New BO Swisstool
-
@Top-Gear-24 said:
P.S.: I ordered my Spirit RT at the local outdoor shop (Victorinox dealer) years ago, and I "only" paid around 138 Euro for it, if I'm not mistaken.Sounds about right, the Euro/CHF exchange rate used to be much higher (If you bought it before 2014, then it was probably somewhere around 1.20 CHF == 1 Euro)
-
[quote author=Thunderpants link=topic=69116.msg1371995#msg1371995 date=1478163631]
What's new about them?Nothing, I think.
They changed the part number x.xxxx.xCCH to x.xxxx.xCN for the Spirit, but AFAICT the SwissTool hasn't changed.I just got the PDF, that they are new available.
Not sure, if they were discontinued for a while or were not officially available, or they were limited.I'm never on the level with this as I still can go to the store and buy an RT.
I'd kill to get an RT...
:ahhh :ahhh :ahhh
And I only live like a one hour drive away from you ...
<a href="http://s739.photobucket.com/user/Rikske77/media/Victorinox Spirit Road Tour/IMG_7247.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Victorinox Spirit Road Tour/IMG_7247.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Victorinox Spirit Road Tour/IMG_7291.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Victorinox Spirit Road Tour/IMG_7291.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Victorinox Spirit Road Tour/IMG_7308.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Victorinox Spirit Road Tour/IMG_7308.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Victorinox Spirit Road Tour/IMG_7324.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Victorinox Spirit Road Tour/IMG_7324.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Victorinox Spirit Collection/SpiritColO_zps3be03cf7.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Victorinox Spirit Collection/SpiritColO_zps3be03cf7.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
But I must warn you, there's always something sharp and pointy within arm's reach here, and I only sleep like 4 hours a day, the rest of the day I spend my time lurking on this one forum on the net ...
P.S.: I ordered my Spirit RT at the local outdoor shop (Victorinox dealer) years ago, and I "only" paid around 138 Euro for it, if I'm not mistaken.
[/quote]
You post way to little to be on here 14 hours a day.Maybe I should observe your way of life from a distance for a few weeks so I know your paterns...
Or I could just invite you over for some coffee, talk about SAK's and politely ask if I could look at it once... Might save me from jail time...
Edit: even the sheath it comes with is

-
I might get my first SwissTool if these are available... Anyone know if these will be widely disributed? Look interesting
-
If only the blade didn't lock I'd happily swap my Leatherman Knifeless Fuse for this...
-
When I've got my SwiisTool BO (previous version - without crimper on pliers) I was seriously disapointed with a quality of coating.
Can anybody confirm that it's a normal situation?P.S. By the way, I'm also looking for Spirit RT for reasonable price.. My collection is waiting for it :D
-
@LeaF said:
When I've got my SwiisTool BO (previous version - without crimper on pliers) I was seriously disapointed with a quality of coating.
Can anybody confirm that it's a normal situation?P.S. By the way, I'm also looking for Spirit RT for reasonable price.. My collection is waiting for it :D
Perfectly normal.
when NIB, the tool is deep black, but some colouring comes off as a left over from the process.After a good rubdown, the black will be less deep, more like dark grey and usualy stay like this for quite some time.
The colour will come off with alot of use though
Edit: it does seem like your 2 handles came out different though...
-
@LeaF said:
When I've got my SwiisTool BO (previous version - without crimper on pliers) I was seriously disapointed with a quality of coating.
Can anybody confirm that it's a normal situation?I recently got a Spirit S BO that was unused (advertised as such and none of the tools show any signs of wear), but the finish was in a similar condition. What's funny is how even with a black oxide finish, it's still sorta shiny; it has that almost oily sheen to it. My other BO SwissTools / Spirits have a similar appearance, but not to the same degree. As far as I know, it's just a byproduct of how they do things.
-
These are listed on Victorinox's USA site now: https://www.victorinox.com/us/en/Products/Swiss-Army-Knives/SwissTools/c/SAK_SwissTool
They're a bit more pricey than I expected, to be honest. I'm hoping places like SwissKnifeShop will get them down a bit, at least to $150 but lower would be nice. Might take a while since they tend to fetch fairly high prices on eBay right now. -
When I've got my SwiisTool BO (previous version - without crimper on pliers) I was seriously disapointed with a quality of coating.
Can anybody confirm that it's a normal situation?I recently got a Spirit S BO that was unused (advertised as such and none of the tools show any signs of wear), but the finish was in a similar condition. What's funny is how even with a black oxide finish, it's still sorta shiny; it has that almost oily sheen to it. My other BO SwissTools / Spirits have a similar appearance, but not to the same degree. As far as I know, it's just a byproduct of how they do things.
In German they call it "brüniert" which technically speaking is an oxide coating, but is more like burnished. It was traditionally made by applying linseed oil to a hot steel surface (>400C) repeatedly and was used for tooling and military applications. If they use that method it would explain the oily shine and the rubbing off.
-
When I've got my SwiisTool BO (previous version - without crimper on pliers) I was seriously disapointed with a quality of coating.
Can anybody confirm that it's a normal situation?I recently got a Spirit S BO that was unused (advertised as such and none of the tools show any signs of wear), but the finish was in a similar condition. What's funny is how even with a black oxide finish, it's still sorta shiny; it has that almost oily sheen to it. My other BO SwissTools / Spirits have a similar appearance, but not to the same degree. As far as I know, it's just a byproduct of how they do things.
In German they call it "brüniert" which technically speaking is an oxide coating, but is more like burnished. It was traditionally made by applying linseed oil to a hot steel surface (>400C) repeatedly and was used for tooling and military applications. If they use that method it would explain the oily shine and the rubbing off.
Cool, thanks for the info! Do you know how this compares with the black oxide coating the Leatherman uses? Actually, it would be cool if we had a general "coatings" thread about black oxide vs. burnished steel vs. Cerakote vs. TiNi — I'd start one, but I don't know anything, I just want to learn. :)
-
When I've got my SwiisTool BO (previous version - without crimper on pliers) I was seriously disapointed with a quality of coating.
Can anybody confirm that it's a normal situation?I recently got a Spirit S BO that was unused (advertised as such and none of the tools show any signs of wear), but the finish was in a similar condition. What's funny is how even with a black oxide finish, it's still sorta shiny; it has that almost oily sheen to it. My other BO SwissTools / Spirits have a similar appearance, but not to the same degree. As far as I know, it's just a byproduct of how they do things.
In German they call it "brüniert" which technically speaking is an oxide coating, but is more like burnished. It was traditionally made by applying linseed oil to a hot steel surface (>400C) repeatedly and was used for tooling and military applications. If they use that method it would explain the oily shine and the rubbing off.
Cool, thanks for the info! Do you know how this compares with the black oxide coating the Leatherman uses? Actually, it would be cool if we had a general "coatings" thread about black oxide vs. burnished steel vs. Cerakote vs. TiNi — I'd start one, but I don't know anything, I just want to learn. :)
Leatherman uses a black oxide powder process (according to their website). This I normally done using a copper-selenium powder and applied with a static charged spray gun. The advantage of the powder process over the hot solution process is, that you don't have to handle boiling, caustic liquids and still achieve a comparable corrosion resistance. The abrasion resistance is lower.
-
@italophil said:
In German they call it "brüniert" which technically speaking is an oxide coating, but is more like burnished. It was traditionally made by applying linseed oil to a hot steel surface (>400C) repeatedlyNext time my wife tells me the oven is dirty, I'll just tell her it's brüniert...
-
Just curious, below picture identifies the Spirit XBS as 3.0224.3CCH. While Victorinox website listed it as 3.0224.3CN... So is there a difference?


