Powerfix Profi+ (LIDL) Scissors multitool
-
-
-
I think that saw is a drywall configuration. Looks similar in pattern to the dedicated drywall saw I have. The tip is designed to puncture the sheet to allow you to start the cut.
-
-
-
What a nice surprise to see a full size scissors multitool.
They have appeared on Amazon
http://www.amazon.com/Bessey-DMT-Function-Cutting-Driver/dp/B004DCAN8A?ie=UTF8&psc=1&redirect=true&ref_=ox_sc_act_title_1&smid=ATVPDKIKX0DERGonna grab one.
-
Looking at the length of the scissors compared with the length of the handles I suspect there isn't enough leverage to cut anything more substantial than cardboard. I couldn't imagine trying to use them as tin snips (except maybe on thin aluminium foil). All my tin snips have either long handles or compound leverage to give extra power.
But I haven't actually tried them myself so I could be wrong.
-
-
I finally got one of these, and I genuinely like it.
It is branded for Bessey. I'll compare it to the one dks bought, and go over some points he made about it.First of all, the design seems to be slightly altered.
The order of the handle tools seems reversed, and the Phillips and large flathead have swapped positions.Also, the handle inserts are different. Each side has two pieces embedded, and the material is not rubber. It is a hard plastic, which does not improve grip at all.
The sheath is all black, and just as tight as the one dks has. I attached a lanyard to help pull it out. It is quite slippery and very tight in the sheath to pull out as is.
Mine is not rattly when closed, like dks says. Mine is rock solid, nothing rattles.
About the tool set: I love it.
The blade is a very nice shape (although it could be half a cm longer). It is also very nicely sharpened.
The saw is very sharp, and the chisel end is a great scraper.
The file. Man. If the Wingman had a file like this one, it would be twice the price. This file is wonderful.
Phillips, large flathead, and bottle opener are decent. I am glad to see just one dedicated flathead, although there is definitely room for it to have been twice as thick.
The Phillips is like a SOG one, but longer and thicker.There is room for one long tool next to the blade, and there is wasted space under the shears in one handle (the Phillips goes underneath in the other handle).
As mentioned before, the handles are rather slippery, with the inserts being there for mere aesthetic purposes. The handle splay is a definite issue, which will take some time to get used to.
The shears are amazing on my tool. dks says his cannot cut toilet paper, but mine can. It can cut a single ply tissue perfectly. All the way up to cardboard, they are great cutters.
You may have noticed a Phillips bolt having replaced one post screw in my tool. Indeed, the torx8 screw popped out of the post, and would not tighten properly, so I improvised. It feels solid, and does not look half bad. I'll file the bolt down to make it flush with the nut, until I find a better solution. Bloody lucky that I found a bolt with near perfect width and length to replace the post screw. It works so perfectly, I might leave it like that.
Overall, I really like this one. Maybe the design has improved, although there could be more than one factory making these. As with most of these inexpensive tools, it is a bit thick, but it looks and performs beautifully. There is room in the handles for a couple more tools (maybe a reamer, a can opener, package opener, or serrated blade), and I might attempt adding something. A Surge awl would fit the theme nicely.
The Bessey one is significantly more expensive than the Powerfix, but it's still rather affordable, if you feel like picking one up.

-
-
-
-
A thing I missed posting about the tool I bought is that the package says:
"Cuts: leather, rope, vinyl, thin wire, twine, light plastics, paper and more." -
-
Nice write-up dks
I love the scissor based full sized MTs and I do have a couple of the Bear and Son models
I like the spring on these better though as the one on the BaS is a regular spring and if you don't lock the scissors closed before trying to close it up then you might just loose the spring :ahhh :ahhh :ahhh Don't ask me how I know this
I also
the toolset of both the scissor and plier based models 
Sorry that I am over a year late to comment on this but hey better late than never ::)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
