a good modded SAK would be a tool only SAK to pair with a dedicated folder.
Maybe I can attempt this soon.
Who knows I may try something along this lines as well


I'm thinking, opening layer, magnifying glass and inline Phillips pliers, scissors, maybe saw and file. Backside Phillips, hook, chisel, and awl on back.....
I would
to see this if you make it cause it sounds awesome


-
Still without an inline awl but I figured I would go ahead and disassemble and clean the champion and take out the pruner blade to prepare for my mod

<a href="https://flic.kr/p/P3tep5" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5627/30876714182_c2eec282c5_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_183213 by Poncho 65, on Flickr
<a href="https://flic.kr/p/AL4G8G" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5799/22814776278_af9cf54270_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_185645 by Poncho 65, on Flickr
<a href="https://flic.kr/p/PaECPw" target="_blank" rel="noopener noreferrer"><img src="https://c5.staticflickr.com/6/5453/30958154676_3730888350_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_185648 by Poncho 65, on Flickr
Then after I got it apart I put it all in warm soapy water to soak
After soaking for a bit I went in with a toothbrush and cleaned it all up 
<a href="https://flic.kr/p/PdLsW4" target="_blank" rel="noopener noreferrer"><img src="https://c8.staticflickr.com/6/5790/30993241575_69bf54ed87_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_192422 by Poncho 65, on Flickr
-
After drying it all I figured I would give it a go and see how it was going to go :D I wanted to see if the pruner blade would go into the opening layer

<a href="https://flic.kr/p/PdLovR" target="_blank" rel="noopener noreferrer"><img src="https://c4.staticflickr.com/6/5720/30993226715_5bce2ae6cb_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_204513 by Poncho 65, on Flickr
I realized that I was going to have to make a spacer and I just happened to think about an old Chinese knock off SAK I had taken apart many years ago (it probably was falling apart anyways
:D ) I found the can opener and marked it to make a spacer 
<a href="https://flic.kr/p/AL4BS7" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5321/22814761918_2683294224_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_202713 by Poncho 65, on Flickr
I then took my Dremel and went to work on it

<a href="https://flic.kr/p/AL4BS7" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5321/22814761918_2683294224_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_202713 by Poncho 65, on Flickr
The result was a very decent spacer that was the right width

<a href="https://flic.kr/p/AL4xMd" target="_blank" rel="noopener noreferrer"><img src="https://c3.staticflickr.com/6/5811/22814748178_31e021d475_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_203639 by Poncho 65, on Flickr
-
Now back to assembly
It went smoother than I thought and I used a Champion that I already had to go by for putting it back together 
<a href="https://flic.kr/p/PaExdm" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/6/5791/30958135816_4ce621b00e_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_214308 by Poncho 65, on Flickr
I ended up not having enough pin stock to finish with bushing and peening
but I did get it back together enough to test it all and I am happy with the result
After I get some new pin stock and get the inline awl I am confident that I will be very satisfied with my new creation 
<a href="https://flic.kr/p/AL4uH7" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/6/5737/22814737848_a31010246b_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_214327 by Poncho 65, on Flickr
<a href="https://flic.kr/p/AL4rRL" target="_blank" rel="noopener noreferrer"><img src="https://c3.staticflickr.com/6/5520/22814728258_54520ff665_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_214429 by Poncho 65, on Flickr
-
Now I am wondering what would be a good color for some scales
:D -
Nice work P

-
-
Awesome work Poncho [emoji8][emoji8][emoji8]
Sent from my iPhone using Tapatalk
-
-
Nice!
I especially like the spacer that you made.
-
Great work Ponch! I love the pruner blade idea.
Looking forward to seeing it finished. 
-
Thanks gentlemen
I am very much looking forward to this to be finished as well
:D I have already learnt a few things from the experience as well 

-
Custom SAK... Custom scales!!
Atleast you can give it a try... if it doesn't work you can still buy something else... nothing to lose ;)
-
@Mechanickal said:
Custom SAK... Custom scales!!Atleast you can give it a try... if it doesn't work you can still buy something else... nothing to lose ;)
I have thought of wood
But I want this SAK to have all the bells and whistles of Plus scales and I don't know if I would have the patience to add all the slots
:D -
I think you spend far too much time thinking of wood ponch. :D
:D A SAK that special will have to have some special scales though buddy.
-
Wood? wood wood wood wood!
:D -
Custom SAK... Custom scales!!
Atleast you can give it a try... if it doesn't work you can still buy something else... nothing to lose ;)
I have thought of wood
But I want this SAK to have all the bells and whistles of Plus scales and I don't know if I would have the patience to add all the slots
:D~Uch~Swissbianco's copper scales~uch~

-
What about some Syph scales? Sweet!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Wasn't as hard as I thought it was going to be