What modded SAK Setup would you call perfect?
-
[quote author=Aberdrew13 link=topic=69140.msg1375763#msg1375763 date=1478701395]
I think a good modded SAK would be a tool only SAK to pair with a dedicated folder.Maybe I can attempt this soon.
Who knows I may try something along this lines as well


I'm thinking, opening layer, magnifying glass and inline Phillips pliers, scissors, maybe saw and file. Backside Phillips, hook, chisel, and awl on back.....
I would
to see this if you make it cause it sounds awesome


I may have started looking for mod fodder.....

Quick question though....where are you acquiring pin stock?
[/quote]That's the million dollar question isn't it :D I may hit a hobby shop up and see if I can track any down but I have been looking online as well. 50ft-trad use to supply it on EDCSource for a while bit don't think he does bow and Rotokid was the supplier before him. Now I don't really think anyone here specifically does

-
-
Custom SAK... Custom scales!!
Atleast you can give it a try... if it doesn't work you can still buy something else... nothing to lose ;)
I have thought of wood
But I want this SAK to have all the bells and whistles of Plus scales and I don't know if I would have the patience to add all the slots
:D~Uch~Swissbianco's copper scales~uch~

They look nice but I think for a 91mm SAK they might be a bit heavier than I want

-
and here all I was thinking was red, green, black, yellow etc.
:D -
I have a other question guys
I usually don't care about scratches on tools but what do you guys think would give the best result to remove scratches and polish ??? Figured I might as well do this right If I am going to do it 
-
and here all I was thinking was red, green, black, yellow etc.
:DThink outside the box!

Put the scales inside the SAK! :D
-
I am hopefully gonna be able to pick some pin stock up this weekend and maybe be able to finish putting it together over the holiday weekend maybe
That is unless my honey do list has to be done then
:D -
Find your pin stock?
-
@Aberdrew13 said:
Find your pin stock?Yes I did
but I haven't worked on the knife any so other than that nothing to report
:DI got it at the SMKW but it is 3/32 vs. 2.5 mm and I read on here that it was very close in size so I am going to find out for myself ;)

-
I got some pin stock and now to see about peening

Couple good hammers for the job
Check 
<a href="https://flic.kr/p/PCYzyR" target="_blank" rel="noopener noreferrer"><img src="https://c6.staticflickr.com/6/5791/31267201141_6934c16e4e_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161202_170912 by Poncho 65, on Flickr
Some good pins for the job
Check 
<a href="https://flic.kr/p/PApj1A" target="_blank" rel="noopener noreferrer"><img src="https://c3.staticflickr.com/6/5538/31238077122_3f06dbec6d_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161202_173401 by Poncho 65, on Flickr
<a href="https://flic.kr/p/PP99Nn" target="_blank" rel="noopener noreferrer"><img src="https://c2.staticflickr.com/6/5467/31382233905_08d6437665_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161202_173415 by Poncho 65, on Flickr
With with all of my stuff

<a href="https://flic.kr/p/PP9f7D" target="_blank" rel="noopener noreferrer"><img src="https://c2.staticflickr.com/6/5476/31382251785_6e48c46bc2_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161202_170853 by Poncho 65, on Flickr
I will have to get an inline awl still to be able to finish this SAK but I am wondering how to pack the hole some and remove play by both the pruner blade and the in line awl
Fun project so far and I know more about peening and making SAKs pre install

-
@Poncho65 said:
I got some pin stock and now to see about peening
Couple good hammers for the job
Check 
<a href="https://flic.kr/p/PCYzyR" target="_blank" rel="noopener noreferrer"><img src="https://c6.staticflickr.com/6/5791/31267201141_6934c16e4e_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161202_170912 by Poncho 65, on Flickr
Some good pins for the job
Check 
<a href="https://flic.kr/p/PApj1A" target="_blank" rel="noopener noreferrer"><img src="https://c3.staticflickr.com/6/5538/31238077122_3f06dbec6d_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161202_173401 by Poncho 65, on Flickr
<a href="https://flic.kr/p/PP99Nn" target="_blank" rel="noopener noreferrer"><img src="https://c2.staticflickr.com/6/5467/31382233905_08d6437665_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161202_173415 by Poncho 65, on Flickr
With with all of my stuff

<a href="https://flic.kr/p/PP9f7D" target="_blank" rel="noopener noreferrer"><img src="https://c2.staticflickr.com/6/5476/31382251785_6e48c46bc2_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161202_170853 by Poncho 65, on Flickr
I will have to get an inline awl still to be able to finish this SAK but I am wondering how to pack the hole some and remove play by both the pruner blade and the in line awl
Fun project so far and I know more about peening and making SAKs pre install

Nice peening... better than mine... I had to use an impact drill to the same job...

-
Working from the back of a truck?

-
-
I got some pin stock and now to see about peening

Couple good hammers for the job
Check 
<a href="https://flic.kr/p/PCYzyR" target="_blank" rel="noopener noreferrer"><img src="https://c6.staticflickr.com/6/5791/31267201141_6934c16e4e_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161202_170912 by Poncho 65, on Flickr
Some good pins for the job
Check 
<a href="https://flic.kr/p/PApj1A" target="_blank" rel="noopener noreferrer"><img src="https://c3.staticflickr.com/6/5538/31238077122_3f06dbec6d_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161202_173401 by Poncho 65, on Flickr
<a href="https://flic.kr/p/PP99Nn" target="_blank" rel="noopener noreferrer"><img src="https://c2.staticflickr.com/6/5467/31382233905_08d6437665_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161202_173415 by Poncho 65, on Flickr
With with all of my stuff

<a href="https://flic.kr/p/PP9f7D" target="_blank" rel="noopener noreferrer"><img src="https://c2.staticflickr.com/6/5476/31382251785_6e48c46bc2_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20161202_170853 by Poncho 65, on Flickr
I will have to get an inline awl still to be able to finish this SAK but I am wondering how to pack the hole some and remove play by both the pruner blade and the in line awl
Fun project so far and I know more about peening and making SAKs pre install

Nice peening... better than mine... I had to use an impact drill to the same job...

I tried it with the battery operated one but not enough hammer to it :ahhh So I went with the small ball peen and it did very well once I got the hang of it

-
I did end up using the drill for sanding down one of them to the smaller 2.25mm pins though

-
@Poncho65 said:
I am wondering how to pack the hole some and remove play by both the pruner blade and the in line awlI don't think you'll need to. As long as you get the thickness right with a washer if you need it to take out side-to-side play then the backspring will keep the tools tight against the pivot even if the hole is bigger. Vic do this with the electricians blade on the 91 and 84mm knives already, and I've done it with some pliers I drilled out to 3mm but ended up using in a 91mm knife mod and there's no noticeable play.

-
I am wondering how to pack the hole some and remove play by both the pruner blade and the in line awl
I don't think you'll need to. As long as you get the thickness right with a washer if you need it to take out side-to-side play then the backspring will keep the tools tight against the pivot even if the hole is bigger. Vic do this with the electricians blade on the 91 and 84mm knives already, and I've done it with some pliers I drilled out to 3mm but ended up using in a 91mm knife mod and there's no noticeable play.

May not need it with the in line awl but the pruner blade pivot may be bigger than 3mm
It isn't terribly bad when I had it together before but it was a bit floppy up and down but it did lock into place one fully opened
I never had it tight though because the pins were to short and they may make a world of difference 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login