-
@metasyntax said:
These are listed on Victorinox's USA site now: https://www.victorinox.com/us/en/Products/Swiss-Army-Knives/SwissTools/c/SAK_SwissTool
They're a bit more pricey than I expected, to be honest. I'm hoping places like SwissKnifeShop will get them down a bit, at least to $150 but lower would be nice. Might take a while since they tend to fetch fairly high prices on eBay right now.Haha, ya, I see they cost over 100% more with the coating. Problem is, Victorinox seems to be adopting the MAP ( min. advertised price) policy like Spyderco and a lot of others. So we may not see them any cheaper. :(
-
BO has been always overrated, I was lucky to get my BO Swisstool this year and it worns out fast, I don't carry my Spirit on a daily base because of this!
-
In German they call it "brüniert" which technically speaking is an oxide coating, but is more like burnished. It was traditionally made by applying linseed oil to a hot steel surface (>400C) repeatedly and was used for tooling and military applications. If they use that method it would explain the oily shine and the rubbing off.
[/quote]Spot on, italophil.

In reply #37, above, by jaya_man, the first ad says "Swisstool Burnished" and the second ad under "key features" says it is "burnished steel."
-
@Okie Shyster said:
In German they call it "brüniert" which technically speaking is an oxide coating, but is more like burnished. It was traditionally made by applying linseed oil to a hot steel surface (>400C) repeatedly and was used for tooling and military applications. If they use that method it would explain the oily shine and the rubbing off.Spot on, italophil.

In reply #37, above, by jaya_man, the first ad says "Swisstool Burnished" and the second ad under "key features" says it is "burnished steel."
[/quote]
In effect, it's just the same, right? -
@Okie Shyster said:
In German they call it "brüniert" which technically speaking is an oxide coating, but is more like burnished. It was traditionally made by applying linseed oil to a hot steel surface (>400C) repeatedly and was used for tooling and military applications. If they use that method it would explain the oily shine and the rubbing off.
Spot on, italophil.

In reply #37, above, by jaya_man, the first ad says "Swisstool Burnished" and the second ad under "key features" says it is "burnished steel."
In effect, it's just the same, right?
[/quote]I'm not sure I understand the question.
If you're asking whether "Swisstool Burnished" and "burnished steel" mean the same thing I'd say the answer is yes.
If you're asking whether burnished steel is the same as the BO process Leatherman uses, the answer is no.
Hope this helps.
-
Looks good but in the flesh so to speak

-
@Okie Shyster said:
@Okie Shyster said:
In German they call it "brüniert" which technically speaking is an oxide coating, but is more like burnished. It was traditionally made by applying linseed oil to a hot steel surface (>400C) repeatedly and was used for tooling and military applications. If they use that method it would explain the oily shine and the rubbing off.
Spot on, italophil.

In reply #37, above, by jaya_man, the first ad says "Swisstool Burnished" and the second ad under "key features" says it is "burnished steel."
In effect, it's just the same, right?
I'm not sure I understand the question.
If you're asking whether "Swisstool Burnished" and "burnished steel" mean the same thing I'd say the answer is yes.
If you're asking whether burnished steel is the same as the BO process Leatherman uses, the answer is no.
Hope this helps.
[/quote]
Thanks ... I meant the first one...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login