What's your latest SAK?
-
As the holiday times approach it's great to see all these SAKs being rescued from shops and ebay and taken in to loving homes. But remember there's still SAKs out there in dusty basements and garages, and we must carry on till they all have somebody to oil and sharpen them. Keep it up guys!
A couple I got today-
Spartan Lite, appears to have the thicker main blade.
SwissChamp, this one I'm not sure about. Has screw scissors with no hook, so pre '91. (I have a Huntsman with screw scissors and hook - confusing), doesn't have the crimpers on the pliers, metal file appears to be slightly different than the case-hardened one, so perhaps it's 2 generations old. Has plus scales with pen. Of course v1 gray may/long phillips. Not sure of the year on this one. But it was $23 so I figured...



-
@ColoSwiss said:
An old rather rare Wenger with imitation tortoiseshell handles.

@adamh said:
Evening everyone, I'm a pretty new collector compared to the bulk of you here, but I did take collection of this xmas 2016 climber today. The images don't really do the blue justice. Interestingly it came with the small screwdriver.
Nice one! -
@JamesJ said:
As the holiday times approach it's great to see all these SAKs being rescued from shops and ebay and taken in to loving homes. But remember there's still SAKs out there in dusty basements and garages, and we must carry on till they all have somebody to oil and sharpen them. Keep it up guys!A couple I got today-
Spartan Lite, appears to have the thicker main blade.
SwissChamp, this one I'm not sure about. Has rivet scissors with no hook (I have a Huntsman with screw scissors and hook - confusing), doesn't have the crimpers on the pliers, metal file appears to be slightly different than the case-hardened one, so perhaps it's 2 generations old. Has plus scales with pen. Of course v1 gray may/long phillips. Not sure of the year on this one. But it was $23 so I figured...
Great catch!

-
@Legenddkk said:
my latest SAKSent from my iPhone using Tapatalk
Nice set up - Not sure which of those two I prefer!
-
New (to me) Skipper .... dreaming of the south sea ....

-
saved and kinda restored this Wenger from previous irresponsible and careless owner

-
@JamesJ said:
As the holiday times approach it's great to see all these SAKs being rescued from shops and ebay and taken in to loving homes. But remember there's still SAKs out there in dusty basements and garages, and we must carry on till they all have somebody to oil and sharpen them. Keep it up guys!A couple I got today-
Spartan Lite, appears to have the thicker main blade.
SwissChamp, this one I'm not sure about. Has screw scissors with no hook, so pre '91. (I have a Huntsman with screw scissors and hook - confusing), doesn't have the crimpers on the pliers, metal file appears to be slightly different than the case-hardened one, so perhaps it's 2 generations old. Has plus scales with pen. Of course v1 gray may/long phillips. Not sure of the year on this one. But it was $23 so I figured...
Great finds and cannot argue the price on the SwissChamp. Regarding it, the hook, scissors and other tool versions, there are several plausible reasons for the mix of them. My best guess is it was fabricated circa 1991, but not necessarily in that year. There's ample anecdotal evidence that Victorinox made running changes in tool versions and finished knife versions. That's done to build out all existing parts stocks, the form and fit of which can still be used in lieu of scrapping them. It's been my experience the only time parts stocks are scrapped is for solving manufacturing quality, or sub-standard product reliability and durability issues. What you may be looking at is a SwissChamp that was built in the midst of several tool version changes, including implementation of the hook, which requires a different spring under the scissors. It's not that dramatic a tool, so they would build out all the old springs before putting the hook in.
Regarding the riveted scissors, it's also plausible the knife was sent back and repaired at some point. It was made over two decades ago. Given Victorinox's very generous "lifetime" guarantee, the scissors may have been replaced some time later in refurbishing or repair with riveted ones. The sewing eye and micro-driver stored in the corkscrew were implemented in 1985 with "Plus" scales that have a ballpoint pen.
Some additional things to look at that reveal clues about fabrication year (keep in mind running changes make years fuzzy):
* Fine screwdriver on back layer and cap lifter with 90 degree stop in 1985 (along with sewing eye in awl) * Scissors spring and groove: spring modified in 1990 with cam end to ride in a groove on the back of the moving scissors handle * Keyring nub location: moved from small blade spacer in blade layer to opener layer spring in 1991 * Fluted corkscrew - one source has fluting eliminated in 1991; another in 1994 (this later year perhaps for economy versions) * Can key slot in back layer Phillips eliminated circa early 1990's (not applicable to SwissChamp) * Striaght Pin hole in scales behind back layer corkscrew/Phillips circa 1993 * Notch added to 90 degree stop on cap lifter and in-line Phillips in 1999 to increase resistance to accidental closing (also added to in-line Phillips)John
-
@JamesJ said:
SwissChamp, this one I'm not sure about. Has screw scissors with no hook, so pre '91. (I have a Huntsman with screw scissors and hook - confusing), doesn't have the crimpers on the pliers, metal file appears to be slightly different than the case-hardened one, so perhaps it's 2 generations old. Has plus scales with pen. Of course v1 gray may/long phillips. Not sure of the year on this one. But it was $23 so I figured...I would disagree John/Jalind :o
I'd say between 1988 (version 2 pliers) and before 1990 (when the 'v' file end pattern came out as opposed to the 'vertical' file pattern end on this knife!)
The scissors are screwed ('92 change) and a grooved corkscrew ('91 change when the hook came in) - so this fits too ;)The Huntsman is explicable too James, as the hook came out in '91 - But the rivet change happened in '92. So you get a quite a few knives with hook and screwed scissors - I have one!

