What modded SAK Setup would you call perfect?
-
-
Poncho, have a read of this: /topic/9808 - I found it very helpful.

I'd file the ends of the pins on the pruner - as you don't need to keep the scales there's no need to worry about wrecking them.
-
@hiraethus said:
Poncho, have a read of this: /topic/9808 - I found it very helpful.
I'd file the ends of the pins on the pruner - as you don't need to keep the scales there's no need to worry about wrecking them.
You would think I would have known to read that first
I did read it when Gareth first posted it but after 7 years guess I forgot everything I read in it :D Thanks for the link Hi and yes the file route on the pruner seems to be the most effective way to get the blade out since I am not saving the sales on it 
-
Hmmm, kinda got me thinking... Now I have the urge to build a Ranger with minimal backtools (with just corkscrew and awl) and replace the small blade with an inline awl... :sigh:
Sent from my iPhone using Tapatalk
-
@jaya_man said:
Hmmm, kinda got me thinking... Now I have the urge to build a Ranger with minimal backtools (with just corkscrew and awl) and replace the small blade with an inline awl... :sigh:Sent from my iPhone using Tapatalk
If not for wanting the inline Phillips, that would be the way I went pretty much as well

-
Poncho, if you save the scales someone else might be able to make use of them?
Why not practice with the drill, if doesn't matter if you wreck them anyway? Good practice for if you ever want to save the scales? :D -
@Pablo O'Brien said:
Poncho, if you save the scales someone else might be able to make use of them?
Why not practice with the drill, if doesn't matter if you wreck them anyway? Good practice for if you ever want to save the scales? :DSomeone want Claude the Cat scales :D That is what someone etched in them anyways :ahhh They are not to bad of shape so I may try and drill them out and put a saw in it maybe
Good idea Pablo

-
No problem, just my 2 cents. :D
I'm just of the opinion that if you have a alox knife to disassemble and the scales don't matter, its a great opportunity to practice your fine drilling!And if you make a thin alox with saw...

-
I think a good modded SAK would be a tool only SAK to pair with a dedicated folder.
Maybe I can attempt this soon.
Who knows I may try something along this lines as well


I'm thinking, opening layer, magnifying glass and inline Phillips pliers, scissors, maybe saw and file. Backside Phillips, hook, chisel, and awl on back.....
-
@Pablo O'Brien said:
No problem, just my 2 cents. :D
I'm just of the opinion that if you have a alox knife to disassemble and the scales don't matter, its a great opportunity to practice your fine drilling!And if you make a thin alox with saw...

I meant about drilling the pruner pins out ;) I may try and put a saw in this and it will be a saw and only a saw :D I will def take pics of whatever I do though

-
I think a good modded SAK would be a tool only SAK to pair with a dedicated folder.
Maybe I can attempt this soon.
Who knows I may try something along this lines as well


I'm thinking, opening layer, magnifying glass and inline Phillips pliers, scissors, maybe saw and file. Backside Phillips, hook, chisel, and awl on back.....
I would
to see this if you make it cause it sounds awesome


-
Still without an inline awl but I figured I would go ahead and disassemble and clean the champion and take out the pruner blade to prepare for my mod

<a href="https://flic.kr/p/P3tep5" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5627/30876714182_c2eec282c5_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_183213 by Poncho 65, on Flickr
<a href="https://flic.kr/p/AL4G8G" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5799/22814776278_af9cf54270_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_185645 by Poncho 65, on Flickr
<a href="https://flic.kr/p/PaECPw" target="_blank" rel="noopener noreferrer"><img src="https://c5.staticflickr.com/6/5453/30958154676_3730888350_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_185648 by Poncho 65, on Flickr
Then after I got it apart I put it all in warm soapy water to soak
After soaking for a bit I went in with a toothbrush and cleaned it all up 
<a href="https://flic.kr/p/PdLsW4" target="_blank" rel="noopener noreferrer"><img src="https://c8.staticflickr.com/6/5790/30993241575_69bf54ed87_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_192422 by Poncho 65, on Flickr
-
After drying it all I figured I would give it a go and see how it was going to go :D I wanted to see if the pruner blade would go into the opening layer

<a href="https://flic.kr/p/PdLovR" target="_blank" rel="noopener noreferrer"><img src="https://c4.staticflickr.com/6/5720/30993226715_5bce2ae6cb_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_204513 by Poncho 65, on Flickr
I realized that I was going to have to make a spacer and I just happened to think about an old Chinese knock off SAK I had taken apart many years ago (it probably was falling apart anyways
:D ) I found the can opener and marked it to make a spacer 
<a href="https://flic.kr/p/AL4BS7" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5321/22814761918_2683294224_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_202713 by Poncho 65, on Flickr
I then took my Dremel and went to work on it

<a href="https://flic.kr/p/AL4BS7" target="_blank" rel="noopener noreferrer"><img src="https://c7.staticflickr.com/6/5321/22814761918_2683294224_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_202713 by Poncho 65, on Flickr
The result was a very decent spacer that was the right width

<a href="https://flic.kr/p/AL4xMd" target="_blank" rel="noopener noreferrer"><img src="https://c3.staticflickr.com/6/5811/22814748178_31e021d475_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_203639 by Poncho 65, on Flickr
-
Now back to assembly
It went smoother than I thought and I used a Champion that I already had to go by for putting it back together 
<a href="https://flic.kr/p/PaExdm" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/6/5791/30958135816_4ce621b00e_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_214308 by Poncho 65, on Flickr
I ended up not having enough pin stock to finish with bushing and peening
but I did get it back together enough to test it all and I am happy with the result
After I get some new pin stock and get the inline awl I am confident that I will be very satisfied with my new creation 
<a href="https://flic.kr/p/AL4uH7" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/6/5737/22814737848_a31010246b_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_214327 by Poncho 65, on Flickr
<a href="https://flic.kr/p/AL4rRL" target="_blank" rel="noopener noreferrer"><img src="https://c3.staticflickr.com/6/5520/22814728258_54520ff665_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161114_214429 by Poncho 65, on Flickr
-
Now I am wondering what would be a good color for some scales
:D -
Nice work P

-
-
Awesome work Poncho [emoji8][emoji8][emoji8]
Sent from my iPhone using Tapatalk
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Wasn't as hard as I thought it was going to be