This is my reference...
A new version is due out soon!! -
I got it in today: the Classic SD 2016LE "Rainforest walk".
Here it is on a the cover of a book about formal language theory. Before I became a gardener/forester, I was a computer programmer. My whole life's been about trees.

-
CONGRATS , Ron
8) -
I am so pleased to have finally obtained a beautiful modified Super Tinker... from one of our own members.

Bob


-
:D tiny pic....hope ya got more than 1/8th we get to see.
8) 
-
Cali,
I do, but right now I just want to marvel at that "Blue Ti - Brass thing" going on. Awesome.
It feels and looks like "jewelry"; pocket jewelry. -
@Marc_in_NS said:
I am so pleased to have finally obtained a beautiful modified Super Tinker... from one of our own members.

Bob

Welcome to the club!

-
@cali-SAK-attack said:
CONGRATS , Ron
8)
-
@Marc_in_NS said:
I am so pleased to have finally obtained a beautiful modified Super Tinker... from one of our own members.

Bob

Beautiful!

-
@Marc_in_NS said:
I am so pleased to have finally obtained a beautiful modified Super Tinker... from one of our own members.

Bob

Nice! Can't wait to see the rest! :D
-
Just got this, NIB Victorinox Special Mechanic (also known as the Junior Mechanic) : http://www.sakwiki.com/ti...php?page=Special+Mechanic
I could have got one without the advertising on the scales, but think it actually looks even better like this!



It's a little thinner than a Climber/Super Tinker, so still very pocket-able despite the thick pliers layer:

-
@Oxford_Guy said:
Just got this, NIB Victorinox Special Mechanic (also known as the Junior Mechanic) : http://www.sakwiki.com/ti...php?page=Special+MechanicI could have got one without the advertising on the scales, but think it actually looks even better like this!



It's a little thinner than a Climber/Super Tinker, so still very pocket-able despite the thick pliers layer:

a lot! -
Just got this, NIB Victorinox Special Mechanic (also known as the Junior Mechanic) : http://www.sakwiki.com/ti...php?page=Special+Mechanic
I could have got one without the advertising on the scales, but think it actually looks even better like this!



It's a little thinner than a Climber/Super Tinker, so still very pocket-able despite the thick pliers layer:

a lot!Still available to buy, whilst stocks last, from here: https://www.schweizermess...essen.de/navi.php?a=16971
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login